Dielectric Properties of PMMA Films Reinforced with Ag/rGO Hybrid Composites
Source abstract
Abstract
Nanocomposite materials consisting of polymer matrices and nano-sized fillers have fascinated scientists with their superior functional properties, attained at relatively low filler loading. In this work, nanocomposite films of poly(methyl methacrylate) (PMMA)-reinforced with different concentrations of partially reduced graphene oxide/silver (rGO/Ag) hybrid were prepared in two different solvents following an ex situ chemical method. By employing solvent casting, all the samples were prepared as free-standing films. The structural and morphological characterisations of a GO/Ag hybrid and the as-prepared film samples were done with different tools such as x-ray diffraction (XRD), UV–Vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and electron microscopy (SEM and TEM). Chemical microanalysis of the nanohybrid was carried out by energy-dispersive x-ray (EDX) spectroscopy. Dielectric properties of these films have been carried out at room temperature in the frequency range of 100 Hz–2 MHz using an LCR meter, and these films show considerable changes in their properties when loaded with GO/Ag hybrid nanocomposites. The filler and solvent-dependent properties shown by the free-standing films make them a promising candidate for the fabrication of flexible energy storage devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. B. Sannakki and Anita, Phys. Procedia 49, 15 (2013).10.1016/j.phpro.2013.10.006 ↗
2. B.S. Shim, J. Starkovich, and N. Kotov, Compos. Sci. Technol. 66, 1174 (2006).10.1016/j.compscitech.2005.11.004 ↗
3. R.M. Bagwell, J.M. McManaman, and R.C. Wetherhold, Compos. Sci. Technol. 66, 522 (2006).10.1016/j.compscitech.2005.06.005 ↗
4. T.K. Chen, Y.I. Tien, and K.H. Wei, Polymer (Guildf) 41, 1345 (2000).10.1016/S0032-3861(99)00280-3 ↗
5. M. Bhattacharya, Materials (Basel) 9, 1 (2016).10.3390/ma9040262 ↗
6. P.B. Messersmith and E.P. Giannelis, J. Polym. Sci., Part A: Polym. Chem. 33, 1047 (1995).10.1002/pola.1995.080330707 ↗
7. E. Alsharaeh, Materials (Basel) 9, 458 (2016).10.3390/ma9060458 ↗
8. H.K. Choudhary, R. Kumar, S.P. Pawar, S. Bose, and B. Sahoo, J. Electron. Mater. 49, 1618 (2020).10.1007/s11664-019-07478-y ↗
9. D. Yang, H. Xu, W. Yu, J. Wang, and X. Gong, J. Mater. Sci.: Mater. Electron. 28, 13006 (2017).
10. T. Ramanathan, A.A. Abdala, S. Stankovich, D.A. Dikin, M. Herrera-Alonso, R.D. Piner, D.H. Adamson, H.C. Schniepp, X. Chen, R.S. Ruoff, S.T. Nguyen, I.A. Aksay, R.K. Prud’Homme, and L.C. Brinson, Nat. Nanotechnol. 3, 327 (2008).10.1038/nnano.2008.96 ↗
11. H.K. Choudhary, R. Kumar, S.P. Pawar, U. Sundararaj, and B. Sahoo, Phys. Chem. Chem. Phys. 21, 15595 (2019).10.1039/C9CP03305J ↗
12. L.N. Ismail, N.N.H.N. Mohamad, M.S. Shamsudin, H. Zulkefle, M.H. Abdullah, S.H. Herman, and M. Rusop, Jpn. J. Appl. Phys. 51, 06FG09 (2012).10.7567/JJAP.51.06FG09 ↗
13. S. Altarazi, R. Allaf, and F. Alhindawi, Materials (Basel) 12, 1475 (2019).10.3390/ma12091475 ↗
14. U. Siemann, Prog. Colloid Polym. Sci. 130, 1 (2005).
15. M.A. Herrera, J.A. Sirviö, A.P. Mathew, and K. Oksman, Mater. Des. 93, 19 (2016).10.1016/j.matdes.2015.12.127 ↗
16. U. Ali, K.J.B.A. Karim, and N.A. Buang, Polym. Rev. 55, 678 (2015).10.1080/15583724.2015.1031377 ↗
17. W.S. Hummers, R.E. Offeman, and O.R. Hummers, J. Am. Chem. Soc. 6, 1339 (1958).10.1021/ja01539a017 ↗
18. S. Rao, D. Liu, P. Jaiswal, S. Ray, and D. Bhattacharyya, Adv. Mater. Res. 410, 26 (2012).10.4028/www.scientific.net/AMR.410.26 ↗
19. L. Stobinski, B. Lesiak, A. Malolepszy, M. Mazurkiewicz, B. Mierzwa, J. Zemek, P. Jiricek, and I. Bieloshapka, J. Electron. Spectros. Relat. Phenom. 195, 145 (2014).10.1016/j.elspec.2014.07.003 ↗
20. M.R. Das, R.K. Sarma, R. Saikia, V.S. Kale, M.V. Shelke, and P. Sengupta, Colloids Surf. B Biointerfaces 83, 16 (2011).10.1016/j.colsurfb.2010.10.033 ↗
21. W. Shao, X. Liu, H. Min, G. Dong, Q. Feng, S. Zuo, and A.C.S. Appl, Mater. Interfaces 7, 6966 (2015).10.1021/acsami.5b00937 ↗
22. Q. Lai, S. Zhu, X. Luo, M. Zou, and S. Huang, AIP Adv. 2, 1 (2012).
23. P.P.A. Jose, M.S. Kala, N. Kalarikkal, and S. Thomas, Res. Chem. Intermed. 44, 5597 (2018).10.1007/s11164-018-3443-8 ↗
24. L. Fu, G. Lai, B. Jia, and A. Yu, Electrocatalysis 6, 72 (2014).10.1007/s12678-014-0219-9 ↗
25. D.A. Dinh, K.S. Hui, K.N. Hui, Y.R. Cho, W. Zhou, X. Hong, and H.H. Chun, Appl. Surf. Sci. 298, 62 (2014).10.1016/j.apsusc.2014.01.101 ↗
26. S. Gurunathan, J.W. Han, and J.H. Kim, Colloids Surf. B Biointerfaces 111, 376 (2013).10.1016/j.colsurfb.2013.06.018 ↗
27. L. Shahhriary and A.A. Athawale, Int. J. Renew. Energy Environ. Eng. 02, 58 (2014).
28. E.Y. Choi, T.H. Han, J. Hong, J.E. Kim, S.H. Lee, H.W. Kim, and S.O. Kim, J. Mater. Chem. 20, 1907 (2010).10.1039/b919074k ↗
29. T.T. Baby and S. Ramaprabhu, J. Mater. Chem. 21, 9702 (2011).10.1039/c0jm04106h ↗
30. S. Gurunathan, J. Woong, H. Jung, P.E. Kim, Y.-J. Choi, D.-N. Kwon, and J.-H. Kim, Int. J. Nanomed. 10, 6257 (2015).10.2147/IJN.S92449 ↗
31. Y. Guo, X. Sun, Y. Liu, W. Wang, H. Qiu, and J. Gao, Carbon N. Y. 50, 2513 (2012).10.1016/j.carbon.2012.01.074 ↗
32. G. Khurana, N. Kumar, S. Kooriyattil, and R.S. Katiyar, J. Appl. Phys. 117, 1 (2015).10.1063/1.4908146 ↗
33. V.H. Nguyen, B.K. Kim, Y.L. Jo, and J.J. Shim, J. Supercrit. Fluids 72, 28 (2012).10.1016/j.supflu.2012.08.005 ↗
34. C. Pardanaud, G. Cartry, L. Lajaunie, and R. Arenal, J. Carbon Res. 5, 79 (2019).10.3390/c5040079 ↗
35. S. Stankovich, D.A. Dikin, R.D. Piner, K.A. Kohlhaas, A. Kleinhammes, Y. Jia, Y. Wu, S.T. Nguyen, and R.S. Ruoff, Carbon N. Y. 45, 1558 (2007).10.1016/j.carbon.2007.02.034 ↗
36. S.-J. Qiao, X.-N. Xu, Y. Qiu, H.-C. Xiao, and Y.-F. Zhu, Nanomaterials 6, 1 (2016).
37. S. Sajjad, S.A. Khan Leghari, A. Iqbal, and A.C.S. Appl, Mater. Interfaces 9, 43393 (2017).10.1021/acsami.7b08232 ↗
38. M.A.J. Al-Saadi and M. Tagreed, Int. J. Adv. Res. Sci. Eng. Technol. 10, 902 (2015).
39. V.S. Puli, M. Ejaz, R. Elupula, M. Kothakonda, S. Adireddy, R.S. Katiyar, S.M. Grayson, and D.B. Chrisey, Polymer (Guildf) 105, 35 (2016).10.1016/j.polymer.2016.10.020 ↗
40. T.E. Motaung, A.S. Luyt, M.L. Saladino, D.C. Martino, and E. Caponetti, Express Polym. Lett. 6, 871 (2012).10.3144/expresspolymlett.2012.93 ↗
41. S. Ahmad, S. Ahmad, and S.A. Agnihotry, Bull. Mater. Sci. 30, 31 (2007).10.1007/s12034-007-0006-9 ↗
42. K. Choo, Y.C. Ching, C.H. Chuah, S. Julai, and N.S. Liou, Materials (Basel) 9, 1 (2016).10.3390/ma9080644 ↗
43. A. Khan, R.A. Khan, S. Salmieri, C. Le Tien, B. Riedl, J. Bouchard, G. Chauve, V. Tan, M.R. Kamal, and M. Lacroix, Carbohydr. Polym. 90, 1601 (2012).10.1016/j.carbpol.2012.07.037 ↗
44. H.K. Choudhary, S.P. Pawar, R. Kumar, A.V. Anupama, S. Bose, and B. Sahoo, ChemistrySelect 2, 830 (2017).10.1002/slct.201601895 ↗
45. H.K. Choudhary, R. Kumar, S.P. Pawar, A.V. Anupama, S. Bose, and B. Sahoo, ChemistrySelect 3, 2120 (2018).10.1002/slct.201702698 ↗
46. K.S. Kumar, S. Pittala, S. Sanyadanam, and P. Paik, RSC Adv. 5, 14768 (2015).10.1039/C4RA10800K ↗
47. S. Moharana and R.N. Mahaling, Chem. Phys. Lett. 680, 31 (2017).10.1016/j.cplett.2017.05.018 ↗
48. S. Ishaq, F. Kanwal, S. Atiq, M. Moussa, U. Azhar, M. Imran, and D. Losic, Materials (Basel) 11, 1 (2018).10.3390/ma11091553 ↗
49. M. Devendrappa, S.M. Ambalagi, S. Nagaraja, and B. Sannakki, in AIP Conference. Proceedings. (2018), p. 020010.
50. C. Li, S. Yu, S. Luo, W. Yang, Z. Ge, H. Huang, R. Sun, and C.P. Wong, RSC Adv. 6, 36450 (2016).10.1039/C6RA03469A ↗
51. S. Wageh, L. He, A.A. Al-Ghamdi, Y.A. Al-Turki, and S.C. Tjong, RSC Adv. 4, 28426 (2014).10.1039/C4RA03624G ↗
52. Y.J. Wan, P.L. Zhu, S.H. Yu, W.H. Yang, R. Sun, C.P. Wong, and W.H. Liao, Compos. Sci. Technol. 141, 48 (2017).10.1016/j.compscitech.2017.01.010 ↗
53. K.B. Bhavitha, A.K. Nair, H. Mariya, J. Jose, A. Mayeen, M.S. Kala, A. Saha, S. Thomas, O.S. Oluwafemi, and N. Kalarikkal, New J. Chem. 42, 15750 (2018).10.1039/C8NJ02684J ↗
54. J. Wang, J. Hu, Q. Sun, K. Zhu, B.W. Li, and J. Qiu, AIP Adv. 7, 2017 (2017).
55. P. Maji, P.P. Pande, and R.B. Choudhary, Bull. Mater. Sci. 38, 417 (2015).10.1007/s12034-015-0886-z ↗
56. M. Haneef, H. Saleem, and A. Habib, Synth. Met. 223, 101 (2017).10.1016/j.synthmet.2016.12.006 ↗
57. Y. Li, Y. Shi, F. Cai, J. Xue, F. Chen, and Q. Fu, Compos. Part A Appl. Sci. Manuf. 78, 318 (2015).10.1016/j.compositesa.2015.08.031 ↗
58. Z.M. Dang, J.K. Yuan, J.W. Zha, T. Zhou, S.T. Li, and G.H. Hu, Prog. Mater Sci. 57, 660 (2012).10.1016/j.pmatsci.2011.08.001 ↗
59. T. Tippo, C. Thanachayanont, P. Muthitamongkol, C. Junin, M. Hietschold, and A. Thanachayanont, Thin Solid Films 546, 180 (2013).10.1016/j.tsf.2013.05.022 ↗
60. S. Bistac and J. Schultz, Prog. Org. Coat. 31, 347 (1997).10.1016/S0300-9440(97)00093-3 ↗
61. L.M. Clayton, A.K. Sikder, A. Kumar, M. Cinke, M. Meyyappan, T.G. Gerasimov, and J.P. Harmon, Adv. Funct. Mater. 15, 101 (2005).10.1002/adfm.200305106 ↗
62. S. Bistac and J. Schultz, Int. J. Adhes. Adhes. 17, 197 (1997).10.1016/S0143-7496(97)00001-8 ↗
63. L. Wannatong, A. Sirivat, and P. Supaphol, Polym. Int. 53, 1851 (2004).10.1002/pi.1599 ↗
64. H.K. Choudhary, S.P. Pawar, S. Bose, and B. Sahoo, in AIP Conference. Proceedings. (2018), p. 120061.