journal article·2017-08

Polyimide–Epoxy Composites with Superior Bendable Properties for Application in Flexible Electronics

Sangyoup Lee, Taewon Yoo, Youngyu Han, Hanglim Kim, Haksoo Han

Journal of Electronic Materials· Volume 46· Issue 8
Publisher page

Abstract

The need for flexible electronics with outstanding bending properties is increasing due to the demand for wearable devices and next-generation flexible or rollable smartphones. In addition, the requirements for flexible or rigid–flexible electronics are sharply increasing to achieve the design of space-saving electronic devices. In this regard, coverlay (CL) film is a key material used in the bending area of flexible electronics, albeit infrequently. Because flexible electronics undergo folding and unfolding numerous times, CL films with superior mechanical and bending properties are required so that the bending area can endure such severe stress. However, because current CL films are only used for a designated bending area in the flexible electronics panel, their highly complicated and expensive manufacturing procedure is a disadvantage. In addition, the thickness of CL films must be decreased to satisfy the ongoing requirement for increasingly thin products. However, due to the limitations of the two-layer structure of existing CL films, the manufacturing process cannot be made more cost effective by simply applying more thin film onto the board. To address this problem, we have developed liquid coverlay inks (LCIs) with superior bendable properties, in comparison with CL films, when applied onto flexible electronics using a screen-printing method. The results show that LCIs have the potential to become one of the leading candidates to replace existing CL films because of their lower cost and faster manufacturing process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. J. Guo and Z. Xu, J. Hazard. Mater. 168, 567 (2009).10.1016/j.jhazmat.2009.02.104 ↗
2. A. Tsuchiya, H. Sugama, T. Sunamoto, N. Hidaka, and O. Hashimoto, Electron. Lett. 29, 1216 (2012).10.1049/el.2012.2779 ↗
3. J. LaDou, Int. J. Hyg. Environ. Health 209, 211 (2006).10.1016/j.ijheh.2006.02.001 ↗
4. K.H. Huang and J.G. Duh, J. Electron. Mater. 44, 3934 (2015).10.1007/s11664-015-3865-7 ↗
5. H. Merchant, M. Minor, and Y. Liu, J. Electron. Mater. 28, 998 (1999).10.1007/s11664-999-0176-x ↗
6. A.C. Siegel, S.T. Phillips, M.D. Dickey, N. Lu, Z. Suo, and G.M. Whitesides, Adv. Funct. Mater. 20, 28 (2010).10.1002/adfm.200901363 ↗
7. C.T. Robertson, Printed Circuit Board Designer’s Reference: Basics (Upper Saddle River: Prentice Hall Professional, 2004).
8. S. Wagner and S. Bauer, MRS Bull. 37, 207 (2012).10.1557/mrs.2012.37 ↗
9. J. Fjelstad, Flexible Circuit Technology, 4th ed. (New Delhi: BR, 2011).
10. P. Mandlik, J. Gartside, L. Han, I.C. Cheng, S. Wagner, J.A. Silvernail, R.Q. Ma, M. Hack, and J.J. Brown, Appl. Phys. Lett. 92, 103309 (2008).10.1063/1.2890432 ↗
11. T. Tsutsui and K. Fujita, Adv. Mater. 14, 949 (2002).10.1002/1521-4095(20020705)14:13/14<949::AID-ADMA949>3.0.CO;2-9 ↗
12. V. Woods and R. van der Muelen, Gartner says worldwide wearable devices sales to grow 18.4 percent in 2016. (Gartner, 2016), http://www.gartner.com/newsroom/id/ 3198018 . Accessed 2 February 2016.
13. Global Industry Analysts Inc. Flexible printed circuit boards—a global strategic business report (Global Industry Analyst, Inc,. 2016), http://www.strategyr.com/MarketRes earch/infographTemplate.asp?code=MCP-1852 . Accessed February 2016.
14. J. Vanfleteren, M. Gonzalez, F. Bossuyt, Y.Y. Hsu, T. Vervust, I. De Wolf, and M. Jablonski, MRS Bull. 37, 254 (2012).10.1557/mrs.2012.48 ↗
15. A. Kuntman and H. Kuntman, Microelectron. J. 31, 629 (2000).10.1016/S0026-2692(00)00067-7 ↗
16. B. Cui, Y. Cortot, and T. Veres, Microelectron. Eng. 83, 906 (2006).10.1016/j.mee.2006.01.014 ↗
17. M. Hüske, OnBoard Technol. 6, 18 (2006).
18. K. Cheng, M.H. Yang, W.W. Chiu, C.Y. Huang, J. Chang, T.F. Ying, and Y. Yang, Macromol. Rapid Commun. 26, 247 (2005).10.1002/marc.200400462 ↗
19. M.W. Jawitz, Printed Circuit Board Materials Handbook (New York: McGraw Hill Professional, 1997).
20. V. Subramanian, J.B. Chang, V.A. de la Fuente, D.C. Huang, L. Jagannathan, F. Liao, B. Mattis, S. Molesa, D.R. Redinger, D. Soltman, S.K. Volkman, and Q. Zhang, ESSDERC 2008-38th European Solid-State Device Research Conference (2008). doi: 10.1109/ESSCIRC.2008.4681785 .10.1109/ESSCIRC.2008.4681785 ↗
21. Y. Noguchi, T. Sekitani, and T. Someya, Appl. Phys. Lett. 91, 13 (2007).10.1063/1.2790495 ↗
22. S. Khan, L. Lorenzelli, and R.S. Dahiya, IEEE Sens. J. 15, 3164 (2015).10.1109/JSEN.2014.2375203 ↗
23. T. Someya, Y. Kato, T. Sekitani, S. Iba, Y. Noguchi, Y. Murase, H. Kawaguchi, and T. Sakurai, Proc. Natl. Acad. Sci. USA 102, 12321 (2005).10.1073/pnas.0502392102 ↗
24. F. Bossuyt, J. Guenther, T. Loher, M. Seckel, T. Sterken, and J. de Vries, Microelectron. Reliab. 51, 628 (2011).10.1016/j.microrel.2010.09.032 ↗
25. S.P. Lacour, S. Wagner, Z.Y. Huang, and Z. Suo, Appl. Phys. Lett. 82, 2404 (2003).10.1063/1.1565683 ↗
26. M. Watanabe, H. Shirai, and T. Hirai, J. Appl. Phys. 92, 4631 (2002).10.1063/1.1505674 ↗
27. T. Hatano, Y. Kurosawa, and J. Miyake, J. Electron. Mater. 29, 611 (2000).10.1007/s11664-000-0054-z ↗