journal article·2019-01

Effect of Silver and Iodine Co-doping on the Thermoelectric Properties of n-Type Bi2S3

Junnan Yan, Jian Yang, Bangzhi Ge, Guiwu Liu, Zhongqi Shi, Zhewen Duan, Guanjun Qiao

Journal of Electronic Materials· Volume 48· Issue 1
Publisher page

Abstract

Bi2S3 is a promising thermoelectric material due to its low thermal conductivity. However, the low electrical conductivity has become an obstacle for its higher thermoelectric properties. To overcome this, on the basis of 1 mol.% BiI3 doping, Bi2S3 polycrystalline samples doped with various silver (Ag) concentrations were successfully prepared by melting combined with spark plasma sintering (SPS) to improve thermoelectric properties. The variation of lattice parameters were analyzed using x-ray diffraction, and electrical and thermal properties were investigated in the temperature range from 300 K to 723 K. The Ag and iodine (I) co-doping plays an important role in enhancing the electrical conductivity and maintaining a high Seebeck coefficient simultaneously. An ideal power factor of 3.95 μW cm−1 K−2 is obtained for the Ag0.0075Bi2S3 sample at 723 K. Meanwhile, the thermal conductivity is also reduced. As a result, a high thermoelectric figure-of-merit (ZT) of 0.62 is achieved, which is four times higher than that of pristine Bi2S3 at the same temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Heusler alloys: electronic and magnetic properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M.G. Kanatzidis, Chem. Mater. 22, 648 (2009).10.1021/cm902195j ↗
2. L.E. Bell, Science 321, 1457 (2008).10.1126/science.1158899 ↗
3. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗
4. J.R. Sootsman, D.Y. Chung, and M.G. Kanatzidis, Angew. Chem. Int. Ed. 48, 8616 (2009).10.1002/anie.200900598 ↗
5. J. Yang, X.Z. Zhang, B.Z. Ge, J.N. Yan, G.W. Liu, Z.Q. Shi, and G.J. Qiao, Ceram. Int. 43, 15275 (2017).10.1016/j.ceramint.2017.08.065 ↗
6. M. Zebarjadi, B. Liao, K. Esfarjani, M. Dresselhaus, and G. Chen, Adv. Mater. 25, 1577 (2013).10.1002/adma.201204802 ↗
7. J. Yang, G.W. Liu, J.N. Yan, X.Z. Zhang, Z.Q. Shi, and G.J. Qiao, J. Alloys Compd. 728, 351 (2017).10.1016/j.jallcom.2017.08.148 ↗
8. J. Yang, G.W. Liu, Z.Q. Shi, J.P. Lin, X. Ma, Z.W. Xu, and G.J. Qiao, Mater. Today Energy 3, 72 (2017).10.1016/j.mtener.2017.02.005 ↗
9. J.P. Heremans, V. Jovovic, E.S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, and G.J. Snyder, Science 554, 321 (2008).
10. Y. Pei, J. Lensch-Falk, E.S. Toberer, D.L. Medlin, and G.J. Snyder, Adv. Funct. Mater. 21, 241 (2011).10.1002/adfm.201000878 ↗
11. A. Soni, Y.Y. Zhao, L.G. Yu, M.K.K. Aik, M.S. Dresselhaus, and Q.H. Xiong, Nano Lett. 12, 1203 (2012).10.1021/nl2034859 ↗
12. K. Biswas, J. He, I.D. Blum, C.I. Wu, T.P. Hogan, D.N. Seidman, and M.G. Kanatzidis, Nature 489, 414 (2012).10.1038/nature11439 ↗
13. G.Q. Zhang, B. Kirk, L.A. Jauregui, H.R. Yang, X.F. Xu, Y.P. Chen, and Y. Wu, Nano Lett. 12, 56 (2012).10.1021/nl202935k ↗
14. S.N. Girard, J.Q. He, X.Y. Zhou, D. Shoemarker, C.M. Christopher, C. Uher, V.P. Dravid, J.P. Heremans, and M.G. Kanatzidis, J. Am. Chem. Soc. 133, 16588 (2011).10.1021/ja206380h ↗
15. Y. He, T. Day, T.S. Zhang, H.L. Liu, X. Shi, L.D. Chen, and G.J. Snyder, Adv. Mater. 26, 3974 (2014).10.1002/adma.201400515 ↗
16. Z.H. Ge, B.P. Zhang, Y.X. Chen, Z.X. Yu, Y. Liu, and J.F. Li, Chem. Commun. 47, 12697 (2011).10.1039/c1cc16368j ↗
17. G. Joshi, H. Lee, Y. Lan, X. Wang, G. Zhu, D. Wang, and G. Chen, NanoLett. 8, 4670 (2008).10.1021/nl8026795 ↗
18. V.K. Zaitsev, M.I. Fedorov, E.A. Gurieva, I.S. Eremin, P.P. Konstantinov, A.Y. Samunin, and M.V. Vedernikov, Phys. Rev. B 74, 045207 (2006).10.1103/PhysRevB.74.045207 ↗
19. N. Tsujii and T. Mori, Appl. Phys. Express 6, 043001 (2013).10.7567/APEX.6.043001 ↗
20. J. Li, Q. Tan, and J.F. Li, J. Alloys Compd. 551, 143 (2013).10.1016/j.jallcom.2012.09.067 ↗
21. T.C. Harman, P.J. Taylor, M.P. Walsh, and B.E. LaForge, Science 297, 2229 (2002).10.1126/science.1072886 ↗
22. P. Boudjouk, M.P. Remington, D.G. Grier, B.R. Jarabek, and G.J. McCarthy, Inorg. Chem. 37, 3538 (2008).10.1021/ic971463h ↗
23. Z.H. Ge, B.P. Zhang, Y. Liu, and J.F. Li, Phys. Chem. Chem. Phys. 14, 4475 (2012).10.1039/c2cp23955h ↗
24. S.C. Liufu, L.D. Chen, D. Yao, and C.F. Wang, Appl. Phys. Lett. 90, 112106 (2007).10.1063/1.2712504 ↗
25. H. Mizoguchi, H. Hosono, N. Ueda, and H. Kawazoe, J. Appl. Phys. 78, 1376 (1995).10.1063/1.360315 ↗
26. Z.H. Ge, B.P. Zhang, Y.Q. Yu, and P.P. Shang, J. Alloys Compd. 514, 205 (2012).10.1016/j.jallcom.2011.11.072 ↗
27. Y.Q. Yu, B.P. Zhang, Z.H. Ge, P.P. Shang, and Y.X. Chen, Mater. Chem. Phys. 131, 216 (2011).10.1016/j.matchemphys.2011.09.010 ↗
28. Tarachand, V. Sharma, R. Bhatt, V. Ganesan, and G.S. Okram, Nano Res. 9, 3291 (2016).10.1007/s12274-016-1207-6 ↗
29. F. Han, H. Liu, C.D. Malliakas, M. Sturza, D.Y. Chung, X. Wan, and M.G. Kanatzidis, Inorg. Chem. 55, 3547 (2016).10.1021/acs.inorgchem.6b00025 ↗
30. P. Tomes, X. Yan, R. Kastner, R. Svagera, M. Waas, J. Eilertsen, A. Weidenkaff, and S. Paschen, J. Alloys Compd. 654, 300 (2016).10.1016/j.jallcom.2015.09.023 ↗
31. K. Biswas, L.D. Zhao, and M.G. Kanatzidis, Adv. Energy Mater. 2, 634 (2012).10.1002/aenm.201100775 ↗
32. L.D. Zhao, B.P. Zhang, J.F. Li, H.L. Zhang, and W.S. Liu, Solid State Sci. 10, 651 (2008).10.1016/j.solidstatesciences.2007.10.022 ↗
33. H.W. Zhao, X.X. Xu, C. Li, R. Tian, R.Z. Zhang, R. Huang, Y.N. Lyu, D.X. Li, X.H. Hu, L. Pan, and Y.F. Wang, J. Mater. Chem. A 5, 23267 (2017).10.1039/C7TA07140J ↗
34. G.P. Srivastava, Rep. Prog. Phys. 78, 026501 (2015).10.1088/0034-4885/78/2/026501 ↗