journal article·2020-08

Tetrahedrite Sintering Conditions: The Cu11Mn1Sb4S13 Case

Rodrigo Coelho, Elli Symeou, Theodora Kyratsi, António Pereira Gonçalves

Journal of Electronic Materials· Volume 49· Issue 8
Publisher page

Abstract

Manganese-doped tetrahedrites, with Cu11Mn1Sb4S13 composition and synthesized by the solid-state method, were hot-pressed at temperatures ranging between 788 K and 848 K. The structure, microstructure, phase purity and thermoelectric properties of the materials were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and density studies. According to the XRD analysis, all the hot-pressed materials presented a main tetrahedrite phase. However, very small amounts of chalcostibite (CuSbS2) were detected by SEM–EDS. While keeping the pressure constant at 60 MPa, an increase in density with hot-pressing temperature was observed, reaching a maximum relative density of 97% for the samples hot-pressed at 848 K. Measurements of the electrical transport properties indicated higher thermal conductivity, electrical conductivity and Seebeck coefficient for the denser samples, with a greater power factor leading to an increase of > 10% in the figure of merit ( $$zT$$ ) relative to the less dense materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. K. Zeb, S.M. Ali, B. Khan, C.A. Mehmood, N. Tareen, W. Din, U. Farid, and A. Haider, Renew. Sustain. Energy Rev. 75, 1142 (2017).10.1016/j.rser.2016.11.096 ↗
2. A.P. Gonçalves, E.B. Lopes, M.F. Montemor, J. Monnier, and B. Lenoir, Electron. Mater. 47, 2880 (2018).10.1007/s11664-018-6141-9 ↗
3. A. Mehdizadeh Dehkordi, M. Zebarjadi, J. He, and T.M. Tritt, Mater. Sci. Eng. R Rep. 97, 1 (2015).10.1016/j.mser.2015.08.001 ↗
4. A.P. Gonçalves, E.B. Lopes, J. Monnier, E. Alleno, C. Godart, M.D.F. Montemor, J. Vaney, and B. Lenoir, Solid State Phenom. 257, 135 (2017).10.4028/www.scientific.net/SSP.257.135 ↗
5. W. Lai, Y. Wang, D.T. Morelli, and X. Lu, Adv. Funct. Mater. 25, 3648 (2015).10.1002/adfm.201500766 ↗
6. M.K. Koichiro Suekuni and K. Tsuruta, J. Appl. Phys. 043712, 8 (2013).
7. X. Lu, D.T. Morelli, Y. Xia, and V. Ozolins, Chem. Mater. 27, 408 (2015).10.1021/cm502570b ↗
8. S.Y. Kim, S.G. Kwak, J.H. Pi, G.E. Lee, and I.H. Kim, J. Electron. Mater. 48, 1857 (2019).10.1007/s11664-018-6549-2 ↗
9. D.P. Weller and D.T. Morelli, J. Alloys Compd. 710, 794 (2017).10.1016/j.jallcom.2017.03.272 ↗
10. R. Chetty, A. Bali, and R.C. Mallik, J. Mater. Chem. C 3, 12364 (2015).10.1039/C5TC02537K ↗
11. T. Barbier, P. Lemoine, S. Gascoin, O.I. Lebedev, A. Kaltzoglou, P. Vaqueiro, A.V. Powell, R.I. Smith, and E. Guilmeau, J. Alloys Compd. 634, 253 (2015).10.1016/j.jallcom.2015.02.045 ↗
12. J. Heo, G. Laurita, S. Muir, M.A. Subramanian, and D.A. Keszler, Chem. Mater. 26, 2047 (2014).10.1021/cm404026k ↗
13. R. Chetty, D.S. Prem Kumar, G. Rogl, P. Rogl, E. Bauer, H. Michor, S. Suwas, S. Puchegger, G. Giester, and R.C. Mallik, Phys. Chem. Chem. Phys. 17, 1716 (2015).10.1039/C4CP04039B ↗
14. J. Pi, G. Lee, and I. Kim, J. Electron. Mater. 49, 2710 (2019).10.1007/s11664-019-07570-3 ↗
15. T.J.B. Holland and S.A.T. Redfern, Mineral. Mag. 61, 65 (1997).10.1180/minmag.1997.061.404.07 ↗
16. P. Lv, Y. Yu, and X. Li, Advances in Energy and Environmental Materials (Singapore: Springer, 2018).
17. J. Wang, X. Li, and Y. Bao, Mater. Sci. Forum 847, 161 (2016).10.4028/www.scientific.net/MSF.847.161 ↗
18. Y. Mishima, Y. Kimura, and S.W. Kim, Enhancement of Thermoelectric Figure of Merit Through Nanostructural Control on Intermetallic Semiconductors Toward High-Temperature Applications (Amsterdam: Elsevier Ltd, 2006).10.1016/B978-008044964-7/50013-3 ↗
19. K. Berland, X. Song, P.A. Carvalho, C. Persson, T.G. Finstad, and O.M. Løvvik, J. Appl. Phys. 119, 125103 (2016).10.1063/1.4944716 ↗
20. R. Zahra, J. Jacob, N. Bano, A. Ali, K. Mahmood, S. Ikram, M.I. Arshad, A. Ashfaq, U. Rehman, and S. Hussain, Phys. B Condens. Matter 564, 143 (2019).10.1016/j.physb.2019.02.061 ↗
21. D. Narducci, E. Selezneva, G. Cerofolini, S. Frabboni, and G. Ottaviani, J. Solid State Chem. 193, 19 (2012).10.1016/j.jssc.2012.03.032 ↗
22. G. Zhu, W. Liu, Y. Lan, G. Joshi, H. Wang, G. Chen, and Z. Ren, Nano Energy 2, 1172 (2013).10.1016/j.nanoen.2013.04.010 ↗
23. R. Ma, G. Liu, J. Li, Y. Li, K. Chen, Y. Han, M. Zhou, and L. Li, Ceram. Int. 43, 7002 (2017).10.1016/j.ceramint.2017.02.126 ↗
24. S. Kumar, M.Z. Ansari, and N. Khare, Thin Solid Films 645, 300 (2018).10.1016/j.tsf.2017.11.001 ↗
25. H.S. Kim, Z.M. Gibbs, Y. Tang, H. Wang, and G.J. Snyder, APL Mater. 3, 1 (2015).
26. R. Chetty, A. Bali, M.H. Naik, G. Rogl, P. Rogl, M. Jain, S. Suwas, and R.C. Mallik, Acta Mater. 100, 266 (2015).10.1016/j.actamat.2015.08.040 ↗