Effect of Ni, Zn, Au, Sb and In on the Suppression of the Cu3Sn Phase in Sn-10 wt.%Cu Alloys
Source abstract
Abstract
Since manufacturing is transitioning into Pb-free solder development for electronic assembly and packaging, consumer demands for more compact electronics have increased the importance of reliability issues brought about by the increased density of circuitry. Therefore, the role of alloying elements that can be added to common Pb-free solders such as Sn-Cu or Sn-Ag-Cu alloys in enhancing the properties and performance of the solder becomes important. Microstructural analysis along with direct observation in situ synchrotron radiography were used to study the effect of Ni, Zn, Au, In and Sb on the development of phases in Sn-10 wt.%Cu (Sn-10Cu). It was found that adding Ni and Zn to a Sn-10Cu alloy had the greatest impact on the microstructure with the CuSn phase completely absent after these additions were made. Additions of Au and In also resulted in a reduction in the amount of CuSn; however, the effect was not as pronounced. Removing the CuSn phase from Sn-Cu Pb-free solder alloys is a possible approach for the design of more desirable microstructures that translate to better performance in modern electronic packaging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. C. Gourlay and B. Arfaei, JOM 71, 131 (2019).10.1007/s11837-018-3267-4 ↗
2. K.N. Reeve, J.R. Holaday, S.M. Choquette, I.E. Anderson, and C.A. Handwerker, J. Phase Equilib. 37, 369 (2016).10.1007/s11669-016-0476-9 ↗
3. M. Fazal, N. Liyana, S. Rubaiee, and A. Anas, Meas. 134, 897 (2019).10.1016/j.measurement.2018.12.051 ↗
4. S. Cheng, C.-M. Huang, and M. Pecht, Microelec. Rel. 75, 77 (2017).10.1016/j.microrel.2017.06.016 ↗
5. W.R. Osório, L.C. Peixoto, L.R. Garcia, N. Mangelinck-Noël, and A. Garcia, J. Alloys Compd. 572, 97 (2013).10.1016/j.jallcom.2013.03.234 ↗
6. S. Chen, W. Zhou, and P. Wu, J. Electron. Mater. 44, 3920 (2015).10.1007/s11664-015-3863-9 ↗
7. C.-Y. Yu and J.-G. Duh, Scr. Mater. 65, 783 (2011).10.1016/j.scriptamat.2011.07.029 ↗
8. Y. Leong, A. Haseeb, H. Nishikawa, and O. Mokhtari, J. Mater. Sci. Mater. Electron. 30, 11914 (2019).10.1007/s10854-019-01532-5 ↗
9. B. Chen and G. Li, Thin Solid Films 462, 395 (2004).10.1016/j.tsf.2004.05.063 ↗
10. N. Wade, K. Wu, J. Kunii, S. Yamada, and K. Miyahara, J. Electron. Mater. 30, 1228 (2001).10.1007/s11664-001-0154-4 ↗
11. G. Li, B. Chen, X. Shi, S.C. Wong, and Z. Wang, Thin Solid Films 504, 421 (2006).10.1016/j.tsf.2005.09.060 ↗
12. J. Kivilahti, Helsinki University of Technology (1996).
13. L. Xu and J.H. Pang, Thin Solid Films 504, 362 (2006).10.1016/j.tsf.2005.09.056 ↗
14. M. Amagai, Microelectr. Rel. 48, 1 (2008).10.1016/j.microrel.2007.05.004 ↗
15. T. Laurila, V. Vuorinen, and M. Paulasto-Kröckel, Mater. Sci. Eng. R 68, 1 (2010).10.1016/j.mser.2009.12.001 ↗
16. C. Yang, F. Song, and S. R. Lee, in 2011 IEEE 61st Electronic Components and Technology Conference (ECTC) (IEEE, 2011).
17. K. Nogita, Intermetallics 18, 145 (2010).10.1016/j.intermet.2009.07.005 ↗
18. K. Nogita, C. Gourlay, and T. Nishimura, JOM 61, 45 (2009).10.1007/s11837-009-0087-6 ↗
19. K. Nogita and T. Nishimura, Scr. Mater. 59, 191 (2008).10.1016/j.scriptamat.2008.03.002 ↗
20. K. Sweatman and T. Nishimura, IPC Printed Circuits Expo, APEX and the Desidners Summit. Osaka, Japan, 1 (2006).
21. G. Henshall et al., in Proceedings SMTA International (2008).
22. Y.-L. Tseng, Y.-C. Chang, and C.-C. Chen, J. Electron. Mater. 44, 581 (2015).10.1007/s11664-014-3517-3 ↗
23. S.-W. Chen, Y.-K. Chen, H.-J. Wu, Y.-C. Huang, and C.-M. Chen, J. Electron. Mater. 39, 2418 (2010).10.1007/s11664-010-1337-7 ↗
24. C. Du, X. Wang, and S. Tian, J. Mater. Sci. Mater. Electron. 29, 455 (2018).10.1007/s10854-017-7934-y ↗
25. C.-H. Wang and S.-W. Chen, J. Mater. Res. 22, 3404 (2007).10.1557/JMR.2007.0422 ↗
26. Z. Lai, X. Kong, Q. You, and X. Cao, Microelectr. Rel. 68, 69 (2017).10.1016/j.microrel.2016.11.008 ↗
27. Y.-C. Huang and S.-W. Chen, J. Electron. Mater. 40, 62 (2011).10.1007/s11664-010-1386-y ↗
28. M.N. Bashir, A. Haseeb, A.Z.M.S. Rahman, and M. Fazal, J. Mater. Sci. Technol. 32, 1129 (2016).10.1016/j.jmst.2016.09.007 ↗
29. J. Jiang, S. Tsao, T. O’Sullivan, M. Razeghi, and G.J. Brown, Infra. Phys. Technol. 45, 143 (2004).
30. T. Ventura, C.M. Gourlay, K. Nogita, T. Nishimura, M. Rappaz, and A.K. Dahle, J. Electron. Mater. 37, 32 (2008).10.1007/s11664-007-0281-7 ↗
31. S.U. Mehreen, K. Nogita, S. McDonald, H. Yasuda, and D. StJohn, J. Alloys Compd. 766, 1003 (2018).10.1016/j.jallcom.2018.06.251 ↗
32. J. Chen, Y.-S. Lai, C.-Y. Ren, and D.-J. Huang, Appl. Phys. Lett. 92, 081901 (2008).10.1063/1.2884685 ↗
33. T. Laurila, J. Hurtig, V. Vuorinen, and J.K. Kivilahti, Microelectr. Rel. 49, 242 (2009).10.1016/j.microrel.2008.08.007 ↗
34. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng. R 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
35. Y. Wang, Y. Lin, C. Tu, and C. Kao, J. Alloys Compd. 478, 121 (2009).10.1016/j.jallcom.2008.11.052 ↗
36. F. Wang, X. Ma, and Y. Qian, Scr. Mater. 53, 699 (2005).10.1016/j.scriptamat.2005.05.013 ↗
37. S.K. Kang, D.-Y. Shih, D. Leonard, D.W. Henderson, T. Gosselin, S.-I. Cho, J. Yu, and W.K. Choi, JOM 56, 34 (2004).10.1007/s11837-004-0108-4 ↗
38. H. Yasuda, T. Nagira, M. Yoshiya, N. Nakatsuka, A. Sugiyama, K. Uesugi, and K. Umetani, ISIJ Int. 51, 402 (2011).10.2355/isijinternational.51.402 ↗
39. H. Yasuda, T. Nagira, M. Yoshiya, M. Uesugi, N. Nakatsuka, M. Kiire, A. Sugiyama, K. Uesugi, and K. Umetani, in IOP Conf. Ser. Mater. Sci. Eng (IOP Publishing, 2012), p. 012084.10.1088/1757-899X/27/1/012084 ↗
40. C.-H. Lin, S.-W. Chen, and C.-H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
41. C.-H. Wang and S.-W. Chen, Acta Mater. 54, 247 (2006).10.1016/j.actamat.2005.09.006 ↗
42. S.-W. Chen and C.-A. Chang, J. Electron. Mater. 33, 1071 (2004).10.1007/s11664-004-0107-9 ↗
43. Y.-W. Yen, C.-Y. Lee, M.-H. Kuo, K.-S. Chao, and K.-D. Chen, Int. J. Mater. Res. 100, 672 (2009).10.3139/146.110080 ↗
44. S. U. Mehreen, K. Nogita, S. McDonald, and D. StJohn, in IOP Conf. Ser. Mater. Sci. Eng (IOP Publishing, 2019), p. 012009.10.1088/1757-899X/701/1/012009 ↗
45. D. StJohn, Acta Metall. 38, 631 (1990).10.1016/0956-7151(90)90218-6 ↗
46. H.W. Kerr and W. Kurz, Int. Mater. Rev. 41, 129 (1996).10.1179/imr.1996.41.4.129 ↗
47. W. Zhai and B. Wei, Mater. Lett. 108, 145 (2013).10.1016/j.matlet.2013.06.084 ↗
48. Z. Xuan, F. Mao, Z. Cao, T. Wang, and L. Zou, J. Alloys Compd. 721, 126 (2017).10.1016/j.jallcom.2017.05.302 ↗
49. B. Gao, E. Guo, X. Meng, S. Nie, H. Liang, Z. Cao, and T. Wang, Mater. Charact. 158, 109969 (2019).10.1016/j.matchar.2019.109969 ↗
50. K. Nogita, C. Gourlay, S. McDonald, Y. Wu, J. Read, and Q. Gu, Scr. Mater. 65, 922 (2011).10.1016/j.scriptamat.2011.07.058 ↗
51. F. Gao, T. Takemoto, and H. Nishikawa, Mater. Sci. Eng. A 420, 39 (2006).10.1016/j.msea.2006.01.032 ↗
52. Y. Wang, C. Chang, and C. Kao, J. Alloys Compd. 478, L1 (2009).10.1016/j.jallcom.2008.11.027 ↗