journal article·2020-08

Vertical Interconnections by Electroless Au Deposition on Electroless Ni Immersion Au Surface Finish

I. A. Weng, H. T. Hung, W. C. Huang, C. R. Kao, Y. H. Chen

Journal of Electronic Materials· Volume 49· Issue 8
Publisher page

Abstract

Electroless Au is used to vertically connect copper pillars with electroless Ni immersion Au surface finish on two stacked chips by a microfluidic electroless interconnection process. A very low bonding temperature of 50°C and a pressure-less bonding process can be achieved. The vertical interconnections are formed by a forced flow of electroless Au plating solution through a microchannel so that the reduced Au atoms self-assemble between the gaps of facing copper pillars to complete the interconnections. The deposited Au grains span the entire gap across the two copper pillars, suggesting that the rate-limiting step is more likely to be the nucleation rather than the growth of the Au grains. Four-point probe measurements show that the average resistance of the electroless-Au-bonded interconnections is low. Mechanical shear testing reveals that the bonding of the interconnections is strong. Furthermore, it is demonstrated that this process is capable of accommodating a high degree of pillar misalignment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. K. Chen, C. Tan, A. Fan, and R. Reif, Electrochem. Solid-State Lett. 7, G14–G16 (2004).10.1149/1.1626994 ↗
2. C. Okoro, M. Gonzalez, B. Vandevelde, B. Swinnen, G. Eneman, S. Stoukatch, E. Beyne, and D. Vandepitte, Proceedings of Electronic Components and Technology Conference, 249–255 (2007).
3. Y.I. Kim, K.H. Yang, and W.S. Lee, Proceedings of Reliability Physics Symposium Proceedings, 667–668 (2004).
4. A.K. Panigrahy and K.N. Chen, J. Electron. Packag. 140, 010801 (2018).10.1115/1.4038392 ↗
5. H. Takagi, K. Kikuchi, R. Maeda, T. Chung, and T. Suga, Appl. Phys. Lett. 68, 2222–2224 (1996).10.1063/1.115865 ↗
6. T.H. Kim, M.M.R. Howlader, T. Itoh, and T. Suga, J. Vac. Sci. Technol. A 21, 449–453 (2003).10.1116/1.1537716 ↗
7. C.S. Tan, D.F. Lim, S.G. Singh, S. Goulet, and M. Bergkvist, Appl. Phys. Lett. 95, 192108 (2009).10.1063/1.3263154 ↗
8. C.S. Tan, D.F. Lim, X.F. Ang, J. Wei, and K.C. Leong, Microelectron. Reliab. 52, 321–324 (2012).10.1016/j.microrel.2011.04.003 ↗
9. C.S. Tan and D.F. Lim, ECS Trans. 50, 115–123 (2013).10.1149/05007.0115ecst ↗
10. H.Y. Chen, S.Y. Hsu, and K.N. Chen, Proceedings of VLSI Technology, Systems, and Applications (VLSI-TSA), 1–2 (2013).
11. Y.P. Huang, Y.S. Chien, R.N. Tzeng, M.S. Shy, T.H. Lin, K.H. Chen, C.T. Chiu, J.C. Chiou, C.T. Chuang, and W. Hwang, IEEE Electron Device Lett. 34, 1551–1553 (2013).10.1109/LED.2013.2285702 ↗
12. C.M. Liu, H.W. Lin, Y.S. Huang, Y.C. Chu, C. Chen, D.R. Lyu, K.N. Chen, and K.N. Tu, Sci. Rep.5 (2015).10.1038/srep09734 ↗
13. H.T. Hung, S. Yang, Y.B. Chen, and C.R. Kao, J. Electron. Mater. 46, 4321–4325 (2017).10.1007/s11664-017-5385-0 ↗
14. S. Yang, H.T. Hung, P.Y. Wu, Y.W. Wang, H. Nishikawa, and C.R. Kao, J. Electrochem. Soc. 165, D273–D281 (2018).10.1149/2.0441807jes ↗
15. I.A. Weng, H.T. Hung, S. Yang, Y.H. Chen, and C.R. Kao, Proceedings of Electronics Packaging and iMAPS All Asia Conference (ICEP-IAAC), 2018 International Conference on, 87–90 (2018).
16. I.A. Weng, H.T. Hung, S. Yang, C.R. Kao, and Y.H. Chen, Scr. Mater. 159, 119–122 (2019).10.1016/j.scriptamat.2018.09.026 ↗
17. J.W. Yoon, H.S. Chun, and S.B. Jung, J. Alloys Compd. 469, 108–115 (2009).10.1016/j.jallcom.2008.01.077 ↗
18. S. Zhang, J. De Baets, M. Vereeken, A. Vervaet, and A. Van Calster J. Electrochem. Soc. 146, 2870–2875 (1999).10.1149/1.1392022 ↗
19. A.M. Van Der Putten and J.W.G. de Bakker, J. Electrochem. Soc. 140, 2229–2235 (1993).10.1149/1.2220800 ↗
20. N.A.A.M. Amin, D.A. Shnawah, S.M. Said, M.F.M. Sabri, and H. Arof, J. Alloys Compd. 599, 114–120 (2014).10.1016/j.jallcom.2014.02.100 ↗
21. J. Pan, B.J. Toleno, T.C. Chou, and W.J. Dee, Sold. Surf. Mt. Technol. 18, 48–56 (2006).10.1108/09540910610717901 ↗
22. T. Hayashi, IEEE transactions on components, hybrids, and manufacturing technology 15, 225–230 (1992).10.1109/33.142898 ↗