journal article·2016-11

Mechanical and Electrical Properties of Aluminum/Epoxy Nanocomposites

Lina Dong, Wenying Zhou, Xuezhen Sui, Zijun Wang, Huiwu Cai, Peng Wu, Yating Zhang, Anning Zhou

Journal of Electronic Materials· Volume 45· Issue 11
Publisher page

Abstract

Surface-modified self-passivated aluminum (Al) nanoparticles were used for reinforcing epoxy (EP) resin, and the curing behavior, mechanical and electrical properties of the Al/EP nanocomposites were investigated. The incorporation of Al nanoparticles into EP significantly decreases the cure reaction enthalpy of the nancomposites, and the apparent activation energy of Al/EP systems is 64.96 kJ/mol. The coefficient of thermal expansion of the nanocomposites decreases with increasing the Al loading due to the strong interaction between the Al and the EP matrix. The storage modulus of the nanocomposites increases continuously with Al content, whereas, the glass transition temperature declines slightly. With increasing the Al content, the tensile modulus, flexural modulus and compressive modulus of the nanocomposites increase continuously compared with the neat one. The mechanical properties are improved by Al nanoparticles at low Al contents. The best overall dielectric and electrical performance are achieved about at 1 wt.% of Al concentration. The enhanced dielectric breakdown strength is mainly related to the insulating alumina shell on the surface of core Al and the strong interfacial interactions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · High voltage insulation and dielectric phenomena · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. R. Bagheri, B.T. Marouf, and R.A. Pearson, Polym. Rev. 49, 201 (2009).10.1080/15583720903048227 ↗
2. R. Thomas, A. Boudenne, L. Ibos, Y. Candau, and S. Thomas, J. Appl. Polym. Sci. 116, 3232 (2010).10.1002/app.31741 ↗
3. J. Kong, Y. Tang, X. Zhang, and J. Gu, Polym. Bull. 60, 229 (2008).10.1007/s00289-007-0862-x ↗
4. V.D. Ramos, H.M. Costa, V.L.P. Soares, and R.S.V. Nascimento, Polym. Test. 24, 387 (2005).10.1016/j.polymertesting.2004.09.010 ↗
5. E. Bozkurt, E. Kaya, and M. Tanoglu, Compos. Sci. Technol. 67, 3394 (2007).10.1016/j.compscitech.2007.03.021 ↗
6. W. Zhao, Y. Tang, J. Xi, and J. Kong, Appl. Surf. Sci. 326, 276 (2015).10.1016/j.apsusc.2014.11.069 ↗
7. G. Tripathi and D. Srivastava, Mater. Sci. Eng., A 496, 483 (2008).10.1016/j.msea.2008.06.035 ↗
8. K. Liu, S. Lu, S. Li, B. Huang, and C. Wei, Iran. Polym. J. 21, 497 (2012).10.1007/s13726-012-0054-x ↗
9. G. Tripathi and D. Srivastava, J. Appl. Polym. Sci. 114, 2769 (2009).10.1002/app.30669 ↗
10. R. Thomas, S. Durix, C. Sinturel, T. Omonov, S. Goossens, G. Groeninckx, P. Moldenaers, and S. Thomas, Polymer 48, 1695 (2007).10.1016/j.polymer.2007.01.018 ↗
11. X.R. Shan, C.J. Huang, H.H. Yang, Z.X. Wu, J.W. Li, R.J. Huang, and L.F. Li, Phys. Procedia 67, 1056 (2015).10.1016/j.phpro.2015.06.200 ↗
12. L. Meng, X. Zhang, Y. Tang, K. Su, and J. Kong, Sci. Rep. 5, 7910 (2015).10.1038/srep07910 ↗
13. F.J. Wang, W. Li, M.S. Xue, J.P. Yao, and J.S. Lu, Compos. Part B. 42, 87 (2011).10.1016/j.compositesb.2010.08.006 ↗
14. W.Y. Zhou and D.M. Yu, J. Appl. Polym. Sci. 118, 3156 (2010).10.1002/app.32442 ↗
15. S.H. Yang, T.P. Nguyen, P.L. Rendu, and C.S. Hsu, Compos. A Appl. Sci. Manuf. 36, 509 (2005).10.1016/j.compositesa.2004.10.008 ↗
16. H. Chen, J. Kong, W. Tian, and X.D. Fan, Macromolecules 45, 6185 (2012).10.1021/ma300686b ↗
17. D.K. Shukla, S.V. Kasisomayajula, and V. Parameswaran, Compos. Sci. Technol. 68, 3055 (2008).10.1016/j.compscitech.2008.06.025 ↗
18. T. Imai, F. Sawa, T. Ozaki, T. Shimizu, S. Kuge, M. Kozako, and T. Tanaka, IEEJ Trans. Fundam. Mater. 126, 84 (2006).10.1541/ieejfms.126.84 ↗
19. W.Y. Zhou, S.H. Qi, and C.C. Tu, J. Appl. Polym. Sci. 104, 2478 (2007).10.1002/app.25479 ↗
20. W.Y. Zhou, J. Mater. Sci. 46, 3883 (2011).10.1007/s10853-011-5309-y ↗
21. H. Chen and J. Kong, J. Phys. Chem. B 118, 3441 (2014).10.1021/jp411888p ↗
22. A. Yasmin, J.J. Luo, J.L. Abot, and I.M. Daniel, Compos. Sci. Technol. 66, 2415 (2006).10.1016/j.compscitech.2006.03.011 ↗
23. N. Tagami, M. Hyuga, Y. Ohki, T. Tanaka, T. Imai, M. Harada, and M. Ochi, IEEE Trans. Dielectr. Electr. Insul. 17, 214 (2010).10.1109/TDEI.2010.5412020 ↗
24. C.H. Chen, J.Y. Jian, and F.S. Yen, Compos. Part A 40, 463 (2009).10.1016/j.compositesa.2009.01.010 ↗
25. G.X. Hou, N. Li, H.Z. Han, L. Huo, and J.G. Gao, Iran. Polym. J. 24, 299 (2015).10.1007/s13726-015-0321-8 ↗
26. J. Kong, T. Schmalz, G. Motz, and A.H.E. Müller, Macromolecules 44, 1280 (2011).10.1021/ma1029086 ↗
27. D. Rosu, A. Mititelu, and C.N. Cascaval, Polym. Test. 23, 209 (2004).10.1016/S0142-9418(03)00082-5 ↗
28. W. Liu, Q. Qiu, J. Wang, Z. Huo, and H. Sun, Polymer 49, 4399 (2008).10.1016/j.polymer.2008.08.004 ↗
29. S. Vyazovkin and N. Sbirrazzuoli, J. Phy. Chem. B 107, 882 (2003).10.1021/jp026592k ↗
30. S.K. Sahoo, S. Mohanty, and S.K. Nayak, Prog. Org. Coat. 88, 263 (2015).10.1016/j.porgcoat.2015.07.012 ↗
31. J. Kong, R. Ning, and Y. Tang, J. Mater. Sci. 41, 1639 (2006).10.1007/s10853-005-1862-6 ↗
32. M. Ghaffari, R. Naderi, and M. Ehsani, Iran. Polym. J. 23, 559 (2014).10.1007/s13726-014-0250-y ↗
33. L.N. Dong, W.Y. Zhou, X.Z. Sui, Z.J. Wang, H.W. Cai, P. Wu, J. Zuo, and X.R. Liu, J. Electron. Mater. 45, 3776 (2016).10.1007/s11664-016-4495-4 ↗
34. W. Jiang, F.L. Jin, and S.J. Park, J. Ind. Eng. Chem. 18, 594 (2012).10.1016/j.jiec.2011.11.140 ↗
35. I.J. Kim, W.S. Kim, D.H. Lee, W. Kim, and J.W. Bae, J. Appl. Polym. Sci. 117, 1535 (2010).10.1002/app.31996 ↗
36. P. Dittanet and R.A. Pearson, Polymer 53, 1890 (2012).10.1016/j.polymer.2012.02.052 ↗
37. N. Chikhi, S. Fellahi, and M. Bakar, Eur. Polym. J. 38, 251 (2012).10.1016/S0014-3057(01)00194-X ↗
38. Q. Wang and G. Chen, IEEE Trans. Dielectr. Electr. Insul. 21, 1809 (2014).10.1109/TDEI.2014.004278 ↗
39. Z. Zhai, L.J. Feng, Z. Liu, S.S. Zhou, H. Lou, and G.Z. Li, Prog. Org. Coat. 87, 106 (2015).10.1016/j.porgcoat.2015.05.018 ↗
40. D. Pinto, L. Bernardo, A. Amaro, and S. Lopes, Constr. Build. Mater. 95, 506 (2015).10.1016/j.conbuildmat.2015.07.124 ↗
41. W.Y. Peng, X.Y. Huang, J.H. Yu, P.K. Jiang, and W.H. Liu, Compos. Part A 41, 1201 (2010).10.1016/j.compositesa.2010.05.002 ↗
42. W.Y. Zhou and D.M. Yu, J. Mater. Sci. 48, 7960 (2013).10.1007/s10853-013-7606-0 ↗
43. W.Y. Zhou and D. Yu, J. Appl. Polym. Sci. 112, 1695 (2009).10.1002/app.29602 ↗
44. X.F. Wu, Y. Wang, L.Y. Xie, J.H. Yu, F. Liu, and P.K. Jiang, Iran. Polym. J. 22, 61 (2013).10.1007/s13726-012-0104-4 ↗
45. A. Guevaramorales and A.C. Taylor, J. Mater. Sci. 49, 1574 (2014).10.1007/s10853-013-7840-5 ↗
46. J.W. Xu and C.P. Wong, Compos. Part A 38, 13 (2007).10.1016/j.compositesa.2006.02.002 ↗