journal article·2022-02

Solution-Processed Copper Oxide Thin Film as Efficient Hole Transport Layer for Organic Solar Cells

Vishwas D. Patel, Rajdeep Dhar, Navdeep Gandhi, S. R. Meher, Dhritiman Gupta

Journal of Electronic Materials· Volume 51· Issue 2
Publisher page

Abstract

A simple and cost-effective sol–gel-based spin-coating method for Cu-O film is reported. The solution-processed film has been investigated for its viability as a hole transport layer (HTL) and alternative to poly(3,4-ethylenedioxythiophene) (PEDOT):polystyrene sulfonate (PSS) whose hygroscopic nature affects device stability. Cu-O thin films were obtained by spin-coating precursor solution onto indium tin oxide (ITO) substrates followed by thermal annealing in air at 300 °C to convert the precursor to oxide form. x-Ray photoelectron spectroscopy (XPS) elemental analysis revealed the presence of both types of phase, namely CuO and Cu2O, at the surface of the film. These films are amorphous in nature, as is evident from their ultraviolet–visible (UV–Vis) absorption spectrum with a considerable amount of subbandgap absorption in the low energy regime. The solar cell performance and Schottky junction properties of devices fabricated using amorphous Cu-O HTL and PEDOT:PSS-HTL were compared and found to be equivalent. Both the PEDOT-PSS reference device and the Cu-O device suffered from poor fill factor originating from surface states present at the Al/polymer interface. The Cu-O/polymer interface does not introduce an additional barrier to charge collection and works as efficiently as the PEDOT:PSS/polymer interface. Solution-processable Cu-O films can thus be used as an alternative to PEDOT:PSS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Z. Xiao, X. Jia, and L. Ding, Ternary organic solar cells offer 14% power conversion efficiency. Sci. Bull. 62, 1562 (2017).10.1016/j.scib.2017.11.003 ↗
2. J. Hou, O. Inganäs, R.H. Friend, and F. Gao, Organic solar cells based on non-fullerene acceptors. Nat. Mater. 17, 119 (2018).10.1038/nmat5063 ↗
3. L. Meng, Y. Zhang, X. Wan, C. Li, X. Zhang, Y. Wang, X. Ke, Z. Xiao, L. Ding, R. Xia, H.L. Yip, Y. Cao, and Y. Chen, Organic and solution-processed tandem solar cells with 17.3% efficiency. Science 361, 1094 (2018).10.1126/science.aat2612 ↗
4. D. Gupta, M.M. Wienk, and R.A.J. Janssen, Efficient polymer solar cells on opaque substrates with a laminated PEDOT:PSS top electrode. Adv. Energy Mater. 3, 782 (2013).10.1002/aenm.201201061 ↗
5. K. Kawano, R. Pacios, D. Poplavskyy, J. Nelson, D.D.C. Bradley, and J.R. Durrant, Degradation of organic solar cells due to air exposure. Sol. Energy Mater. Sol. Cells. 90, 3520 (2006).10.1016/j.solmat.2006.06.041 ↗
6. M.P. De Jong, L.J. Van Ijzendoorn, and M.J.A. De Voigt, Stability of the Interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes. Appl. Phys. Lett. 77, 2255 (2000).10.1063/1.1315344 ↗
7. D. Gupta, T.G.J. Van Der Hofstad, R.A.J. Janssen, and S.C.J. Meskers, Evidence for Exciton Quenching by Hole Polarons in Thick P3HT:PCBM Solar Cells, 2016 3rd Int. Conf. Emerg. Electron. ICEE 2016 (2017).10.1109/ICEmElec.2016.8074601 ↗
8. D. Ouyang, Z. Huang, and W.C.H. Choy, Solution-processed metal oxide nanocrystals as carrier transport layers in organic and perovskite solar cells. Adv. Funct. Mater. 29, 1 (2019).
9. M.D. Irwin, D.B. Buchholz, A.W. Hains, R.P.H. Chang, and T.J. Marks, P-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells. Proc. Natl. Acad. Sci. 105, 2783 (2008).10.1073/pnas.0711990105 ↗
10. S.J. Lee, Y. Jang, H.J. Kim, E.S. Hwang, S.M. Jeon, J.S. Kim, T. Moon, K.-T. Jang, Y.-C. Joo, D.-Y. Cho, and C.S. Hwang, Composition, microstructure, and electrical performance of sputtered SnO thin films for p-type oxide semiconductor. ACS Appl. Mater. Interfaces 10, 3810 (2018).10.1021/acsami.7b17906 ↗
11. V. Shrotriya, G. Li, Y. Yao, C.-W. Chu, and Y. Yang, Transition metal oxides as the buffer layer for polymer photovoltaic cells. Appl. Phys. Lett. 88, 073508 (2006).10.1063/1.2174093 ↗
12. Y. Peng, N. Yaacobi-Gross, A.K. Perumal, H.A. Faber, G. Vourlias, P.A. Patsalas, D.D.C. Bradley, Z. He, and T.D. Anthopoulos, Efficient organic solar cells using copper(I) iodide (CuI) hole transport layers. Appl. Phys. Lett. 106, 243302 (2015).10.1063/1.4922758 ↗
13. R. Bhargav, N. Chaudhary, S. Rathi, D. Shahjad, S. Bhardwaj, and A.P. Gupta, Copper bromide as an efficient solution-processable hole transport layer for organic solar cells: effect of solvents. ACS Omega 4, 60 (2019).10.1021/acsomega.8b03038 ↗
14. N. Yaacobi-Gross, N.D. Treat, P. Pattanasattayavong, H. Faber, A.K. Perumal, N. Stingelin, D.D.C. Bradley, P.N. Stavrinou, M. Heeney, and T.D. Anthopoulos, High-efficiency organic photovoltaic cells based on the solution-processable hole transporting interlayer copper thiocyanate (CuSCN) as a replacement for PEDOT:PSS. Adv. Energy Mater. 5, 1401529 (2015).10.1002/aenm.201401529 ↗
15. B.S. Li, K. Akimoto, and A. Shen, Growth of Cu2O thin films with high hole mobility by introducing a low-temperature buffer layer. J. Cryst. Growth. 311, 1102 (2009).10.1016/j.jcrysgro.2008.11.038 ↗
16. D.S. Murali, S. Kumar, R.J. Choudhary, A.D. Wadikar, M.K. Jain, and A. Subrahmanyam, Synthesis of Cu2O from CuO thin films: optical and electrical properties. AIP Adv. 5, 047143 (2015).10.1063/1.4919323 ↗
17. Z. Wang, P.K. Nayak, J.A. Caraveo-Frescas, and H.N. Alshareef, Recent developments in P-type oxide semiconductor materials and devices. Adv. Mater. 28, 3831 (2016).10.1002/adma.201503080 ↗
18. D.O. Scanlon, B.J. Morgan, and G.W. Watson, Acceptor levels in p-type Cu2O: rationalizing theory and experiment. Phys. Rev. Lett. 103, 096405 (2009).10.1103/PhysRevLett.103.096405 ↗
19. Y. Guo, H. Lei, L. Xiong, B. Li, Z. Chen, J. Wen, G. Yang, G. Li, and G. Fang, Single phase, high hole mobility Cu2O films as an efficient and robust hole transporting layer for organic solar cells. J. Mater. Chem. A. 5, 11055 (2017).10.1039/C7TA01628J ↗
20. B.K. Meyer, A. Polity, D. Reppin, M. Becker, P. Hering, P.J. Klar, Th. Sander, C. Reindl, J. Benz, M. Eickhoff, C. Heiliger, M. Heinemann, J. Bläsing, A. Krost, S. Shokovets, C. Müller, and C. Ronning, Binary copper oxide semiconductors: From materials towards devices. Phys. Status Solidi B. 249, 1487 (2012).10.1002/pssb.201248128 ↗
21. C. Zuo and L. Ding, Solution-processed Cu2O and CuO as hole transport materials for efficient perovskite solar cells. Small 11, 5528 (2015).10.1002/smll.201501330 ↗
22. S. Chatterjee and A.J. Pal, Introducing Cu2O thin films as a hole-transport layer in efficient planar perovskite solar cell structures. J. Phys. Chem. C. 120, 1428 (2016).10.1021/acs.jpcc.5b11540 ↗
23. Z. Lin, D. Han, and S. Li, Study on thermal decomposition of copper (II) acetate monohydrate in air. J. Therm. Anal. Calorim. 107, 471–475 (2012).10.1007/s10973-011-1454-4 ↗
24. J.F. Moulder, W.F. Stickle, P.E. Sobol, and K.D. Bomben, Handbook of X-ray photoelectron spectroscopy (Perkin-Elmer Corporation, Minnesota, 1992).
25. P. Jiang, D. Prendergast, F. Borondics, S. Porsgaard, L. Giovanetti, E. Pach, J. Newberg, H. Bluhm, F. Besenbacher, and M. Salmeron, Experimental and theoretical investigation of the electronic structure of Cu2O and CuO thin films on Cu(110) using x-ray photoelectron and absorption spectroscopy. J. Chem. Phys. 138, 024704 (2013).10.1063/1.4773583 ↗
26. S.M. Sze and K.K. Ng, Physics of Semiconductor Devices, 3rd ed., (Wiley, Hoboken, 2007).
27. S.K. Cheung, and N.W. Cheung, Extraction of Schottky diode parameters from forward current-voltage characteristics. Appl. Phys. Lett. 49, 85 (1986).10.1063/1.97359 ↗
28. E.H. Rhoderick and R.H. Williams, Metal-Semiconductor Contacts, 2nd ed., (Clarendon Press, Oxford, 1988).
29. J.C. Nolasco, G. Ramos-Ortiz, J.L. Maldonado, O. Barbosa-Garcia, B. Ecker, and E. von Hauff, Polymer/cathode interface barrier limiting the open circuit voltage in polymer:fullerene organic bulk heterojunction solar cells: a quantitative analysis. Appl. Phys. Lett. 104, 043308 (2014).10.1063/1.4863755 ↗
30. U. Wurfel, D. Neher, A. Spies, and S. Albrecht, Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells. Nat. Commun. 6, 6951 (2015).10.1038/ncomms7951 ↗
31. T. Kirchartz, F. Deledalle, P.S. Tuladhar, J.R. Durrant, and J. Nelson, On the differences between dark and light ideality factor in polymer: fullerene solar cells. J. Phys. Chem. Lett. 4, 2371 (2013).10.1021/jz4012146 ↗
32. A. Wagenpfahl, D. Rauh, M. Binder, C. Deibel, and V. Dyakonov, S-shaped current-voltage characteristics of organic solar devices. Phys. Rev. B. 82, 115306 (2010).10.1103/PhysRevB.82.115306 ↗
33. http://web.stanford.edu/group/mcgehee/transfermatrix/index.html
34. D. Gupta, M. Bag, and K.S. Narayan, Correlating reduced fill factor in polymer solar cells to contact effects. Appl. Phys. Lett. 92, 093301 (2008).10.1063/1.2841062 ↗