Examination of a Thermally Viable Structure for an Unconventional Uni-Leg Mg2Si Thermoelectric Power Generator
Source abstract
Abstract
We have fabricated an unconventional uni-leg structure thermoelectric generator (TEG) element using quad thermoelectric (TE) chips of Sb-doped n-Mg2Si, which were prepared by a plasma-activated sintering process. The power curve characteristics, the effect of aging up to 500 h, and the thermal gradients at several points on the module were investigated. The observed maximum output power with the heat source at 975 K and the heat sink at 345 K was 341 mW, from which the ΔT for the TE chip was calculated to be about 333 K. In aging testing in air ambient, a remarkable feature of the results was that there was no notable change from the initial resistance of the TEG module for as long as 500 h. The thermal distribution for the fabricated uni-leg TEG element was analyzed by finite-element modeling using ANSYS software. To tune the calculation parameters of ANSYS, such as the thermal conductance properties of the corresponding coupled materials in the module, precise measurements of the temperature at various probe points on the module were made. Then, meticulous verification between the measured temperature values and the results calculated by ANSYS was carried out to optimize the parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. M.W. Heller and G.C. Danielson, J. Phys. Chem. Solids 23, 601 (1962).10.1016/0022-3697(62)90519-X ↗
2. R.J. LaBotz, D.R. Mason, and D.F. O’Kane, J. Electrochem. Soc. 110, 121 (1963).10.1149/1.2425688 ↗
3. V.E. Boriseneko, eds., Semiconducting Silicides (New York: Springer, 2000), p. 285.
4. S. Bose, H.N. Acharya, and H.D. Banerjee, J. Mater. Sci. 28, 5461 (1993).10.1007/BF00367816 ↗
5. Y. Noda, H. Kon, Y. Furukawa, N. Otsuka, I. Nishida, and K. Masumoto, Mater. Trans. 33, 845 (1992).10.2320/matertrans1989.33.845 ↗
6. J. Tani and H. Kido, Intermetallics 15, 1202 (2007).10.1016/j.intermet.2007.02.009 ↗
7. N. Fukushima, T. Iida, M. Akasaka, T. Nemoto, T. Sakamoto, R. Kobayashi, H. Taguchi, K. Nishio, and Y. Takanashi, Mater. Res. Soc. Symp. Proc. 1166, 147–152 (2009).10.1557/PROC-1166-N03-21 ↗
8. J. Tani and H. Kido, J. Alloys Compd. 466, 335–340 (2008).10.1016/j.jallcom.2007.11.029 ↗
9. J. Tani and H. Kido, Phisica B 364, 218–224 (2005).10.1016/j.physb.2005.04.017 ↗
10. T. Sakamoto, T. Iida, N. Fukushima, Y. Honda, M. Tada, Y. Taguchi, Y. Mito, H. Taguchi, and Y. Takanashi, Thin Solid Films 519, 8528–8531 (2011).10.1016/j.tsf.2011.05.031 ↗
11. T. Sakamoto, T. Iida, S. Kurosaki, K. Yano, H. Taguchi, K. Nishio, and Y. Takanashi, J. Electron. Mater. 40, 629–634 (2011).10.1007/s11664-010-1489-5 ↗
12. http://www.isolite.co.jp/info/ceramicfiber/seihin2-2/index.html . Accessed 9 July 2011.
13. Thermal Analysis Guide, ANSYS, Inc. (2009).