Enhanced Photocatalytic Properties of Zinc-Doped CuO Decorated with Silver Obtained by Microwave-Assisted Hydrothermal Method: Statistical Factorial Design
Source abstract
Abstract
Zinc-doped CuO powders were obtained by microwave-assisted hydrothermal processing at 140°C for 30 min then decorated with silver by photodeposition and characterized by x-ray diffraction (XRD) analysis, field-scanning electron microscopy (SEM), and ultraviolet–visible (UV–Vis) spectroscopy region for Egap estimation. The photocatalytic activity of the powders was measured using methylene blue dye. To provide further information on the influence of the process variables on the photocatalytic activity, a 23 factorial design was carried out with three central points, using the amounts of zinc and silver and the stirring time under UV radiation as variables. The XRD patterns indicated ZnO precipitation when 8% Zn was added. SEM micrographs showed that the CuO had predominantly nanoplate morphology, with loss of the regular aspect of the ends and increased thickness on addition of zinc atoms. The photocatalytic activity results showed that addition of zinc and silver increased the photocatalytic activity of pure CuO. According to the factorial design, the stirring time of the CuO powder in contact with AgNO3 solution was the most significant variable affecting the photocatalytic properties, with longer time being detrimental due to an increase in the size of the silver nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Y. AlSalka, A. Hakki, M. Fleisch, and D.W. Bahnemann, J. Photochem. Photobiol. A 366, 81–90 (2018).10.1016/j.jphotochem.2018.04.008 ↗
2. A. Shirmardi, M. Asri Mat Teridi, H.R. Azimi, W. Jeffrey Basirun, F. Jamali-Sheini, and R. Yousefi, Appl. Surf. Sci. 462, 730–738 (2018).10.1016/j.apsusc.2018.06.252 ↗
3. M.P. Rao, J.J. Wu, A.M. Asiri, S. Anandan, and M. Ashokkumar, J. Environ. Sci. 69, 115–124 (2018).10.1016/j.jes.2017.05.005 ↗
4. C. Hu, L. Lu, Y. Zhu, R. Li, and Y. Xing, Mater. Chem. Phys. 217, 182–191 (2018).10.1016/j.matchemphys.2018.06.068 ↗
5. M. Montero-Muñoz, J.E. Ramos-Ibarra, J.E. Rodríguez-Páez, M.D. Teodoro, G.E. Marques, A.R. Sanabria, P.C. Cajas, C.A. Páez, B. Heinrichs, and J.A.H. Coaquira, Appl. Surf. Sci. 448, 646–654 (2018).10.1016/j.apsusc.2018.04.105 ↗
6. X. Wang, C. Zhou, W. Wang, B. Du, J. Cai, G. Feng, and R. Zhang, J. Alloys Compd. 747, 826–833 (2018).10.1016/j.jallcom.2018.02.351 ↗
7. A.J. Haider, R.H. Al–Anbari, G.R. Kadhim, and C.T. Salame, Energy Procedia 119, 332–345 (2017).10.1016/j.egypro.2017.07.117 ↗
8. B. Sarma and B.K. Sarma, J. Alloys Compd. 734, 210–219 (2018).10.1016/j.jallcom.2017.11.028 ↗
9. P. Wang, C. Yu, J. Ding, X. Wang, and H. Yu, J. Alloys Compd. 752, 238–246 (2018).10.1016/j.jallcom.2018.04.163 ↗
10. Z. Ye, L. Kong, F. Chen, Z. Chen, Y. Lin, and C. Liu, Optik 164, 345–354 (2018).10.1016/j.ijleo.2018.03.030 ↗
11. N.F. Andrade Neto, E. Longo, K.N. Matsui, C.A. Paskocimas, M.R.D. Bomio, and F.V. Motta, Plasmonics 14, 79–89 (2018).10.1007/s11468-018-0780-9 ↗
12. X. Yang, G. Jiuji, Z. Zhaowu, H. Zhang, and T. Qi, Chin. J. Chem. Eng. 26, 830–837 (2018).10.1016/j.cjche.2017.12.007 ↗
13. C. Sun, Y. Gu, W. Wen, and L. Zhao, Opt. Mater. 81, 12–22 (2018).10.1016/j.optmat.2018.05.005 ↗
14. L. Vimala Devi, S. Sellaiyan, T. Selvalakshmi, H.J. Zhang, A. Uedono, K. Sivaji, and S. Sankar, Adv. Powder Technol. 28, 3026–3038 (2017).10.1016/j.apt.2017.09.013 ↗
15. V. Siahpoush, S. Ahmadi-kandjani, and A. Nikniazi, Opt. Commun. 420, 52–58 (2018).10.1016/j.optcom.2018.03.021 ↗
16. J. Li, X.A. Dong, Y. Sun, W. Cen, and F. Dong, Appl. Catal. B 226, 269–277 (2018).10.1016/j.apcatb.2017.12.057 ↗
17. Z. Wang, S. Yan, Y. Sun, T. Xiong, F. Dong, and W. Zhang, Appl. Catal. B 214, 148–157 (2017).10.1016/j.apcatb.2017.05.040 ↗
18. K.W. Jung, D.H. Kim, H.W. Kim, and H.S. Shin, Int. J. Hydrogen Energy 36, 9626–9631 (2011).10.1016/j.ijhydene.2011.05.050 ↗
19. Y. Zou, A. Jiang, and M. Tian, Food Sci. Technol. 35, 428–433 (2015).10.1590/1678-457X.6712 ↗
20. N. Neto, L.M.P. Garcia, E. Longo, M. Li, C.A. Paskocimas, M.R.D. Bomio, and F.V. Motta, J. Mater. Sci.: Mater. Electron. 28, 12273–12281 (2017).
21. L. Latrous El Atrache, R. Ben Sghaier, B. Bejaoui Kefi, V. Haldys, M. Dachraoui, and J. Tortajada, Talanta 117, 392–398 (2013).10.1016/j.talanta.2013.09.032 ↗
22. D.L. Wood and J. Tauc, Phys. Rev. B 5, 3144–3151 (1972).10.1103/PhysRevB.5.3144 ↗
23. Y. Xue, G. Yu, Z. Shan, and Z. Li, J. Photochem. Photobiol. B 186, 131–136 (2018).10.1016/j.jphotobiol.2018.07.004 ↗
24. J. Kaur, S.K. Tripathi, M.D.Sharma Ankush, and N.Goyal Kanika, Mater. Today Proc. 4, 9524–9528 (2017).10.1016/j.matpr.2017.06.217 ↗
25. K. Chandrappa and T. Venkatesha, Mater. Corros. 64, 831–839 (2013).10.1002/maco.201206767 ↗
26. M. Liu, W. Li, Y. Wang, and Q. He, Phys. B 545, 245–249 (2018).10.1016/j.physb.2018.06.026 ↗
27. M.J. McKelvy, R. Sharma, A.V.G. Chizmeshya, R.W. Carpenter, and K. Streib, Chem. Mater. 13, 921–926 (2001).10.1021/cm000676t ↗
28. F.V. Motta, A.P.A. Marques, M.S. Li, M.F.C. Abreu, C.A. Paskocimas, M.R.D. Bomio, R.P. Souza, J.A. Varela, and E. Longo, J. Alloys Compd. 553, 338–342 (2013).10.1016/j.jallcom.2012.11.063 ↗
29. S. Bazazi, N. Arsalani, A. Khataee, and A.G. Tabrizi, J. Ind. Eng. Chem. 62, 265–272 (2018).10.1016/j.jiec.2018.01.004 ↗
30. Y. Xu, D. zhu, Y. Song, X. Zheng, and X. You, J. Mol. Struct. 782, 165–170 (2006).10.1016/j.molstruc.2005.08.010 ↗
31. S. Sonia, I. Jose Annsi, P. Suresh Kumar, D. Mangalaraj, C. Viswanathan, and N. Ponpandian, Mater. Lett. 144, 127–130 (2015).10.1016/j.matlet.2015.01.026 ↗
32. A. Albert Manoharan, R. Chandramohan, R. David Prabu, S. Valanarasu, V. Ganesh, M. Shkir, A. Kathalingam, and S. AlFaify, J. Mol. Struct. 1171, 388–395 (2018).10.1016/j.molstruc.2018.06.018 ↗
33. A. Pugazhendhi, S.S. Kumar, M. Manikandan, and M. Saravanan, Microb. Pathog. 122, 84–89 (2018).10.1016/j.micpath.2018.06.016 ↗
34. K. Deepa and T.V. Venkatesha, Mater. Today Proc. 4, 12045–12053 (2017).10.1016/j.matpr.2017.09.129 ↗
35. M. Ponnar, C. Thangamani, P. Monisha, S.S. Gomathi, and K. Pushpanathan, Appl. Surf. Sci. 449, 132–143 (2018).10.1016/j.apsusc.2018.01.126 ↗
36. J. Kaur, K. Gupta, V. Kumar, S. Bansal, and S. Singhal, Ceram. Int. 42, 2378–2385 (2016).10.1016/j.ceramint.2015.10.035 ↗
37. X. Zhang, L. Wang, Y. Zou, X. Peng, M. Zhang, S. Gao, J. Xu, K. Tang, and D. Zhao, Mater. Lett. 166, 243–246 (2016).10.1016/j.matlet.2015.12.093 ↗
38. L.-H. Chang and C.-P. Cho, Solid State Sci. 62, 112–120 (2016).10.1016/j.solidstatesciences.2016.11.006 ↗
39. C. Chen, K. Zhu, K. Chen, A. Alsaedi, and T. Hayat, J. Colloid Interface Sci. 526, 1–8 (2018).10.1016/j.jcis.2018.04.094 ↗
40. A. Moumen, B. Hartiti, E. Comini, Z. El khalidi, H.M.M.M. Arachchige, S. Fadili, and P. Thevenin, Superlattices Microstruct. 127, 2–10 (2018).10.1016/j.spmi.2018.06.061 ↗
41. Y. Zhang, P. Zhu, G. Li, L. Chen, C. Cui, K. Zhang, R. Sun, and C. Wong, Mater. Lett. 212, 332–335 (2018).10.1016/j.matlet.2017.10.127 ↗
42. M.A. Green, J. Appl. Phys. 67, 2944–2954 (1990).10.1063/1.345414 ↗
43. C.-M. Chou, Y.-C. Chang, P.-S. Lin, and F.-K. Liu, Mater. Chem. Phys. 201, 18–25 (2017).10.1016/j.matchemphys.2017.08.023 ↗
44. M.A. Hernández-Carrillo, R. Torres-Ricárdez, M.F. García-Mendoza, E. Ramírez-Morales, L. Rojas-Blanco, L.L. Díaz-Flores, G.E. Sepúlveda-Palacios, F. Paraguay-Delgado, and G. Pérez-Hernández, Catal. Today (2018). https://doi.org/10.1016/j.cattod.2018.04.060 .10.1016/j.cattod.2018.04.060 ↗
45. J. Huang, G. Fu, C. Shi, X. Wang, M. Zhai, and C. Gu, J. Phys. Chem. Solids 75, 1011–1016 (2014).10.1016/j.jpcs.2014.02.009 ↗
46. N.I. Matskevich, T. Wolf, M. Merz, P. Adelmann, O.I. Anyfrieva, and M.Y. Matskevich, Mendeleev Commun. 28, 108–109 (2018).10.1016/j.mencom.2018.01.037 ↗
47. K.Y. Jung, J.C. Lee, D.S. Kim, B.-K. Choi, and W.-J. Kang, J. Lumin. 192, 1313–1321 (2017).10.1016/j.jlumin.2017.09.017 ↗
48. P. Malara, A. Crescitelli, V. Di Meo, A. Giorgini, S. Avino, E. Esposito, A. Ricciardi, A. Cusano, I. Rendina, P. De Natale, and G. Gagliardi, Sens. Actuators B Chem. 273, 1587–1592 (2018).10.1016/j.snb.2018.07.030 ↗
49. B. Jiang and C. Sun, Phys. E 101, 62–70 (2018).10.1016/j.physe.2018.03.019 ↗
50. A. Khuri and J. Cornell, Response Surfaces, Design, and Analyses, Vol. 1 (New York: Marcel Dekker, 1996).
51. I. Papailias, M. Giannouri, A. Trapalis, N. Todorova, T. Giannakopoulou, N. Boukos, and C. Lekakou, Appl. Surf. Sci. 358, 84–90 (2015).10.1016/j.apsusc.2015.08.143 ↗
52. Y. Liu, W. Gao, C. Zhang, L. Zhang, and Y. Zhi, J. Taiwan Inst. Chem. Eng. 88, 277–285 (2018).10.1016/j.jtice.2018.04.020 ↗