Reaction characteristics of the In-15Pb-5Ag solder with a Au/Ni/Cu pad and their effects on mechanical properties
Source abstract
Abstract
Reaction characteristics of the In-15Pb-5Ag (wt.%) solder with a Au/Ni/Cu pad during reflow soldering and aging treatment were examined. Interfacial reaction during reflow resulted in either an AuIn2 or Ni28In72 layer, depending on reflow time. The AuIn2 layer became thinner and disappeared from the interface, and only the Ni28In72 layer grew with the progress of aging treatment at 130°C. Based on those observations, the dissolution rate of the Au top layer was estimated, and the behavior of the AuIn2 layer during reflow and aging treatment was discussed. In addition, peak shear load and fracture energy of the solder bump were measured as a function of reflow time and aging treatment. The results were compared with those measured with the Sn-37Pb solder bump.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M. Pecht, Integrated Circuit, Hybrid, and Multichip Module Package Design Guidelines: A Focus on Reliability (New York: John Wiley & Sons, Inc., 1994), pp. 183–224.
2. T.-Y. Pan, H.D. Blair, J.M. Nicholson, and S.-W. Oh, Advances in Electronic Packaging, ed. E. Suhir, M. Shiraton, and Y.C. Lee (New York: ASME, 1997), pp. 1347–1355.
3. Z. Mei, M. Kaufmaan, A. Eslambolchi, and P. Johnson, Proc. 48th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1998), pp. 952–961.
4. A. Zribi, R.R. Chromik, R. Presthus, J. Clum, K. Teed, L. Zavalij, J. De Vita, J. Tova, and E.J. Cotts, Proc. 49th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1999), pp. 451–457.
5. S.C. Hung, P.J. Zheng, S.C. Lee, and J.J. Lee, IEEE/CPMT Int. Electronic Manufacturing Technology Symp. (Piscataway, NJ: IEEE, 1999), pp. 7–15.
6. R. Erich, R.J. Coyle, G.M. Wenger, and A. Primavera, IEEE/CPMT Int. Electronic Manufacturing Technology Symp. (Piscataway, NJ: IEEE, 1999), pp. 16–22.
7. J.H. Lee, J.-H. Park, D.-H. Shin, Y.-H. Lee, and Y.-S. Kim, J. Electron. Mater. 30, 1138 (2001).10.1007/s11664-001-0141-9 ↗
8. A.M. Minor and J.W. Morris, Jr., Metall. Trans. A 31A, 798 (2000).10.1007/s11661-000-0022-5 ↗
9. A. Zribi et al., IEEE Trans. Comp. Packaging Technol. 23, 383 (2000).10.1109/6144.846778 ↗
10. A.M. Minor and J.W. Morris, Jr., J. Electron. Mater. 29, 1170 (2000).10.1007/s11664-000-0009-4 ↗
11. C.E. Ho, R. Zheng, G.L. Luo, A.H. Lin, and C.R. Kao, J. Electron. Mater. 29, 1175 (2000).10.1007/s11664-000-0010-y ↗
12. H.G. Song, J.P. Ahn, A.M. Minor, and J.W. Morris, Jr., J. Electron. Mater. 30, 409 (2001).10.1007/s11664-001-0052-9 ↗
13. T.S. Laverghetta, Microwave Materials and Fabrication Techniques, 3rd ed. (Dedham, MA: Artech House Inc., 2000), pp. 116–126.
14. K. Uenishi, T. Saeki, Y. Kohara, K.F. Kobayashi, I. Shoji, M. Nishiura, and M. Yamamoto, Mater. Trans. 42, 756 (2001).10.2320/matertrans.42.756 ↗
15. K.J. Puttlitz, IEEE Trans. Comp. Hybrid Manufacturing Technol. 13, 647 (1990).10.1109/33.62574 ↗
16. C.E. Ho, Y.M. Chen, and C.R. Kao, J. Electron. Mater. 28, 1231 (1999).10.1007/s11664-999-0162-3 ↗
17. W.K. Choi and H.M. Lee, J. Electron. Mater. 29, 1207 (2000).10.1007/s11664-000-0014-7 ↗
18. H. Okamoto and T.B. Massalski, Binary Phase Diagrams, ed. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak (Materials Park, OH: ASM International, 1990), p. 382.
19. J.-H. Lee, D.-J. Park, J.-N. Heo, Y.-H. Lee, D.-H. Shin, and Y.-S. Kim, Scripta Mater. 42, 827 (2000).10.1016/S1359-6462(99)00392-9 ↗
20. Y. Cubota, K. Kifune, and K. Yamamoto, Thin Solid Films 286, 136 (1996).10.1016/S0040-6090(95)08512-2 ↗
21. Technical information from Indium Corporation of America, Utica, NY.
22. C.-Y. Huang and S.-W. Chen, J. Electron. Mater. 31, 152 (2002).10.1007/s11664-002-0162-z ↗