A Hybrid Separator with Fast Ionic Conductor for the Application of Lithium-Metal Batteries
Source abstract
Abstract
Uneven lithium deposition and uncontrollable dendrite growth limit the development and progress of lithium-metal batteries (LMBs). Here, we developed an appropriate strategy to prevent the damage of Li dendrites by introducing inorganic oxide solid electrolyte layers (Li1.3Al0.3Ti1.7(PO4)3, LATP) on both sides of a polypropylene separator (PP). The inorganic coating layers, which comprise close-packed LATP solid electrolyte particles, afford a firm and uniform microstructure for the hybrid separator. At a current density (0.25 mA cm−2), the lithium symmetric batteries composed of the LATP/PP separator exhibit a long cycle life of over 1600 h in the 1 M LiTFSI-DOL/DME electrolyte. Furthermore, the LiFePO4||LATP/PP||Li cell presents a prominent performance and delivers an average charge capacity of 151 mAh g−1 at 1 C. This can be attributed to the unique characteristics of the LATP/PP separator, as it not only has outstanding mechanical strength and thermal stability, but also possesses high ionic conductivity, which effectively enhances the rate capacity to improve the safety of LMBs. Graphical Abstract LATP/PP separator is prepared by the coating method, and the Li symmetric batteries can cycle more than 1600 h in the 1 M LiTFSI-DOL/DME, which show an outstanding electrochemical performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. D.H. Kang, M. Chen, and O.A. Ogunseitan, Potential Environmental and Human Health Impacts of Rechargeable Lithium Batteries in Electronic Waste. Environ. Sci. Technol. 47, 5495 (2013).10.1021/es400614y ↗
2. W. Xu, J. Wang, F. Ding, X. Chen, E. Nasybulin, Y. Zhang, and J.-G. Zhang, Lithium Metal Anodes for Rechargeable Batteries. Energy Environ. Sci. 7, 513 (2014).10.1039/C3EE40795K ↗
3. Y. Liu, Y. Qiao, Y. Zhang, Z. Yang, T. Gao, D. Kirsch, B. Liu, J. Song, B. Yang, and L. Hu, 3D Printed Separator for the Thermal Management of High-Performance Li Metal Anodes. Energy Storage Mater. 12, 197 (2018).10.1016/j.ensm.2017.12.019 ↗
4. W. Luo, S. Cheng, M. Wu, X. Zhang, D. Yang, and X. Rui, A Review of Advanced Separators for Rechargeable Batteries. J. Power Sour. 509, 230372 (2021).10.1016/j.jpowsour.2021.230372 ↗
5. W. Lu, Z. Yuan, Y. Zhao, H. Zhang, H. Zhang, and X. Li, Porous Membranes in Secondary Battery Technologies. Chem. Soc. Rev. 46, 2199 (2017).10.1039/C6CS00823B ↗
6. M.F. Lagadec, R. Zahn, and V. Wood, Characterization and Performance Evaluation of Lithium-Ion Battery Separators. Nat. Energy 4, 16 (2018).10.1038/s41560-018-0295-9 ↗
7. S. Li, Z. Luo, L. Li, J. Hu, G. Zou, H. Hou, and X. Ji, Recent Progress on Electrolyte Additives for Stable Lithium Metal Anode. Energy Storage Mater. 32, 306 (2020).10.1016/j.ensm.2020.07.008 ↗
8. G. Wang, X. Xiong, D. Xie, X. Fu, X. Ma, Y. Li, Y. Liu, Z. Lin, C. Yang, and M. Liu, Suppressing Dendrite Growth by a Functional Electrolyte Additive for Robust Li Metal Anodes. Energy Storage Mater. 23, 701 (2019).10.1016/j.ensm.2019.02.026 ↗
9. Y. Ma, Z. Zhou, C. Li, L. Wang, Y. Wang, X. Cheng, P. Zuo, C. Du, H. Huo, Y. Gao, and G. Yin, Enabling Reliable Lithium Metal Batteries by a Bifunctional Anionic Electrolyte Additive. Energy Storage Mater. 11, 197 (2018).10.1016/j.ensm.2017.10.015 ↗
10. S. Sun, S. Myung, G. Kim, D. Lee, H. Son, M. Jang, E. Park, B. Son, Y.-G. Jung, U. Paik, and T. Song, Facile Ex Situ Formation of a LiF–Polymer Composite Layer as an Artificial SEI Layer on Li Metal by Simple Roll-Press Processing for Carbonate Electrolyte-Based Li Metal Batteries. J. Mater. Chem. A 8, 17229 (2020).10.1039/D0TA05372D ↗
11. C. Chen, Q. Liang, G. Wang, D. Liu, and X. Xiong, Grain-Boundary-Rich Artificial SEI Layer for High-Rate Lithium Metal Anodes. Adv. Funct. Mater. 32, 2107249 (2021).10.1002/adfm.202107249 ↗
12. S. Gao, F. Sun, N. Liu, H. Yang, and P.-F. Cao, Ionic Conductive Polymers as Artificial Solid Electrolyte Interphase Films in Li Metal Batteries: A Review. Mater. Today 40, 140 (2020).10.1016/j.mattod.2020.06.011 ↗
13. J. Zhao, G. Zhou, K. Yan, J. Xie, Y. Li, L. Liao, Y. Jin, K. Liu, P.C. Hsu, J. Wang, H.M. Cheng, and Y. Cui, Air-Stable and Freestanding Lithium Alloy/Graphene Foil as an Alternative to Lithium Metal Anodes. Nat. Nanotechnol. 12, 993 (2017).10.1038/nnano.2017.129 ↗
14. D. Lin, Y. Liu, Z. Liang, H.W. Lee, J. Sun, H. Wang, K. Yan, J. Xie, and Y. Cui, Layered Reduced Graphene Oxide with Nanoscale Interlayer Gaps as a Stable Host for Lithium Metal Anodes. Nat. Nanotechnol. 11, 626 (2016).10.1038/nnano.2016.32 ↗
15. H. Wang, D. Lin, Y. Liu, Y. Li, and Y. Cui, Ultrahigh-Current Density Anodes with Interconnected Li Metal Reservoir Through Overlithiation of Mesoporous AlF3 Framework. Sci. Adv. 3, e1701301 (2017).10.1126/sciadv.1701301 ↗
16. Y.-Z. Song, Y. Zhang, J.-J. Yuan, C.-E. Lin, X. Yin, C.-C. Sun, B. Zhu, and L.-P. Zhu, Fast Assemble of Polyphenol Derived Coatings on Polypropylene Separator for High Performance Lithium-Ion Batteries. J. Electroanal. Chem. 808, 252 (2018).10.1016/j.jelechem.2017.12.021 ↗
17. X. Zhu, X. Jiang, X. Ai, H. Yang, and Y. Cao, TiO2 Ceramic-Grafted Polyethylene Separators for Enhanced Thermostability and Electrochemical Performance of Lithium-Ion Batteries. J. Membr. Sci. 504, 97 (2016).10.1016/j.memsci.2015.12.059 ↗
18. D.-W. Lee, S.-H. Lee, Y.-N. Kim, and J.-M. Oh, Preparation of a High-Purity Ultrafine α-Al2O3 Powder and Characterization of an Al2O3-Coated PE Separator for Lithium-Ion Batteries. Powder Technol. 320, 125 (2017).10.1016/j.powtec.2017.07.027 ↗
19. H. Lee, X. Ren, C. Niu, L. Yu, M.H. Engelhard, I. Cho, M.H. Ryou, H.S. Jin, H.T. Kim, J. Liu, W. Xu, and J.G. Zhang, Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator. Adv. Funct. Mater. 27, 1704391 (2017).10.1002/adfm.201704391 ↗
20. Z. Hao, Q. Zhao, J. Tang, Q. Zhang, J. Liu, Y. Jin, and H. Wang, Functional Separators Towards the Suppression of Lithium Dendrites for Rechargeable High-Energy Batteries. Mater. Horiz. 8, 12 (2021).10.1039/D0MH01167C ↗
21. W. Ren, Y. Zheng, Z. Cui, Y. Tao, B. Li, and W. Wang, Recent Progress of Functional Separators in Dendrite Inhibition for Lithium Metal Batteries. Energy Storage Mater. 35, 157 (2021).10.1016/j.ensm.2020.11.019 ↗
22. T. Ma, R. Wang, S. Jin, S. Zheng, L. Li, J. Shi, Y. Cai, J. Liang, and Z. Tao, Functionalized Boron Nitride-Based Modification Layer as Ion Regulator Toward Stable Lithium Anode at High Current Densities. ACS Appl. Mater. Interfaces 13, 391 (2021).10.1021/acsami.0c16354 ↗
23. P. Blin, B. Boury, A. Taguet, J. Touja, L. Monconduit, and S. Patra, Glycerol-Plasticized Agarose Separator Suppressing Dendritic Growth in Li Metal Battery. Carbohydr. Polym. 247, 116697 (2020).10.1016/j.carbpol.2020.116697 ↗
24. Z. Huang, Y. Chen, Q. Han, M. Su, Y. Liu, S. Wang, and H. Wang, Vapor-Induced Phase Inversion of Poly (m-Phenylene Isophthalamide) Modified Polyethylene Separator for High-Performance Lithium-Ion Batteries. Chem. Eng. J. 429, 132429 (2022).10.1016/j.cej.2021.132429 ↗
25. Z. Lu, F. Sui, Y.-E. Miao, G. Liu, C. Li, W. Dong, J. Cui, T. Liu, J. Wu, and C. Yang, Polyimide Separators for Rechargeable Batteries. J. Energy Chem. 58, 170 (2021).10.1016/j.jechem.2020.09.043 ↗
26. Y. Maeyoshi, D. Ding, M. Kubota, H. Ueda, K. Abe, K. Kanamura, and H. Abe, Long-Term Stable Lithium Metal Anode in Highly Concentrated Sulfolane-Based Electrolytes with Ultrafine Porous Polyimide Separator. ACS Appl. Mater. Interfaces. 11, 25833 (2019).10.1021/acsami.9b05257 ↗
27. M.H. Ryou, Y.M. Lee, J.K. Park, and J.W. Choi, Mussel-Inspired Polydopamine-Treated Polyethylene Separators for High-Power Li-Ion Batteries. Adv. Mater. 23, 3066 (2011).10.1002/adma.201100303 ↗
28. S. Hu, S. Lin, Y. Tu, J. Hu, Y. Wu, G. Liu, F. Li, F. Yu, and T. Jiang, Novel Aramid Nanofiber-Coated Polypropylene Separators for Lithium Ion Batteries. J. Mater. Chem. A 4, 3513 (2016).10.1039/C5TA08694A ↗
29. H. Huo, X. Li, Y. Chen, J. Liang, S. Deng, X. Gao, K. Doyle-Davis, R. Li, X. Guo, Y. Shen, C.-W. Nan, and X. Sun, Bifunctional Composite Separator with a Solid-State-Battery Strategy for Dendrite-Free Lithium Metal Batteries. Energy Storage Mater. 29, 361 (2020).10.1016/j.ensm.2019.12.022 ↗
30. S.V. Pershina, Structural, Thermal and Electrical Properties of Li2O–Al2O3–GeO2–P2O5 Glasses. J. Alloys Compd. 871, 159532 (2021).10.1016/j.jallcom.2021.159532 ↗
31. J. Li, W. Tian, H. Yan, L. He, and X. Tuo, Preparation and Performance of Aramid Nanofiber Membrane for Separator of Lithium Ion Battery. J. Appl. Polym. Sci. 133, 43623 (2016).10.1002/app.43623 ↗