Effect of Cr Addition on Wetting Behavior Between Cu and High-Temperature Zn-25Sn-0.15Al-0.1Ga-xCr Pb-Free Solder
Source abstract
Abstract
In this study the effect of Cr content (0.02 wt.% to 0.2 wt.%) on the wetting interaction between high-temperature Zn-25Sn-0.15Al-0.1Ga-xCr Pb-free solders and Cu has been investigated using the wetting balance method. Differential scanning calorimetry (DSC) investigation showed that Cr addition reduces the liquidus temperature slightly while raising the solidus temperature. Flux-assisted wetting experiments were carried out at an immersion rate of 15 mm/s at 435°C. The results show that the shortest wetting time of around 0.7 s was achieved when 0.1 wt.% Cr was added, but the wetting force tends to decrease with the Cr content. Cr addition enhances the formation of interfacial Cu5Zn8 intermetallic compound (IMC) during air cooling, but the opposite effect was observed for water cooling. The results suggest that Cr addition depresses the formation of the Cu5Zn8 layer in liquid/solid reaction, but enhances the formation of the Cu5Zn8 layer in solid/solid reaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. K. Suganuma, S.J. Kim, and K.S. Kim, High-Temperature Lead-Free Solders: Properties and Possibilities, 61, 64 JOM (2009).
2. J.E. Lee, K.S. Kim, K. Suganuma, M. Inoue, and G. Izuta, Mater. Trans. 48, 584 (2007).10.2320/matertrans.48.584 ↗
3. J.E. Lee, K.S. Kim, K. Suganuma, J. Takenaka, and K. Hagio, Mater. Trans. 46, 2413 (2005).10.2320/matertrans.46.2413 ↗
4. R. Mahmudi and M. Eslami, J. Mater. Sci.: Mater. Electron. 22, 1168 (2011).
5. R. Mahmudi and M. Eslami, J. Electron. Mater. 39, 2495 (2010).10.1007/s11664-010-1359-1 ↗
6. N.S. Liu and K.L. Lin, Oxid. Met. 78, 285 (2012).
7. N.S. Liu and K.L. Lin, Scripta Mater. 54, 219 (2006).10.1016/j.scriptamat.2005.09.033 ↗
8. X. Chen, A. Hu, M. Li, and D. Mao, J. Alloys Compd. 460, 478 (2008).10.1016/j.jallcom.2007.05.087 ↗
9. G. Zhao, G. Sheng, J. Luo, and X. Yuan, J. Electron. Mater. 41, 2100 (2012).10.1007/s11664-012-2043-4 ↗
10. S. Kim, K.S. Kim, K. Suganuma, and G. Izuta, J. Electron. Mater. 38, 873 (2009).10.1007/s11664-009-0770-y ↗
11. S. Kim, K.S. Kim, S.S. Kim, K. Suganuma, and G. Izuta, J.␣Electron. Mater. 38, 2668 (2009).10.1007/s11664-009-0928-7 ↗
12. J. Bi, A. Hu, J. Hu, T. Luo, M. Li, and D. Mao, Microelectron. Reliab. 51, 636 (2011).10.1016/j.microrel.2010.09.028 ↗
13. J. Hu, A. Hu, M. Li, and D. Mao, Mater. Charact. 61, 355 (2010).10.1016/j.matchar.2009.12.019 ↗
14. Y.T. Wang, C.J. Ho, and H.L. Tsai, Mater. Trans. 51, 1735 (2010).10.2320/matertrans.MJ201004 ↗
15. F.G. Yost, F.M. Hosking, and D.R. Frear, The Mechanics of Solder Alloy Wetting and Spreading (New York: Van Nostrand Reinhold, 1993), p. 148.
16. S.P. Yu, M.C. Wang, and M.H. Hon, J. Mater. Res. 16, 76 (2001).10.1557/JMR.2001.0015 ↗
17. C.W. Hwang, K.S. Kim, and K. Suganuma, J. Electron. Mater. 32, 1249 (2003).
18. W.Y. Lin (Master thesis, NCKU, 2011).
19. R. Abbaschian, L. Abbaschian, and R.E. Reed-Hill, Physical Metallurgy Principles (Stamford, CT: Cengage Learning, 2009), p. 267.
20. T.S. Chow, J. Phys.: Condens. Matter 10, 445 (1998).