Mechanical Properties of Lead-Free Solder Joints Under High-Speed Shear Impact Loading
Source abstract
Abstract
In this study we expanded on recently reported research by using a modified miniature Charpy impact-testing system to investigate the shear deformation behavior of Sn–3.0Ag–0.5Cu lead-free solder joints at high strain rates ranging from 1.1 × 103 s−1 to 5.5 × 103 s−1. The experimental results revealed that the maximum shear strength of the solder joint decreased with increasing load speed in the ranges tested in this study. For solder joints tested at a shear speed exceeding 1 m/s, corresponding to an approximate strain rate that exceeds 1950 s−1, the brittle fracture mode is the main failure mode, whereas lower strain rates result in a ductile-to-brittle transition in the fracture surfaces of solder joints. In addition, the mode II stress intensity factor (K II) used to evaluate the fracture toughness (K C) of an interfacial intermetallic compound layer between Sn–3.0Ag–0.5Cu solder and the toughness of copper substrate was found to decrease from 1.63 MPa m0.5 to 0.97 MPa m0.5 in the speed range tested here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electronic Packaging and Soldering Technologies · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K.N. Tu, Solder Joint Technology (Berlin: Springer, 2007).
2. A.N Tong, Q.I.N Fei, and J. Li, Int. Conf. Electro. Pack. Technol. High Density Pack. pp. 375–378 (2009).
3. M. Date, T. Shoji, M. Fujiyoshi, K. Sato, and K.N. Tu, Scr. Mater. 51, 641 (2004).10.1016/j.scriptamat.2004.06.027 ↗
4. I.D. You and H.K. Kim, Mater. Sci. Eng., A 556, 551 (2012).10.1016/j.msea.2012.07.025 ↗
5. S.M. Joo and H.K. Kim, Mater. Sci. Eng. A528, 2711 (2011).
6. J.H Kuang, C.M Hsu, and W.C Chiu, Electro. Pack. Technol. Conf. 910–913 (2007).10.1109/EPTC.2007.4469770 ↗
7. W. Li, M.B Zhou, H.B Qin, X. Ma, and X.P Zhang, Int. Conf. Electro. Pack. Technol. High Density Pack. (2012), pp. 749–754.
8. B. Roggeman, U.M Tino, and D. Barbini, SMTA Int. Conf. Proc. 403–408 (2009).
9. F. Song, R Lee, K. Newman, B. Sykes, and S. Clark, Proc. Electro. Compon. Technol. Conf. 364–372 (2007).10.1109/ECTC.2007.373824 ↗
10. D.S. Liu, C.Y. Kuo, C.L. Hsu, and C.L. Chung, Exp. Tech. 34, 68 (2010).10.1111/j.1747-1567.2009.00606.x ↗
11. Y.A. Su, L.B. Tan, T.Y. Tee, and V.B.C. Tan, Microelectron. Reliab. 50, 564 (2010).10.1016/j.microrel.2010.01.043 ↗
12. K.E. Yazzie, H.X. Xie, J.J. Williams, and N. Chawla, Scr. Mater. 66, 586 (2012).10.1016/j.scriptamat.2012.01.009 ↗
13. M.O. Alam, H. Lu, Chris Bailey, and Y.C. Chan, Comput. Mater. Sci. 45, 576 (2009).10.1016/j.commatsci.2008.12.001 ↗
14. R. Darveaux and C. Reichman, Electro. Pack. Technol. Conf. 283–289 (2006).10.1109/EPTC.2006.342730 ↗
15. T.L Anderson, Fracture Mechanics, 3rd edn. (2005).10.1201/9781420058215 ↗
16. M.R. Ayatollahi and M.R.M. Aliha, Int. J. Solids Struct. 43, 5217 (2006).10.1016/j.ijsolstr.2005.07.049 ↗
17. Z. Huang, P. Kumar, I. Dutta, J.H.L. Pang, R. Sidhu, M. Renavikar, and R. Mahajan, J. Electron. Mater. 41, 375 (2012).10.1007/s11664-011-1769-8 ↗
18. H. Nayeb-Hashemi and P. Yang, Int. J. Fatigue 23, S325 (2001).10.1016/S0142-1123(01)00144-X ↗
19. S.P.V. Nadimplli and J.K. Spelt, Eng. Fract. Mech. 78, 317 (2011).10.1016/j.engfracmech.2010.09.011 ↗
20. J. Weertman, Acta Metall. 26, 1731 (1978).10.1016/0001-6160(78)90084-6 ↗
21. K.W. Lo, T. Tamilselvan, K.H. Chua, and M.M. Zhao, Eng. Fract. Mech. 54, 189 (1996).10.1016/0013-7944(95)00174-3 ↗
22. B.D. Agarwal and G.S. Giare, Eng. Fract. Mech. 15, 219 (1981).10.1016/0013-7944(81)90119-3 ↗
23. A.B. de Morais, Eng. Fract. Mech. 74, 739 (2007).10.1016/j.engfracmech.2006.06.017 ↗
24. P. Kumar, Z. Huang, I. Dutta, R. Sidhu, M. Renavikar, and R. Mahajan, J. Electron. Mater. 41, 412 (2012).10.1007/s11664-011-1806-7 ↗
25. S.M. Hayes, N. Chawla, and D.R. Frear, Microelectron. Reliab. 49, 269 (2009).10.1016/j.microrel.2008.11.004 ↗
26. H. Fei, K. Yazzie, N. Chawla, and H. Jiang, J. Electron. Mater. 41, 2089 (2012).10.1007/s11664-012-2079-5 ↗