Microwave Dielectric Properties of BiCu2PO6 Ceramics with Low Sintering Temperature
Source abstract
Abstract
A BiCu2PO6 microwave dielectric ceramic was prepared using a solid-state reaction method. As the sintering temperature increased from 800°C to 880°C, the bulk density of BiCu2PO6 ceramic increased from 6.299 g/cm3 to 6.366 g/cm3; the optimal temperature was 860°C. The best microwave dielectric properties [permittivity (ɛ r ) = ∼16, a quality factor (Q × f) = ∼39,110 GHz and a temperature coefficient of resonant frequency (τ f ) = ∼−59 ppm/°C] were obtained in the ceramic sintered at 860°C for 2 h. Then, TiO2 with a positive τ f (∼+400 ppm/°C) was added to compensate the τ f value. The composite material was found to have a near-zero τ f (+2.7 ppm/°C) and desirable microwave properties (ɛ r = 19.9, Q × f = 24,885 GHz) when synthesized at a sintering temperature of 880°C. This system could potentially be used for low-temperature co-fired ceramics technology applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. M.T. Sebastian, H. Wang, and H. Jantunen, Curr. Opin. Solid State Mater. Sci. 20, 151 (2016).10.1016/j.cossms.2016.02.004 ↗
2. D. Zhou, H. Wang, L.X. Pang, C.A. Randall, and X. Yao, J. Am. Ceram. Soc. 92, 2242 (2009).10.1111/j.1551-2916.2009.03185.x ↗
3. J. Guo, D. Zhou, H. Wang, Y.H. Chen, Y. Zeng, F. Xiang, Y. Wu, and X. Yao, J. Am. Ceram. Soc. 95, 232 (2012).10.1111/j.1551-2916.2011.04760.x ↗
4. J. Guo, D. Zhou, S.L. Zou, H. Wang, L.X. Pang, and X. Yao, J. Am. Ceram. Soc. 97, 1819 (2014).10.1111/jace.12821 ↗
5. Y.Z. Hao, Q.L. Zhang, J. Zhang, C.R. Xin, and H. Yang, J. Mater. Chem. 22, 23885 (2012).10.1039/c2jm33788f ↗
6. S.H. Yoon, D.W. Kim, S.Y. Cho, and K.S. Hong, J. Eur. Ceram. Soc. 23, 2549 (2003).10.1016/S0955-2219(03)00144-4 ↗
7. L.X. Pang, D. Zhou, and W.G. Liu, J. Am. Ceram. Soc. 97, 2032 (2014).10.1111/jace.12996 ↗
8. C. Vaquero, C. Gutierrez-Canas, N. Galarza, and J.L.L. de Lpina, J. Aero. Sci. 102, 1 (2016).10.1016/j.jaerosci.2016.08.011 ↗
9. T. Joseph, M.T. Sebastian, H. Sreemoolanadhan, and V.K.S. Nageswari, Int. J. Appl. Ceram. Tec. 7, E98 (2010).10.1111/j.1744-7402.2009.02439.x ↗
10. T. Takada, S.F. Wang, S. Yoshikawa, S.J. Jang, and R.E. Newnham, J. Am. Ceram. Soc. 77, 1909 (1994).10.1111/j.1151-2916.1994.tb07070.x ↗
11. I.R. Evans, J.S.O. Evans, and J.A.K. Howard, J. Mater. Chem. 12, 2648 (2002).10.1039/b202648a ↗
12. S. Wanga, E. Pomjakushina, T. Shiroka, G. Deng, N. Nikseresht, Ch. Ruegg, H.M. Ronnow, and K. Conder, J. Cryst. Growth 313, 51 (2010).10.1016/j.jcrysgro.2010.09.074 ↗
13. X. Xun, S. Uma, A. Yokochi, and A.W. Sleight, J. Solid State Chem. 167, 245 (2002).10.1006/jssc.2002.9654 ↗
14. S.E. Nunes, C.H. Wang, K. So, J.S.O. Evans, and I.R. Evans, J. Solid State Chem. 222, 12 (2015).10.1016/j.jssc.2014.10.036 ↗
15. I.R. Evans, J.A.K. Howard, and A.W. Sleight, J. Solid. State. Sci. 7, 299 (2005).10.1016/j.solidstatesciences.2004.10.040 ↗
16. F. Abraham, M. Ketatni, G. Mairesse, and B. Mernari, Eur. J. Solid. Inorg. Chem. 31, 313 (1994).
17. K. Momma and F. Izumi, J. Appl. Crystallogr. 44, 1272 (2011).10.1107/S0021889811038970 ↗
18. K.W. Plumb, K. Hwang, Y. Qiu, L.W. Harriger, G.E. Granroth, A.I. Kolesnikov, G.J. Shu, F.C. Chou, C. Ruegg, Y.B. Kim, and Y.J. Kim, Nat. Phys. 12, 224 (2016).10.1038/nphys3566 ↗
19. K.W. Plumb, Z. Yamani, M. Matsuda, G.J. Shu, B. Koteswararao, F.C. Chou, and Y.J. Kim, Phys. Rev. B 88, 024402 (2013).10.1103/PhysRevB.88.024402 ↗
20. R.D. Shannon, Acta. Cryst. 32, 751 (1976).10.1107/S0567739476001551 ↗
21. W. Hume-Rothery, Acta Metall. 14, 17 (1966).10.1016/0001-6160(66)90267-7 ↗
22. M.Z. Hu, H.S. Gu, X.C. Chu, J. Qian, and Z.G. Xia, J. Appl. Phys. 104, 124 (2008).
23. D. Zhou, L.X. Pang, X. Yao, and H. Wang, Mater. Chem. Phys. 115, 126 (2009).10.1016/j.matchemphys.2008.11.035 ↗
24. L.X. Pang, H. Wang, D. Zhou, and X. Yao, J. Alloys Compd. 493, 626 (2010).10.1016/j.jallcom.2009.12.168 ↗