Mitigation of Long Whisker Growth Based upon the Dynamic Recrystallization Mechanism
Source abstract
Abstract
The role of an Fe layer under a Sn layer to mitigate long whisker formation by the Fe/Sn interface through modification of the driving force for dynamic recrystallization (DRX) has been studied using a laboratory test vehicle with a Si (wafer) base material and evaporated layers of Cr (adhesion layer), Fe, and Sn. The latter two layers had thickness combinations of 10 nm Fe/0.5 μm Sn and 40 nm Fe/2.0 μm Sn. Aging was carried out for 9 days at temperature of 25°C, 60°C, and 100°C under stress conditions. Applied loads of 0 g or 500 g compression did not affect the results. Industrial test vehicles including electroplated layers of Sn and Fe (0.5 μm to 2.0 μm) were subjected to the same aging treatments. The absence of long whiskers and hillocks from the laboratory test vehicles indicated that the Fe/Sn interface altered the driving force of DRX rather than altering grain boundary mobility. The presence of depleted zones confirmed that the Fe layer did not affect the long-range diffusion. The industrial test samples showed that the Fe/Sn interface prevented the formation of long whiskers on the electroplated Sn films for similar aging conditions. The Fe layer provided a suitable barrier against Cu diffusion into the Sn layer. Copper in the Sn layer, even when only in solid solution, enhanced the DRX driving force for whisker growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. P. Vianco and J. Rejent, J. Electron. Mater. 38, 1815 (2009).10.1007/s11664-009-0879-z ↗
2. P. Vianco and J. Rejent, J. Electron. Mater. 38, 1826 (2009).10.1007/s11664-009-0882-4 ↗
3. P. Vianco, M. Neilsen, J. Rejent, and R. Grant, J. Electron. Mater. 44, 4012 (2015).10.1007/s11664-015-3779-4 ↗
4. D.-K. Kim, W. Nix, R. Vinci, M. Deal, and J. Plummer, J. Appl. Phys. 90, 781 (2001).10.1063/1.1381045 ↗
5. I. Petrov, P. Barna, L. Hultman, and J. Greene, J. Vac. Sci. Technol. A 21, s117 (2003).10.1116/1.1601610 ↗
6. F. d’Huerle, Thin Solid Films 12, 399 (1972).10.1016/0040-6090(72)90103-4 ↗
7. P. Chaudhari, J. Vac. Sci. Technol. 9, 520 (1972).10.1116/1.1316674 ↗
8. F. Genin, J. Appl. Phys. 77, 5130 (1995).10.1063/1.359324 ↗
9. W. Nix, Metall. Trans. A 20A, 2217 (1989).10.1007/BF02666659 ↗
10. C. Thompson, Annu. Rev. Mater. Sci. 20, 245 (1990).10.1146/annurev.ms.20.080190.001333 ↗
11. C. Thompson and R. Carel, J. Mech. Phys. Solids 44, 657 (1996).10.1016/0022-5096(96)00022-1 ↗
12. U. Smith, J. Vac. Sci. Technol. 9, 2527 (1991).10.1116/1.577268 ↗
13. Y. Hou and C.M. Tan, Semicond. Sci. Technol. (2008). https://doi.org/10.1088/0268-1242/23/7/075023.10.1088/0268-1242/23/7/075023 ↗
14. F. d’Heurle, Int. Mater. Rev. 34, 53 (1989).10.1179/imr.1989.34.1.53 ↗
15. J. Nielsen and T. Woodrow, Final Report: SERDP Project WP-1751 (Strategic Research and Development Program, Alexandria, 2013)
16. R. Kawanaka, K. Fujiwara, S. Nango, and T. Hasegawa, Jpn. J. Appl. Phys. 22, 917 (1983).10.1143/JJAP.22.917 ↗
17. C. Chang and R. Vook, Thin Solid Films 228, 205 (1993).10.1016/0040-6090(93)90599-K ↗
18. J. Smetana, IEEE Trans. Comput. Packag. Manuf. Technol. 30, 11 (2007).
19. P. Jagtap, A. Chakraborty, P. Eisenlohr, and P. Kumar, Acta Mater. 134, 346 (2017).10.1016/j.actamat.2017.05.063 ↗
20. A. Etienne, E. Cadel, A. Lina, L. Cretinon, and P. Pareige, IEEE Trans. Comput. Packag. Manuf. Technol. 2, 1928 (2012).10.1109/TCPMT.2012.2203134 ↗
21. P. Jagtap, V. Sethuraman, and P. Kumar, J. Electron. Mater. 47, 5229 (2018).10.1007/s11664-018-6391-6 ↗
22. E. Chason and F. Pei, J. Met. 67, 2416 (2015).
23. Linear Thermal Expansion Coefficient for Metals (2018). https://www.amesweb.info/Materias/Linear-Thermal-Expansion-Coefficient-Metals.aspx
24. T. Massalski, J. Murray, L. Bennett, and H. Baker (eds.), Binary Alloy Phase Diagrams (ASM International, Materials Park, OH, 1986) p. 944
25. T. Massalski, J. Murray, L. Bennett, and H. Baker (eds.), Binary Alloy Phase Diagrams (ASM International, Materials Park, OH, 1986), p. 1861
26. G. Pantazopoulos and A. Vazdirvanidis, Microscopy and Analysis, p. 13 (2008)
27. J. Wilson, Philos. Mag. 27, 1467 (1973).10.1080/14786437308226901 ↗
28. J. Cheng, P. Vianco, and J. Li, J. Appl. Phys. (2010). https://doi.org/10.1063/1.3419837.10.1063/1.3419837 ↗
29. P. Vianco and M. Neilsen, Office of Scientific and Technical Information, 1427292 (U.S. Government, Washington, DC, 2015)
30. Y. Zhang, C. Xu, J. Abys, and A. Vysotskaya, Report to the IPC SMEMA Council (IPC, Bannockburn, IL, 2002)
31. Y. Wang, D. Ding, T. Liu, K.-P. Galuschki, Y. Hu, A. Gong, Ming Shen, H. Sun, X. Wang, J. Sun, M. Li, and D. Mao, in Proceedings of the 11th International Conference on Electronic Packaging Technology and High Density Package, pp. 980–983 (2010)
32. M. Osterman, in Report to the CALCE EPSC Working Group (CALCE, University of Maryland, 2002)
33. P. Vianco and J. Rejent, Low Thermal Expansion Alloys and Composites, ed. J. Stephens and D. Frear (Warrendale: TMS, 1992), p. 147.
34. G. Panzeri, A. Accogli, E. Gibertini, C. Rinaldi, L. Nobili, and L. Magagnin, Electrochim. Acta 271, 576 (2018).10.1016/j.electacta.2018.03.174 ↗