journal article·2021-03

Effect of Different Soldering Temperatures on the Solder Joints of Flip-Chip LED Chips

Xinmeng Zhai, Chengyu Guan, Yuefeng Li, Jun Zou, Mingming Shi, Yang Li

Journal of Electronic Materials· Volume 50· Issue 3
Publisher page

Abstract

This paper investigates the effect of different soldering temperatures on the performance of the flip-chip light-emitting diode (FC-LED) filament during direct soldering. The changes in the intermetallic compound (IMC) interface, push–pull force and chip fracture surface of the chip solder joints under direct soldering temperatures of 220°C, 260°C, and 320°C for the flip-chip LED filament were explored by scanning electron microscopy (SEM). Thereby, the optimal soldering temperature of direct joining in actual production is compared. The results show that when the soldering temperature is 260°C, Cu on the substrate begins to diffuse into the solder and react with the solder in the lower layer. The Sn content is relatively uniform, and the average push–pull force of the chip increases. The fracture occurs from inside the solder. With a soldering temperature of 260°C, it is observed that the interface shear stress of the flip-chip LED chip is the largest, and the mechanical stress and residual stress are the lowest.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker, J. Electron. Mater. 29, 1122 (2000).10.1007/s11664-000-0003-x ↗
2. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
3. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗
4. C.M. Miller, I.E. Anderson, and J.F. Smith, J. Electron. Mater. 23, 595 (1994).10.1007/BF02653344 ↗
5. M.G. Cho, S.K. Kang, and S.H.M. Lee, J. Electron. Mater. 36, 1501 (2007).10.1007/s11664-007-0254-x ↗
6. S.L. Allen, M.R. Notis, R.R. Chromik, R.P. Vinci, D.J. Lewis, and R. Schaefer, J. Mater. Res. 19, 1425 (2004).10.1557/JMR.2004.0191 ↗
7. V.A. Handara, I. Radchenko, S.K. Tippabhotla, K.R. Narayanan, G. Illya, M. Kunz, N. Tamura, and A.S. Budiman, Sol Energy Mater. Solid C 162, 30 (2017).10.1016/j.solmat.2016.12.028 ↗
8. T. Tian, R. Morusupalli, H. Shin, H.Y. Son, K.Y. Byun, Y.C. Joo, R. Caramto, L. Smith, Y.L. Shen, and M. Kunz, Proc. Eng. 139, 101 (2016).10.1016/j.proeng.2015.09.242 ↗
9. A.S. Budiman, H.A.S. Shin, B.J. Kim, S.H. Hwang, H.Y. Son, M.S. Suh, Q.H. Chung, K.Y. Byun, N. Tamura, and M. Kunz, Microelectron. Reliab. 52, 530 (2012).10.1016/j.microrel.2011.10.016 ↗
10. S.K. Tippabhotla, I. Radchenko, K.N. Rengarajan, G. Illya, V. Handara, M. Kunz, N. Tamura, and A.S. Budiman, Proc. Eng. 139, 123 (2016).10.1016/j.proeng.2015.09.241 ↗
11. I. Radchenko, S.K. Tippabhotla, N. Tamura, and A.S. Budiman, J. Electron. Mater. 45, 6222 (2016).10.1007/s11664-016-5012-5 ↗
12. I. Radchenko, H.P. Anwarali, S.K. Tippabhotla, and A.S. Budiman, Acta Mater. 156, 125 (2018).10.1016/j.actamat.2018.06.023 ↗
13. H.P.A. Ali, I. Radchenko, N. Li, and A. Budiman, J. Mater. Res. 34, 1564 (2019).10.1557/jmr.2018.449 ↗
14. Giro and A. Violeta, Comprehens. Anal Chem. 75, 153 (2017).10.1016/bs.coac.2016.10.002 ↗
15. H. Fallahi, M.S. Nurulakmal, A.F. Arezodar, and J. Abdullah, Mater Eng. 553, 22 (2012).10.1016/j.msea.2012.05.086 ↗
16. L. Yang, J. Ge, Y. Zhang, J. Dai, and Y. Jing, J Mater Sci. Mater. El. 26, 613 (2015).10.1007/s10854-014-2443-8 ↗
17. R.M. Shalaby, Cryst. Res. Technol. 45, 427 (2010).10.1002/crat.201000022 ↗
18. M. Yunus, K. Srihari, J.M. Pitarresi, and A. Primavera, Microelectron. Reliab. 43, 2077 (2003).10.1016/S0026-2714(03)00124-0 ↗
19. K. Weinberg, T. Bohme, and W.H. Müller, Comput. Mater. 45, 827 (2009).10.1016/j.commatsci.2008.09.028 ↗
20. D. Kim, J.H. Chang, J. Park, and J. Pak, J Mater Sci. Mater. El. 22, 703 (2011).10.1007/s10854-011-0357-2 ↗
21. C. Ming, C. Lung, and K. Lin, J. Electron. Mater. 32, 1426 (2003).10.1007/s11664-003-0111-5 ↗
22. Z. Huang, P. Kumar, I. Dutta, J.H.L. Pang, and R. Sidhu, Eng. Fract. Mech. 131, 9 (2014).10.1016/j.engfracmech.2014.10.003 ↗
23. M. Du, Q. Guo, Z. Ouyang, K. Wei, and W.G. Hurley, Case Stud. Therm. Eng. 14, 100492 (2019).10.1016/j.csite.2019.100492 ↗
24. I.E. Anderson and J.L. Harringa, J. Electron. Mater. 33, 1485 (2004).10.1007/s11664-004-0090-1 ↗
25. I.E. Anderson, B.A. Cook, J. Harringa, and R.L. Terpstra, J. Electron. Mater. 31, 1166 (2002).10.1007/s11664-002-0006-x ↗
26. T. An and F. Qin, J Electron Packaging. 138, 1224 (2016).10.1115/1.4032349 ↗
27. X. Xi, H. Li, F. Wallin, A. Avelin, X. Yang, and Z. Yu, Energy Proc. 54, 2907 (2019).
28. S.W.M. Ridhuan, S.Kumar Tippabhotla, A.A.O. Tay, and A.S. Budiman, Adv. Eng. Mater. 10, 1002 (2019).
29. Z. Guo, X. Wang, Y. Liu, Y. Liu, and F. Li, J. Constr. Steel Res. 172, 106174 (2020).10.1016/j.jcsr.2020.106174 ↗
30. Y. Lei, C. Xiao, X. Wang, J. Yue, and Q. Zhu, Fusion Eng. Des. 95, 27 (2015).10.1016/j.fusengdes.2015.04.002 ↗
31. P. Peasura and B. Poopat, Adv. Mater. Res. 214, 108 (2011).10.4028/www.scientific.net/AMR.214.108 ↗
32. G. Park, S. Uhm, and C. Lee, Mater. Sci. Eng. A 788, 139477 (2020).10.1016/j.msea.2020.139477 ↗
33. J.M. Song, H.Y. Chuang, and Z.M. Wu, J. Electron. Mater. 36, 1516 (2007).10.1007/s11664-007-0222-5 ↗
34. Y. Kariya, T. Hosoi, S. Terashima, and T.M. Otsuka, J. Electron. Mater. 33, 321 (2004).10.1007/s11664-004-0138-2 ↗
35. A. Kroupa, D. Andersson, N. Hoo, J. Pearce, A. Watson, A. Dinsdale, and S. Mucklejohn, J. Mater. Eng. Perform. 21, 629 (2012).10.1007/s11665-012-0125-3 ↗