journal article·2017-05

Thermoelectric Properties of Mg2Si0.995Sb0.005 Prepared by the High-Pressure High-Temperature Method

Jialiang Li, Gang Chen, Bo Duan, Yaju Zhu, Xiaojun Hu, Pengcheng Zhai, Peng Li

Journal of Electronic Materials· Volume 46· Issue 5
Publisher page

Abstract

Mg2Si0.995Sb0.005 compound was prepared by the high-pressure high-temperature (HPHT) method. The simultaneous synthesis and consolidation in one step could be completed in <15 min. The effects of pressure and temperature on the thermoelectric properties of Mg2Si0.995Sb0.005 were analyzed in this work. With the pressure and temperature increasing, the electrical conductivity rises markedly, while the Seebeck coefficient changes slightly, which results in significant enhancement of the power factor. The Mg2Si0.995Sb0.005 sample prepared under the condition of 1073 K and 2 GPa achieves the highest power factor of ∼2.12 × 10−3 W m−1 K−2 at 575 K. As the sample prepared at 973 K and 2 GPa retains a lower thermal conductivity, it obtains the highest thermoelectric figure-of-merit ZT ∼0.62 at 800 K. In conclusion, the HPHT method can serve as a route to prepare Sb-doped Mg2Si thermoelectric materials efficiently.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Expansion and Ionic Conductivity · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M. Ioannou, K. Chrissafis, E. Pavlidou, F. Gascoin, and T. Kyratsi, J. Solid State Chem. 197, 172 (2013).10.1016/j.jssc.2012.08.051 ↗
2. W. Liu, X. Tang, H. Li, K. Yin, J. Sharp, X. Zhou, and C. Uher, J. Mater. Chem. 22, 13653 (2012).10.1039/c2jm31919e ↗
3. W. Liu, Q. Zhang, K. Yin, H. Chi, X. Zhou, X. Tang, and C. Uher, J. Solid State Chem. 203, 333 (2013).10.1016/j.jssc.2013.04.041 ↗
4. S.V. Ovsyannikov and V.V. Shchennikov, Chem. Mater. 22, 635 (2010).10.1021/cm902000x ↗
5. S.V. Ovsyannikov, V.V. Shchennikov, G.V. Vorontsov, A.Y. Manakov, A.Y. Likhacheva, and V.A. Kulbachinskii, J. Appl. Phys. 104, 053713 (2008).10.1063/1.2973201 ↗
6. V. Shchennikov and S. Ovsyannikov, Solid State Commun. 126, 373 (2003).10.1016/S0038-1098(03)00210-2 ↗
7. N. Morozova, S. Ovsyannikov, I. Korobeinikov, A. Karkin, K. Takarabe, Y. Mori, S. Nakamura, and V. Shchennikov, J. Appl. Phys. 115, 213705 (2014).10.1063/1.4881015 ↗
8. J. Zhao, Z. Liu, R.A. Gordon, K. Takarabe, J. Reid, and J.S. Tse, J. Appl. Phys. 118, 145902 (2015).10.1063/1.4933069 ↗
9. W. Ren, Y. Han, C. Liu, N. Su, Y. Li, B. Ma, Y. Ma, and C. Gao, Solid State Commun. 152, 440 (2012).10.1016/j.ssc.2011.11.043 ↗
10. F. Yu, J. Sun, W. Yang, R. Tian, and G. Ji, Solid State Commun. 150, 620 (2010).10.1016/j.ssc.2009.12.031 ↗
11. J. Hao, Z. Guo, and Q. Jin, Solid State Commun. 150, 2299 (2010).10.1016/j.ssc.2010.10.017 ↗
12. J. Hao, B. Zou, P. Zhu, C. Gao, Y. Li, D. Liu, K. Wang, W. Lei, Q. Cui, and G. Zou, Solid State Commun. 149, 689 (2009).10.1016/j.ssc.2009.02.018 ↗
13. P. Zhu, X. Jia, H. Chen, W. Guo, L. Chen, D. Li, H. Ma, G. Ren, and G. Zou, Solid State Commun. 123, 43 (2002).10.1016/S0038-1098(02)00182-5 ↗
14. T. Su, X. Jia, H. Ma, C. Zang, L. Zhou, J. Guo, and N. Dong, Mater. Lett. 62, 3269 (2008).10.1016/j.matlet.2008.02.039 ↗
15. L. Deng, H. Ma, T. Su, F. Yu, Y. Tian, Y. Jiang, N. Dong, S. Zheng, and X. Jia, Mater. Lett. 63, 2139 (2009).10.1016/j.matlet.2009.06.008 ↗
16. S. Fiameni, A. Famengo, F. Agresti, S. Boldrini, S. Battiston, M. Saleemi, M. Johnsson, M.S. Toprak, and M. Fabrizio, J. Electron. Mater. 43, 2301 (2014).10.1007/s11664-014-3048-y ↗
17. J. de Boor, C. Compere, T. Dasgupta, C. Stiewe, H. Kolb, A. Schmitz, and E. Mueller, J. Mater. Sci. 49, 3196 (2014).10.1007/s10853-014-8023-8 ↗
18. J. Tani and H. Kido, Intermetallics 32, 72 (2013).10.1016/j.intermet.2012.08.026 ↗
19. M. Saleemi, M.S. Toprak, S. Fiameni, S. Boldrini, S. Battiston, A. Famengo, M. Stingaciu, M. Johnsson, and M. Muhammed, J. Mater. Sci. 48, 1940 (2012).10.1007/s10853-012-6959-0 ↗
20. M. Ioannou, E. Hatzikraniotis, C. Lioutas, T. Hassapis, T. Altantzis, K.M. Paraskevopoulos, and T. Kyratsi, Powder Technol. 217, 523 (2012).10.1016/j.powtec.2011.11.014 ↗
21. Q. Zhang, X. Su, Y. Yan, H. Xie, T. Liang, Y. You, X. Tang, and C. Uher, ACS Appl. Mater. Interfaces 8, 3268 (2016).10.1021/acsami.5b11063 ↗
22. N. Farahi, M. VanZant, J. Zhao, J. Tse, S. Prabhudev, G. Botton, J. Salvador, F. Borondics, Z. Liu, and H. Kleinke, Dalton Trans. 43, 14983 (2014).10.1039/C4DT01177E ↗
23. P. Zwolenski, J. Tobola, and S. Kaprzyk, J. Electron. Mater. 40, 889 (2011).10.1007/s11664-011-1624-y ↗
24. J. Jung and I. Kim, Electron. Mater. Lett. 6, 187 (2010).10.3365/eml.2010.12.187 ↗
25. J. Tani and H. Kido, Phys. B Condens. Matter. 364, 218 (2005).10.1016/j.physb.2005.04.017 ↗
26. J. Tani and H. Kido, Intermetallics 15, 1202 (2007).10.1016/j.intermet.2007.02.009 ↗
27. R. LaBotz, D. Mason, and D. O’Kane, J. Electrochem. Soc. 110, 127 (1963).10.1149/1.2425689 ↗
28. X. Lin, D. Wang, M. Beekman, and G. Nolas, Mater. Res. Soc. 1044, 155 (2008).
29. T. Dasgupta, C. Stiewe, R. Hassdorf, A.J. Zhou, L. Boettcher, and E. Mueller, Phys. Rev. B 83, 235207 (2011).10.1103/PhysRevB.83.235207 ↗