Synthesis of SiO2-Coated Core–Shell ZnO Composites for Preparing High-Voltage Varistors
Source abstract
Abstract
Monodispersed ZnO composite microspheres were successfully prepared by a facile ultrasound irradiation method. Then, the uniform core–shell structured composites were synthesized through the hydrolysis of tetraethyl orthosilicate on the surface of the ZnO composite microspheres. Microstructural studies of the as-obtained powders were carried out using the techniques of the x-ray powder diffraction, field emission scanning electron microscopy and transmission electron microscopy with energy dispersive x-ray spectroscopy. The results show that the pink ZnO composite powders as the core were spherical structures with the size of approximately 100 nm, and the SiO2 shell was fully coated on the surface of the core. On the basis of these results, the effect of SiO2 content on the thickness of the synthesized composites and microstructure, as well as the electrical properties of the ZnO varistors sintered in air at 1150°C for 2 h, were fully studied. In particular, the ZnO varistor prepared with the appropriate amount of the SiO2 coating (∼40 nm) leads to a superior electrical performance with the high breakdown voltage of 418 V mm−1 and an excellent nonlinear coefficient of 70.7, compared with the varistors obtained without the SiO2 coating. The high performance is attributed to the smaller and more homogeneous ZnO grains obtained via the SiO2 coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Q. Wang, Y. Qin, G.J. Xu, L. Chen, Y. Li, L. Duan, and P. Cui, Ceram. Int. 34, 1697 (2008).10.1016/j.ceramint.2007.05.012 ↗
2. T.K. Gupta, J. Am. Ceram. Soc. 73, 1817 (1990).10.1111/j.1151-2916.1990.tb05232.x ↗
3. T. Chen, M.H. Wang, H.P. Zhang, J.R. Liu, and D.C. Yao, J. Mater. Electron. 45, 3994 (2016).10.1007/s11664-016-4641-z ↗
4. S.C. Pillai, J.M. Kelly, D.E. McCormack, and R. Ramesh, J. Mater. Chem. 13, 2586 (2003).10.1039/B306280E ↗
5. L. Meng, L.Y. Zheng, L.H. Cheng, G.R. Li, Y. Gu, and F.P. Zhang, J. Mater. Chem. 21, 11418 (2011).10.1039/c1jm10807g ↗
6. H. Kanai and M. Imai, J. Mater. Sci. 23, 4397 (1988).10.1007/BF00551935 ↗
7. R. Goel, A. Sil, and H.R. Anand, Bull. Mater. Sci. 22, 49 (1999).10.1007/BF02745675 ↗
8. N. Canikoglu, N. Toplan, and K. Yildiz, Ceram. Int. 32, 127 (2006).10.1016/j.ceramint.2005.01.007 ↗
9. J. Geng, B. Liu, L. Xu, F.N. Hu, and J.J. Zhu, Langmuir 23, 10286 (2007).10.1021/la701299w ↗
10. M.M. Shirolkar, R. Das, T. Maity, P. Poddar, and S.K. Kulkarni, J. Phys. Chem. C 116, 19503 (2012).10.1021/jp3025683 ↗
11. W.J. Sun, J.R. Liu, D.C. Yao, Y. Chen, and M.H. Wang, J. Electron. Mater. 46, 1908 (2017).10.1007/s11664-016-5257-z ↗
12. S.C. Pillai, J.M. Kelly, R. Ramesh, and D.E. McCormack, J. Mater. Chem. C 1, 3268 (2013).10.1039/c3tc00575e ↗
13. J. Zou, Y.G. Peng, and Y.Y. Tang, RSC Adv. 4, 9693 (2014).10.1039/c3ra47043a ↗
14. S.A. Shojaee, M.M. Shahraki, M.A.F. Sani, and A. Yousefi, J. Mater. Sci. Mater. Electron. 21, 571 (2010).10.1007/s10854-009-9959-3 ↗
15. L. Cheng, G. Li, L. Zheng, J. Zeng, Y. Gu, and F. Zeng, J. Am. Ceram. Soc. 93, 2522 (2010).10.1111/j.1551-2916.2010.03865.x ↗
16. M.W. Barsoum, A. Elkind, and F.A. Selim, J. Am. Ceram. Soc. 79, 962 (1996).10.1111/j.1151-2916.1996.tb08532.x ↗
17. L. Meng, L. Zheng, L. Cheng, Y. Zheng, G. Li, and B. Slavko, J. Am. Ceram. Soc. 94, 2939 (2011).10.1111/j.1551-2916.2011.04453.x ↗
18. T.R.N. Kutty and S. Ezhilvalavan, J. Phys. D Appl. Phys. 29, 809 (1996).10.1088/0022-3727/29/3/045 ↗