In Situ Synchrotron Characterization of Melting, Dissolution, and Resolidification in Lead-Free Solders
Source abstract
Abstract
Melting and solidification of SAC 305 lead-free solder joints in a wafer-level chip-scale package were examined in situ with synchrotron x-ray diffraction. The chips with balls attached (but not assembled to a circuit board) were reflowed one to three times using a temperature and time history similar to an industrial reflow process. Diffraction patterns from the same joint were collected every 0.5 s during the melting and solidification process. The solidification of the Sn phase in the solder joint occurred between 0.5 s and 1 s. During melting, most of the Sn melted in about 0.5 s, but in some cases took 2–5 s for the Sn peak to completely disappear. In one instance, the Sn peak persisted for 30 s. The Ag3Sn peaks dissolved in about 1–2 s, but the Cu6Sn5 peaks from the interface were persistent and did not change throughout the melting and solidification process. Completely different Sn crystal orientations were always developed upon resolidification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. D.W. Henderson, T. Gosselin, A. Sarkhel, S.K. Kang, W.-K. Choi, D.-Y. Shih, C. Goldsmith, and K.J. Puttlitz, J. Mater. Res. 17, 2775 (2002).10.1557/JMR.2002.0402 ↗
2. R. Kinyanjui, L.P. Lehman, L. Zavalij, and E. Cotts, J. Mater. Res. 20, 2914 (2005).10.1557/JMR.2005.0361 ↗
3. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, E.J. Cotts, and B. Nandagopal, IEEE Trans. Compon. Packag. Technol. 31, 370 (2008).10.1109/TCAPT.2008.916835 ↗
4. D.W. Henderson, J.J. Woods, T.A. Gosselin, J. Bartelo, D.E. King, T.M. Korhonen, M.A. Korhonen, L.P. Lehman, E.J. Cotts, S.K. Kang, P. Lauro, D.-Y. Shih, C. Goldsmith, and K.J. Puttlitz, J. Mater. Res. 19, 1608 (2004).10.1557/JMR.2004.0222 ↗
5. S. Park, R. Dhakal, L. Lehman, and E. Cotts, Acta Mater. 55, 3253 (2007).10.1016/j.actamat.2007.01.028 ↗
6. T.R. Bieler, B. Zhou, L. Blair, A. Zamiri, P. Darbandi, F. Pourboghrat, T.-K Lee, and K.-C. Liu, J. Electron. Mater. (submitted).
7. A.U. Telang, T.R. Bieler, and M.A. Crimp, Mater. Sci. Eng. A 421, 22 (2006).10.1016/j.msea.2005.10.009 ↗
8. J.O. Suh, K.N. Tu, and N. Tamura, J. Appl. Phys. 102, 063511 (2007).10.1063/1.2776002 ↗
9. G.J. Jackson, H. Lu, R. Durairaj, N. Hoo, C. Bailey, N.N. Ekere, and J. Wright, J. Electron. Mater. 33, 1524 (2004).10.1007/s11664-004-0094-x ↗
10. K.-J. Wang, Y.-C. Lin, J.-G. Duh, C.-Y. Cheng, and J.-J. Lee, J. Mater. Res. 25, 972 (2010).10.1557/JMR.2010.0130 ↗
11. J.W. Elmer, E.D. Specht, and M. Kumar, J. Electron. Mater. 39, 273 (2010).10.1007/s11664-010-1080-0 ↗
12. A. Pietrikova, J. Bednarcik, and J. Durisin, J. Alloys Compd. 509, 1550 (2011).10.1016/j.jallcom.2010.09.153 ↗
13. T.R. Bieler, T.-K. Lee, and K.-C. Liu, J. Electron. Mater. 38, 2712 (2009).10.1007/s11664-009-0919-8 ↗
14. R.S. Sidhu, S.V. Madge, X. Deng, and N. Chawla, J. Electron. Mater. 36, 12 (2007).10.1007/s11664-007-0239-9 ↗
15. G. Wu and S. Zaefferer, Ultramicroscopy 109, 1317 (2009).10.1016/j.ultramic.2009.06.002 ↗
16. L.P. Lehman, Y. Xing, T.R. Bieler, and E.J. Cotts, Acta Mater. 58, 3546 (2010).10.1016/j.actamat.2010.01.030 ↗
17. S.-K. Seo, S.K. Kang, M.G. Cho, D.-Y. Shih, and H.M. Lee, J. Electron. Mater. 38, 2242 (2009).10.1007/s11664-009-0867-3 ↗
18. H.F. Zou, H.J. Yang, and Z.F. Zhang, Acta Mater. 56, 2649 (2008).10.1016/j.actamat.2008.01.055 ↗
19. I.E. Anderson, J.W. Walleser, J.L. Harringa, F. Laabs, and A. Kracher, J. Electron. Mater. 38, 2770 (2009).10.1007/s11664-009-0936-7 ↗
20. Y.-W. Yen, W.-T. Chou, Y. Tseng, C. Lee, and C.-L. Hsu, J. Electron. Mater. 37, 73 (2008).10.1007/s11664-007-0266-6 ↗
21. T.-K. Lee, B. Liu, B. Zhou, T.R. Bieler, and K.-C. Liu, J. Electron. Mater. 40, 1895 (2011).10.1007/s11664-011-1654-5 ↗