Effect of Ni-P Plating Temperature on Growth of Interfacial Intermetallic Compound in Electroless Nickel Immersion Gold/Sn-Ag-Cu Solder Joints
Source abstract
Abstract
The growth of interfacial intermetallic compound and the brittle fracture behavior of Sn-3.0Ag-0.5-Cu solder (SAC305) joints on electroless nickel immersion gold (ENIG) surface finish have been investigated using Ni-P plating solution at temperatures from 75°C to 85°C and fixed pH of 4.5. SAC305 solder balls with diameter of 450 μm were mounted on the prepared ENIG-finished Cu pads and reflowed with peak temperature of 250°C. The interfacial intermetallic compound (IMC) thickness after reflow decreased with increasing Ni-P plating temperature. After 800 h of thermal aging, the IMC thickness of the sample prepared at 85°C was higher than for that prepared at 75°C. Scanning electron microscopy of the Ni-P surface after removal of the Au layer revealed a nodular structure on the Ni-P surface. The nodule size of the Ni-P decreased with increasing Ni-P plating temperature. The Cu content near the IMC layer increased to 0.6 wt.%, higher than the original Cu content of 0.5 wt.%, indicating that Cu diffused from the Cu pad to the solder ball through the Ni-P layer at a rate depending on the nodule size. The sample prepared at 75°C with thicker interfacial IMC showed greater high-speed shear strength than the sample prepared at 85°C. Brittle fracture increased with decreasing Ni-P plating temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrodeposition and Electroless Coatings · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. R. Aschenbrenner, A. Ostmann, U. Beutler, J. Simon, and H. Reichl, IEEE Trans. Compon. Packag. Manuf. Technol. B 18, 334 (1995).10.1109/96.386270 ↗
2. G.O. Mallory and J.B. Hajdu, Electroless Plating: Fundamentals and Applications (New York: William Andrew, 1990).
3. Z. Kejun, V. Vuorinen, and J.K. Kivilahti, IEEE Trans. Electron. Packag. Manuf. 25, 162 (2002).10.1109/TEPM.2002.801648 ↗
4. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗
5. Y.-C. Lin, K.-J. Wang, and J.-G. Duh, J. Electron. Mater. 39, 283 (2009).10.1007/s11664-009-1014-x ↗
6. C. Ho, Y. Lin, and C. Kao, Chem. Mater. 14, 949 (2002).10.1021/cm010639h ↗
7. M. Alam, Y. Chan, and K. Tu, Chem. Mater. 15, 4340 (2003).10.1021/cm034692c ↗
8. K. Zeng and K.-N. Tu, Mater. Sci. Eng. R 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
9. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng. R 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
10. J.-W. Yoon, J.-H. Park, C.-C. Shur, and S.-B. Jung, Microelectron. Eng. 84, 2552 (2007).10.1016/j.mee.2007.05.057 ↗
11. M. Alam, Y. Chan, and K. Tu, J. Appl. Phys. 94, 4108 (2003).10.1063/1.1602563 ↗
12. Y.M. Chow, W.M. Lau, and Z.S. Karim, Surf. Interface Anal. 31, 321 (2001).10.1002/sia.980 ↗
13. J. Yu and J. Kim, Acta Mater. 56, 5514 (2008).10.1016/j.actamat.2008.07.022 ↗
14. Y. Liu, J. Wang, L. Yin, P. Kondos, C. Parks, P. Borgesen, D. Henderson, E. Cotts, and N. Dimitrov, J. Appl. Electrochem. 38, 1695 (2008).10.1007/s10800-008-9618-z ↗
15. L. Yin, F. Wafula, N. Dimitrov, and P. Borgesen, J. Electron. Mater. 41, 302 (2012).10.1007/s11664-011-1764-0 ↗
16. S. Kim and J. Yu, Mater. Lett. 106, 75 (2013).10.1016/j.matlet.2013.05.019 ↗
17. S.-H. Kim and J. Yu, J. Mater. Res. 25, 1854 (2010).10.1557/JMR.2010.0232 ↗
18. W. Seo, K.-H. Kim, J.-H. Bang, M.-S. Kim, and S. Yoo, J. Electron. Mater. 43, 4457 (2014).10.1007/s11664-014-3395-8 ↗
19. T.-K. Tsai and C.-G. Chao, Appl. Surf. Sci. 233, 180 (2004).10.1016/j.apsusc.2004.03.014 ↗
20. I. Baskaran, T.S. Narayanan, and A. Stephen, Mater. Chem. Phys. 99, 117 (2006).10.1016/j.matchemphys.2005.10.001 ↗
21. T. Hentschel, D. Isheim, R. Kirchheim, F. Müller, and H. Kreye, Acta Mater. 48, 933 (2000).10.1016/S1359-6454(99)00371-7 ↗
22. S.C. Mehta, D.A. Smith, and U. Erb, Mater. Sci. Eng. A 204, 227 (1995).10.1016/0921-5093(95)09966-2 ↗
23. R. Street and C. Tsai, Philos. Mag. B 57, 663 (1988).10.1080/13642818808211236 ↗
24. Y.-C. Sohn and J. Yu, J. Mater. Res. 20, 1931 (2005).10.1557/JMR.2005.0246 ↗
25. Y. Tian, J. Chow, X. Liu, Y.P. Wu, and S.K. Sitaraman, J. Electron. Mater. 42, 230 (2013).10.1007/s11664-012-2302-4 ↗
26. J.-W. Yoon, H.-S. Chun, H.-B. Kang, M.-H. Park, C.-W. Yang, M.-H. Park, C.-W. Yang, H.-J. Lee, and S.-B. Jung, Surf. Rev. Lett. 14, 827 (2007).10.1142/S0218625X07010111 ↗
27. X.-C. Wang, W.-B. Cai, W.-J. Wang, H.-T. Liu, and Z.-Z. Yu, Surf. Coat. Technol. 168, 300 (2003).10.1016/S0257-8972(03)00013-6 ↗
28. Y.M. Chow, W.M. Lau, and Z.S. Karim, Surf. Interface Anal. 31, 321 (2001).10.1002/sia.980 ↗