journal article·2020-12

AZ4620 Photoresist as an Alternative Sacrificial Layer for Surface Micromachining

Ashudeep Minhas, Anuroop Bajpai, Khushbu Mehta, Prem Kumar, Amit Kumar, Deepak Bansal

Journal of Electronic Materials· Volume 49· Issue 12
Publisher page

Abstract

The mechanical actuation of suspended structures in microelectromechanical system (MEMS) switches plays an important role in obtaining an open or short circuit in radio-frequency (RF) transmission lines. These micromachined switches have moving parts which are realized by a sacrificial layer. Several sacrificial materials have been utilized in the fabrication of MEMS structures. The traditional method of using metal such as copper or nickel as a sacrificial layer is difficult due to metal etchant compatibility issues. A photoresist is the best choice for this process. Generally, the HiPR photoresist has been found to be suitable␣for the role of sacrificial layer. However, the HiPR is no longer available in the commercial market. As an alternative to the HiPR, the AZ4620 photoresist can be used. In this paper, a unit process optimization technique is described featuring an AZ4620 photoresist as a sacrificial layer for the microfabrication of a suspended structure. The AZ4620 meets all the requirements for the development of RF MEMS switches. Hence, the recipe and fabrication technique are optimized according to the required thickness. Preliminary measurements of the fabricated switch beam indicate that the required gap has been achieved. This optimized process is compatible with standard MEMS technology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced MEMS and NEMS Technologies · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. G.M. Rebeiz, RF MEMS: theory design and technology (New York: Wiley, 2003), pp. 1–7.10.1002/0471225282 ↗
2. V.K. Varadan, K.J. Vinoy, and K.A. Jose, RF MEMS and their applications (New York: Wiley, 2003), pp. 117–125.
3. D. Bansal, K. Mehta, A. Bajpai, A. Kumar, P. Kumar, and K. Rangra, Trans Electr Electron Mater 20, 113 (2019).10.1007/s42341-018-00093-4 ↗
4. Anuroop, D. Bansal, P. Kumar, A. Kumar, A. Minhas, K. Mehta, M. Kaur, and K. Rangra, Microsyst. Technol. 25, 3129 (2019).10.1007/s00542-019-04343-0 ↗
5. A.Q. Liu, RF MEMS Switches and Integrated Switching Circuits (Berlin: Springer, 2010), pp. 1–7.10.1007/978-0-387-46262-2 ↗
6. D. Bansal, A. Bajpai, K. Mehta, P. Kumar, and A. Kumar, IEEE Trans. Electron Devices 66, 4361 (2019).10.1109/TED.2019.2932846 ↗
7. K. Mehta, D. Bansal, A. Bajpai, A. Minhas, A. Kumar, M. Kaur, P. Kumar, and K. Rangra, J. Micro/Nanolithogr. MEMS MOEMS 17, 045001 (2018).10.1117/1.JMM.17.4.045001 ↗
8. D. Bansal, A. Bajpai, P. Kumar, M. Kaur, A. Chandran, and K. Rangra, J. Micromech. Microeng. 27, 024001 (2018).10.1088/1361-6439/aa4ea1 ↗
9. A.J. Dowling, M.K. Ghantasala, J.P. Hayes, E.C. Harvey, and E.D. Doyle, Smart Mater. Struct. 11, 715 (2002).10.1088/0964-1726/11/5/314 ↗
10. B. Liu, Z. Lu, Z. Li, X. He, and Y. Hao, in IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems (2010), pp.620–623.
11. S.C. Saha, H. Sagberg, E. Poppe, G.U. Jensen, T.A. Fjeldly, and T. Saether, Sens. Actuators, A 143, 452 (2008).10.1016/j.sna.2007.10.067 ↗
12. A. Sharma, D. Bansal, A. Kumar, D. Kumar and K. Rangra, in Proc. SPIE Micromachining and Microfabrication Process Technology XIX (2014) pp. 89730F1-F9.
13. A. Minhas, A. Kumar, D. Bansal, K. Mehta, A. Bajpai, P. Kumar, and K. Rangra, Microsyst. Technol. 25, 2821 (2018).10.1007/s00542-018-4209-3 ↗
14. K.H. Lau, A. Giridhar, S. Harikrishnan, N. Satyanarayana, and S.K. Sinha, Microsyst. Technol. 19, 1863 (2013).10.1007/s00542-013-1740-0 ↗
15. Y.J. Chang, T.Y. Chan, and J.H. Wang, in IEEE 4th International Conference on Bioinformatics and Biomedical Engineering (2010) pp.1-3.
16. R.R. Kunz, in Proc. SPIE Advances in Resist Technology and Processing XXI (2004), pp. 1-15.