Influencing Optical and Magnetic Properties of NiCr2O4 by the Incorporation of Fe(III) for Cr(III) Following Epoxide Gel Synthesis
Source abstract
Abstract
With the objective of modifying the optical and magnetic properties of the spinel NiCr2O4, incorporation of 50 mol.% of Fe3+ for Cr3+ has been attempted following an epoxide-mediated gel synthesis. From the Le Bail refinement of powder x-ray diffraction patterns of xerogels after calcination at 1000°C for 2 h in Fd-3 m space group, the lattice parameter of resultant spinels showed a marginal increase from 8.3117 (21) for NiCr2O4 to 8.3177 (26) A for NiCrFeO4. The square morphology of the crystallites was observed in scanning electron microscopic images, and the energy-dispersive spectroscopy results confirmed the uniform presence of Ni, Cr and Fe in these samples. Lattice fringes in high-resolution transmission electron microscopic images could be related to the cubic spinel structure. The optical band gap was found to decrease from 1.68 for NiCr2O4 to 1.41 eV for NiCrFeO4. Substitution of iron for chromium was found to reduce its catalytic efficiency for photo-degradation of aqueous rhodamine-6G (Rh-6G) dye solution under UV–visible radiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pigment Synthesis and Properties · Magnetic Properties and Synthesis of Ferrites · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. C.N.R. Rao and J. Gopalakrishnan, New Directions in Solid State Chemistry, 2nd ed. (Cambridge: Cambridge University Press, 2010).
2. D.C. UaCearnaigh, R. Baghi, and L.J. Hope-Weeks, RSC Adv. 6, 48212 (2016).10.1039/C6RA05831K ↗
3. V.K. Tripathi and R. Nagarajan, Adv. Powder Technol. 27, 1251 (2016).10.1016/j.apt.2016.04.013 ↗
4. V.K. Tripathi and R. Nagarajan, J. Am. Ceram. Soc. 99, 814 (2016).10.1111/jace.14036 ↗
5. S.S. Manoharan and K.C. Patil, J. Am. Ceram. Soc. 75, 1012 (1992).10.1111/j.1151-2916.1992.tb04177.x ↗
6. M.K. Anupama, N. Srinatha, S. Matteppanavar, B. Angadi, B. Sahoo, and B. Rudraswamy, Ceram. Int. 44, 4946 (2018).10.1016/j.ceramint.2017.12.087 ↗
7. A.V. Anupama, V. Kumaran, and B. Sahoo, Powder Technol. 338, 190 (2018).10.1016/j.powtec.2018.07.008 ↗
8. A.V. Anupama, V. Kumaran, and B. Sahoo, Adv. Powder Technol. 29, 2188–2193 (2018).10.1016/j.apt.2018.06.002 ↗
9. S.K. Date, P.A. Joy, P.S. AnilKumar, B. Sahoo, and W. Keune, Phys. Status Solidi C 1, 3495 (2004).10.1002/pssc.200405489 ↗
10. M. Ptak, M. Maczka, A. Gągor, A. Pikul, L. Macalik, and J. Hanuza, J. Solid State Chem. 201, 270 (2013).10.1016/j.jssc.2013.03.023 ↗
11. E. Grazenaite, J. Pinkas, A. Beganskiene, and A. Kareiva, Ceram. Int. 42, 9402 (2016).10.1016/j.ceramint.2016.02.163 ↗
12. W.J. Tseng, C.K. Hsu, C. Chi, and K.H. Teng, Mater. Lett. 52, 313 (2002).10.1016/S0167-577X(01)00412-8 ↗
13. N.H. Li, Y. Chen, C.Y. Hu, C.H. Hesieh, and S.L. Lo, J. Hazard. Mater. 198, 356 (2011).10.1016/j.jhazmat.2011.10.077 ↗
14. M. Stefanescu, M. Barbu, P. Barvinschi, and O. Stefanescu, J. Therm. Anal. Calorim. 111, 1121 (2013).10.1007/s10973-011-2177-2 ↗
15. R.K. Singh, A. Yadav, A. Narayan, A.K. Singh, L. Verma, and R.K. Verma, J. Therm. Anal. Calorim. 107, 197 (2012).10.1007/s10973-011-1869-y ↗
16. J. Wang, G. Yang, L. Cheng, E.W. Shin, and Y. Men, Catal. Sci. Technol. 5, 4594 (2015).
17. F. Beshkar, S.Z. Ajabshir, and M.S. Niasari, Chem. Eng. J. 279, 605 (2015).10.1016/j.cej.2015.05.076 ↗
18. I. Matulkova, P. Holec, B. Pacakova, S. Kubickova, A. Mantlikova, J. Plocekc, I. Nemec, D. Niznanskya, and J. Vejpravova, Mater. Sci. Eng. B 195, 66 (2015).10.1016/j.mseb.2015.01.011 ↗
19. S.A. Bakar, N. Soltani, W.M.M. Yunus, E. Saion, and A. Bahrami, Solid State Commun. 192, 15 (2014).10.1016/j.ssc.2014.05.002 ↗
20. L.L. Hench and J.K. West, Chem. Rev. 90, 33 (1990).10.1021/cr00099a003 ↗
21. A.E. Gash, T.M. Tillotson, J.H. Satcher Jr, L.W. Hrubesh, and R.L. Simpson, J. Non-Cryst. Solids. 285, 22 (2001).10.1016/S0022-3093(01)00427-6 ↗
22. V.K. Tripathi and R. Nagarajan, Dalton Trans. 45, 11191 (2016).10.1039/C6DT01372D ↗
23. Z. Wang, S.K. Saxena, and P. Lazor, J. Phys. Chem. Solids 64, 425 (2003).10.1016/S0022-3697(02)00328-1 ↗
24. V. Rathod, A.V. Anupama, R. VijayaKumar, V.M. Jali, and B. Sahoo, Vib. Spectrosc. 92, 267 (2017).10.1016/j.vibspec.2017.08.008 ↗
25. I.S. Lyubutin, C.-R. Lin, S.S. Starchikov, A.O. Baskakov, N.E. Gervits, K.O. Funtov, Y.-T. Tseng, W.-J. Lee, K.-Y. Shih, and J.-S. Lee, Inorg. Chem. 56, 12469 (2017).10.1021/acs.inorgchem.7b01935 ↗
26. N.V. Kuleshov, V.G. Shcherbitsky, V.P. Mikhailov, S. Kiick, J. Koetke, K. Petermann, and G. Huberb, J. Lumin. 71, 265 (1997).10.1016/S0022-2313(96)00284-0 ↗
27. H.Z. Qiang, L.X. Quing, H.D. Feng, G. Hong, and L.J. Xiao, Key Eng. Mater. 512, 86 (2012).
28. L. Kumar, P. Kumar, V. Kuncser, S. Greculeasa, B. Sahoo, and M. Kar, Mater. Chem. Phys. 211, 54 (2018).10.1016/j.matchemphys.2018.02.008 ↗
29. J. Barman, T. Bora, and S. Ravi, J. Magn. Magn. Mater. 385, 93 (2015).10.1016/j.jmmm.2015.02.073 ↗
30. J. Barman and S. Ravi, Solid State Commun. 201, 59 (2015).10.1016/j.ssc.2014.10.011 ↗
31. T. Das, B.K. Das, K. Parashar, R. Kumar, H.K. Choudhary, A.V. Anupama, B. Sahoo, P.K. Sahoo, and S.K.S. Parashar, J. Mater. Sci. Mater. Electron. 28, 13587 (2017).10.1007/s10854-017-7198-6 ↗