journal article·2018-04

Microstructural Evolution and Mechanical Behavior of High Temperature Solders: Effects of High Temperature Aging

M. Hasnine, B. Tolla, N. Vahora

Journal of Electronic Materials· Volume 47· Issue 4
Publisher page

Abstract

This paper explores the effects of aging on the mechanical behavior, microstructure evolution and IMC formation on different surface finishes of two high temperature solders, Sn-5 wt.% Ag and Sn-5 wt.% Sb. High temperature aging showed significant degradation of Sn-5 wt.% Ag solder hardness (34%) while aging has little effect on Sn-5 wt.% Sb solder. Sn-5 wt.% Ag experienced rapid grain growth as well as the coarsening of particles during aging. Sn-5 wt.% Sb showed a stable microstructure due to solid solution strengthening and the stable nature of SnSb precipitates. The increase of intermetallic compound (IMC) thickness during aging follows a parabolic relationship with time. Regression analysis (time exponent, n) indicated that IMC growth kinetics is controlled by a diffusion mechanism. The results have important implications in the selection of high temperature solders used in high temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. F.W. Gayle, G. Becka, A. Syed, J. Badgett, G. Whitten, T.Y. Pan, A. Grusd, B. Bauer, R. Lathrop, J. Slattery, and I. Anderson, JOM 53, 17 (2001).10.1007/s11837-001-0097-5 ↗
2. H. Schoeller, S. Bansal, A. Knobloch, D. Shaddock, and J. Cho, J. Electron. Mater. 38, 802 (2009).10.1007/s11664-009-0767-6 ↗
3. M.M. El-Bahay, M.E. El Mossalamy, M. Mahdy, and A.A. Bahgat, Phys. Status Solidi A 198, 76 (2003).10.1002/pssa.200306592 ↗
4. E.K. Ohriner, Weld. J., 66, 191 (1987).
5. L. Snugovsky, D.D. Perovic, and J.W. Rutter, Mater. Sci. Technol. 20, 1049 (2004).10.1179/026708304225019902 ↗
6. H. Ma, J.C. Suhling, Y. Zhang, P. Lall, and M.J. Bozack, Electronic Components and Technology Conference, pp. 653–668 (2007).10.1109/ECTC.2007.373867 ↗
7. S.L. Allen, M.R. Notis, R.R. Chromik, and R.P. Vinci, J. Mater. Res. 19, 1417 (2004).10.1557/JMR.2004.0190 ↗
8. S. Wiese and K.J. Wolter, Microelectron. Reliab. 47, 223 (2007).10.1016/j.microrel.2006.09.006 ↗
9. M. Yang, M. Li, and C. Wang, Intermetallic 25, 86 (2012).10.1016/j.intermet.2012.02.023 ↗
10. W. Peng, E. Monlevade, and M.E. Marques, Microelectron. Reliab. 47, 2161 (2007).10.1016/j.microrel.2006.12.006 ↗
11. J.W. Yoon and S.B. Jung, J. Mater. Sci. 39, 4211 (2004).10.1023/B:JMSC.0000033401.38785.73 ↗
12. P.T. Vianco, K.L. Erickson, and P.L. Hopkins, J. Electron. Mater. 23, 721 (1994).10.1007/BF02651365 ↗
13. M. Hasnine, M. Mustafa, J.C. Suhling, B.C. Prorok, M.J. Bozack, and P. Lall, Electronic Components and Technology Conference, pp. 166–178 (2013).10.1109/ECTC.2013.6575568 ↗
14. M. Hasnine, J.C. Suhling, B.C. Prorok, M.J. Bozack, and P. Lall, Electronic Components and Technology Conference, pp. 379–394 (2014).10.1109/ECTC.2014.6897315 ↗
15. M. Hasnine, J.C. Suhling, and M.J. Bozack, J. Mater. Sci. Mater. Electron. 28, 1 (2017).
16. E.O. Hall, Proc. Phys. Soc. Sect. B 64, 747 (1951).10.1088/0370-1301/64/9/303 ↗
17. H. Chen, J. Han, and M. Li, J. Electron. Mater. 40, 2470 (2011).10.1007/s11664-011-1782-y ↗
18. R. Sedláček, W. Blum, J. Kratochvil, and S. Forest, Metall. Mater. Trans. A 33, 319 (2002).10.1007/s11661-002-0093-6 ↗