journal article·2015-10

A Simple Sb2Te3 Back-Contact Process for CdTe Solar Cells

B. Siepchen, B. Späth, C. Drost, V. Krishnakumar, C. Kraft, M. Winkler, J. König, K. Bartholomé, S. Peng

Journal of Electronic Materials· Volume 44· Issue 10
Publisher page

Abstract

CdTe solar technology has proved to be a cost-efficient solution for energy production. Formation of the back contact is an important and critical step in preparing high-efficiency, stable CdTe solar cells. In this paper we report a simple CdTe solar cell (Sb2Te3) back contact-formation process. The CdS and CdTe layers were deposited by close-space sublimation. After CdCl2 annealing treatment, the CdTe surface was etched by use of a mixture of nitric and phosphoric acids to obtain a Te-rich surface. Elemental Sb was sputtered on the etched surface and successive post-annealing treatment induced Sb2Te3 alloy formation. Structural characterization by x-ray diffraction analysis confirmed formation of the Sb2Te3 phase. The performance of solar cells with nanoalloyed Sb2Te3 back contacts was comparable with that of reference solar cells prepared with sputtered Sb2Te3 back contact from a compound sputter target.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. C. Corwine, A. Pudov, M. Gloeckler, S. Demtsu, and J. Sites, Sol. Energy Mater. Sol. Cells 82, 481 (2004).
2. D. Bätzner, R. Wendt, A. Romeo, H. Zogg, and A. Tiwari, Thin Solid Films 361, 463 (2000).10.1016/S0040-6090(99)00842-1 ↗
3. M. Winkler, X. Liu, J. König, L. Kirste, H. Böttner, W. Bensch, and L. Kienle, J. Electron. Mater. 41, 1322 (2012).10.1007/s11664-011-1854-z ↗
4. M. Winkler, X. Liu, J.D. Konig, S. Buller, U. Schurmann, L. Kienle, W. Bensch, and H. Bottner, J. Mater. Chem. 22, 11323 (2012).10.1039/c2jm30363a ↗
5. J.D. König, M. Winkler, S. Buller, W. Bensch, U. Schürmann, L. Kienle, and H. Böttner, J. Electron. Mater. 40, 1266 (2011).10.1007/s11664-011-1578-0 ↗
6. A. Bosio, A. Romeo, D. Menossi, S. Mazzamuto, and N. Romeo, Cryst. Res. Technol. 46, 857 (2011).10.1002/crat.201000586 ↗
7. D. Bätzner, A. Romeo, H. Zogg, R. Wendt, and A. Tiwari, Thin Solid Films 387, 151 (2001).10.1016/S0040-6090(01)00792-1 ↗
8. B. Siepchen, C. Drost, B. Späth, V. Krishnakumar, H. Richter, M. Harr, S. Bossert, M. Grimm, K. Häfner, and T. Modes, Thin Solid Films 535, 224 (2013).10.1016/j.tsf.2012.11.083 ↗
9. V. Krishnakumar, A. Barati, H.-J. Schimper, A. Klein, and W. Jaegermann, Thin Solid Films 535, 233 (2013).10.1016/j.tsf.2012.11.085 ↗
10. O. Zywitzki, T. Modes, H. Morgner, C. Metzner, B. Siepchen, B. Späth, C. Drost, V. Krishnakumar, and S. Frauenstein, J.␣Appl. Phys. 114, 163518 (2013).10.1063/1.4827204 ↗
11. A. Niemegeers and M. Burgelman, J. Appl. Phys. 81, 2881 (1997).10.1063/1.363946 ↗
12. X. Wu, J. Keane, R. Dhere, C. DeHart, A. Duda, T. Gessert, S. Asher, D. Levi, and P. Sheldon, Proceedings 17th European Photovoltaic Solar Energy Conference (vol. 995, Munich, 2001).
13. I. Visoly-Fisher, K.D. Dobson, J. Nair, E. Bezalel, G. Hodes, and D. Cahen, Adv. Funct. Mater. 13, 289 (2003).10.1002/adfm.200304259 ↗