journal article·2017-06

Influence of Experimental Installation on Photocatalytic Activity of Sputtered Nb-Doped TiO2 Thin Film

N. M. Hieu, N. T. Lan, N. B. Loc, N. T. T. Hang, N. T. Tien, P. V. Thanh, L. M. Quynh, N. H. Luong, N. L. H. Hoang

Journal of Electronic Materials· Volume 46· Issue 6
Publisher page

Abstract

We present an efficient experimental method to investigate the photocatalytic activity of Nb-doped TiO2 (TNO) polycrystalline film deposited on glass substrate by sputtering. The photocatalytic activity of the thin film was evaluated by oxidative photodegradation of methylene blue (MB) solution at wavelength of 292 nm in the ultraviolet (UV) region. Two ways of installing a UV light source to illuminate the sample were demonstrated: (a) with UV light coming from the front of the thin film through the MB solution, and (b) with UV light coming from the back of the thin film through the glass substrate. Compared with installation (a), which is often applied for photocatalytic activity investigation, the influence of the UV light on the dye solution is removed in installation (b), resulting in significantly improved illuminating light intensity. The results show that the photocatalytic efficiency of the thin film with installation (b) was two times higher than that with installation (a). Thus the proposed approach (b) for installing the UV light source is more promising for investigation of photocatalytic properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. I. Sopyan, S. Murasawa, K. Hashimoto, and A. Fujishima, Photocatalytic Purification and Treatment of Water and Air, ed. D.E. Ollis and H. Al-Ekabi (Amsterdam: Elsevier, 1993), p. 747.
2. P.J. Kelly, G.T. West, M. Ratova, L. Fisher, S. Ostovarpour, and J. Verran, Molecules 19, 16327 (2014).10.3390/molecules191016327 ↗
3. A. Ghosh and A. Mondal, Appl. Surf. Sci. 328, 63 (2015).10.1016/j.apsusc.2014.12.032 ↗
4. J. Yu, X. Zhao, and Q. Zhao, Thin Solid Films 379, 7 (2010).10.1016/S0040-6090(00)01542-X ↗
5. H.W.P. Carvalho, A.P.L. Batista, P. Hammer, and T.C. Ramalho, J. Hazard. Mater. 184, 273 (2010).10.1016/j.jhazmat.2010.08.033 ↗
6. X. Hou, H. Ma, F. Liu, J. Deng, Y. Ai, X. Zhao, D. Mao, D. Li, and B. Liao, J. Hazard. Mater. 299, 59 (2015).10.1016/j.jhazmat.2015.05.014 ↗
7. K. Eufinger, D. Poelman, H. Poelman, R. De Gryse, and G.B. Marin, Thin Solid Films: Process and Applications, ed. S.C. Nam (Trivandrum: Transworld Research Network, 2008), p. 189.
8. S. Anandan, T.N. Rao, M. Sathish, D. Rangappa, I. Honma, and M. Miyauchi, Appl. Mater. Interfaces 5, 207 (2013).10.1021/am302557z ↗
9. K. Bubacz, J. Choina, D. Dolat, and A.W. Morawski, Pol. J. Environ. Stud. 19, 685 (2010).
10. Md. S.A. Sher Shah, A.R. Park, K. Zhang, J.H. Park, and P.J. Yoo, Appl. Mater. Interfaces 4, 3893 (2012).10.1021/am301287m ↗
11. T. Luttrell, S. Halpegamage, E. Sutter, and M. Batzill, Thin Solid Films 564, 146 (2014).10.1016/j.tsf.2014.05.058 ↗
12. Y.H. Wang, X.Q. Liu, and H.Y. Meng, Mater. Res. Bull. 43, 1480 (2008).10.1016/j.materresbull.2007.06.041 ↗
13. Y. Furubayashi, H. Hitosugi, Y. Yamamoto, K. Inaba, G. Kinoda, Y. Hirose, T. Shimada, and T. Hasegawa, Appl. Phys. Lett. 86, 252101 (2005).10.1063/1.1949728 ↗
14. N.L.H. Hoang, N. Yamada, T. Hitosugi, J. Kasai, S. Nakao, T. Shimada, and T. Hasegawa, Appl. Phys. Express 1, 115001 (2008).10.1143/APEX.1.115001 ↗
15. D.S. Bhachu, S. Sathasivam, G. Sankar, D.O. Scanlon, G. Cibin, C.J. Carmalt, I.P. Parkin, G.W. Watson, S.M. Bawaked, A.Y. Obaid, S. Al-Thabaiti, and S.N. Basahel, Adv. Funct. Mater. 24, 5075 (2014).10.1002/adfm.201400338 ↗
16. S. Seegera, K. Ellmerb, M. Weisea, D. Gogovac, D. Abou-Rasb, and R. Mientusa, Thin Solid Films 605, 44 (2016).10.1016/j.tsf.2015.11.058 ↗
17. J. Osorio-Guillen, S. Lany, and A. Zunger, Phys. Rev. Lett. 100, 036601 (2008).10.1103/PhysRevLett.100.036601 ↗
18. B.N. Joshi, H. Yoon, M.F.A.M. van Hest, and S.S. Yoon, J. Am. Ceram. Soc. 96, 2623 (2013).10.1111/jace.12336 ↗
19. X. Li, X. Han, W. Wang, X. Liu, Y. Wang, and X. Liu, Adv. Mater. Res. 455, 110 (2012).10.4028/www.scientific.net/AMR.459.110 ↗
20. D.S. Bhachu, S. Sathasivam, G. Sankar, D.O. Scanlon, G. Cibin, C.J. Carmalt, I.P. Parkin, G.W. Watson, S.M. Bawaked, A.Y. Obaid, S. Al-Thabaiti, and S.N. Basahel, Adv. Funct. Mater. 24, 5075 (2014).10.1002/adfm.201400338 ↗
21. A. Kafizas, C.W. Dunnill, and I.P. Parkin, J. Mater. Chem. 20, 8336 (2010).10.1039/c0jm01244k ↗
22. D. Mardare, M. Tasca, M. Delibas, and G.I. Rusu, Appl. Surf. Sci. 156, 200 (2000).10.1016/S0169-4332(99)00508-5 ↗
23. S. Umrao, P. Sharma, A. Bansal, R. Sinha, R.K. Singh, and A. Srivastva, RSC Adv. 5, 51790 (2015).10.1039/C5RA07310C ↗
24. M. Dobromir, R. Apetrei, A.V. Rogachev, D.L. Kovalenko, and D. Luca, Adv. Mater. Res. 1117, 139 (2015).10.4028/www.scientific.net/AMR.1117.139 ↗
25. A.L. Linsebigler, G.Q. Lu, and J.T. Yates, Chem. Rev. 95, 735 (1995).10.1021/cr00035a013 ↗
26. A. Ameta, R. Ameta, and M. Ahuja, Sci. Rev. Chem. Commun. 3, 172 (2013).
27. J. Schneider, M. Matsuoka, M. Takeuchi, J. Zhang, Y. Horiuchi, M. Anpo, and D.W. Bahnemann, Chem. Rev. 114, 9919 (2014).10.1021/cr5001892 ↗