journal article·2018-06

Analytical Investigation of the Limits for the In-Plane Thermal Conductivity Measurement Using a Suspended Membrane Setup

V. Linseis, F. Völklein, H. Reith, P. Woias, K. Nielsch

Journal of Electronic Materials· Volume 47· Issue 6
Publisher page

Abstract

An analytical study has been performed on the measurement capabilities of a 100-nm thin suspended membrane setup for the in-plane thermal conductivity measurements of thin film samples using the 3ω measurement technique, utilizing a COSMOL Multiphysics simulation. The maximum measurement range under observance of given boundary conditions has been studied. Three different exemplary sample materials, with a thickness from the nanometer to the micrometer range and a thermal conductivity from 0.4 W/mK up to 100 W/mK have been investigated as showcase studies. The results of the simulations have been compared to a previously published evaluation model, in order to determine the deviation between both and thereby the measurement limit. As thermal transport properties are temperature dependent, all calculations refer to constant room temperature conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Heat Transfer and Optimization · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. J.-H. Bahk, T. Favaloro, and A. Shakouri, Ann. Rev. Heat Trans. 16, 51 (2013).10.1615/AnnualRevHeatTransfer.v16.30 ↗
2. C. Dames, Annual Review of Heat Transfer 16, 7 (2013).10.1615/AnnualRevHeatTransfer.v16.20 ↗
3. D.G. Cahill, Rev. Sci. Instrum. 61, 802 (1990).10.1063/1.1141498 ↗
4. D.G. Cahill, M. Katiyar, and J.R. Abelson, Phys. Rev. B 50, 6077 (1994).10.1103/PhysRevB.50.6077 ↗
5. F. Völklein, Thin Solid Films 188, 27 (1990).10.1016/0040-6090(90)90190-O ↗
6. A. Jacquot, G. Chen, H. Scherrer, A. Dauscher, and B. Lenoir, Sens. Actuators A Phys. 117, 203 (2005).10.1016/j.sna.2004.06.013 ↗
7. F. Völklein, H. Reith, and A. Meier, Phys. Status Solidi (a) 210, 106 (2013).10.1002/pssa.201228478 ↗
8. V. Linseis, F. Völklein, H. Reith, P. Woias, and K. Nielsch, J. Mater. Res. 31, 3196 (2016).10.1557/jmr.2016.353 ↗
9. A. Sikora, H. Ftouni, J. Richard, C. Hébert, D. Eon, F. Omnès, and O. Bourgeois, Rev. Sci. Instrum. 83, 54902 (2012).10.1063/1.4704086 ↗
10. A. Sikora, H. Ftouni, J. Richard, C. Hébert, D. Eon, F. Omnès, and O. Bourgeois, Rev. Sci. Instrum. 84, 29901 (2013).10.1063/1.4793652 ↗
11. X. Zhang and L.-D. Zhao, J. Mater. 1, 92 (2015).
12. D. Beretta, A.J. Barker, I. Maqueira-Albo, A. Calloni, G. Bussetti, G. Dell’Erba, A. Luzio, L. Duò, A. Petrozza, G. Lanzani, and M. Caironi, ACS Appl. Mater. Interfaces. 9, 18151 (2017).10.1021/acsami.7b04533 ↗
13. H. Ftouni, D. Tainoff, J. Richard, K. Lulla, J. Guidi, E. Collin, and O. Bourgeois, Rev. Sci. Instrum. 84, 94902 (2013).10.1063/1.4821501 ↗