journal article·2015-07

Investigation of the Absorption Properties of the Alloys Fe-Ni and Fe-Ni-Cr Prepared by Mechanical Alloying

Gu Shuchao, Duan Yuping, Duan Peng, Wang Song, Qiu Guoping, Liu Yuzhe

Journal of Electronic Materials· Volume 44· Issue 7
Publisher page

Abstract

The microwave-absorption properties and microstructures of Fe-Ni and Fe-Ni-Cr alloys prepared by mechanical alloying were investigated in the frequency range 2–18 GHz. Other properties were studied by scanning electron microscopy, x-ray diffractometry, vibrating sample magnetometry, and transmission line theory. Dependence of reflection loss (RL), electromagnetic properties (permeability μ and permittivity e), magnetic and dielectric loss tangent, impedance matching, and absorber thickness (d) on milling time is discussed. The alloy powders had excellent microwave-absorption properties in the frequency range 7 to 14 GHz. The minimum RL, the frequency at which the RL is minimum, and the bandwidth (RL < −10 dB) all depend on milling time and d. Introduction of Cr affected the RL of the powders, especially the minimum RL of −19.8 dB at 7.2 GHz for Fe-Ni-Cr powder milled for 90 h (compared with −22 dB at 9.9 GHz for Fe-Ni powder milled for the same time), suggesting that the Fe-Ni-Cr alloy could be a promising candidate as a microwave-absorbing filler at low frequencies. This may help broaden the range of microwave-absorbing materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Aluminum Alloys Composites Properties · Magnetic Properties and Synthesis of Ferrites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Y. Feng and T. Qiu, J. Magn. Magn. Mater. 324, 2528 (2012).10.1016/j.jmmm.2012.03.029 ↗
2. J. Wei, J. Wang, Q. Liu, L. Qiao, T. Wang, and F. Li, J. Phys. D 43, 115001 (2010).10.1088/0022-3727/43/11/115001 ↗
3. Q. Liu, D. Zhang, and T. Fan, Appl. Phys. Lett. 93, 013110 (2008).10.1063/1.2957035 ↗
4. J. Zhang, C. Yan, S. Liu, H. Pan, and C. Gong, Appl. Phys. Lett. 100, 233104 (2012).10.1063/1.4724100 ↗
5. H. Guan, G. Chen, S. Zhang, and Y. Wang, Mater. Chem. Phys. 124, 639 (2010).10.1016/j.matchemphys.2010.07.027 ↗
6. Z. Xie, D. Geng, X. Liu, and S. Ma, J. Mater. Sci. Technol. 27, 607 (2011).10.1016/S1005-0302(11)60115-1 ↗
7. C. Gong, J. Zhang, X. Zhang, L. Yu, P. Zhang, Z. Wu, and Z. Zhang, J. Phys. Chem. C 114, 10101 (2010).10.1021/jp100697x ↗
8. A. Csilk, K. Vad, E. Tóth-Kádár, and L. Péter, Electrochem. Commun. 11, 1289 (2009).10.1016/j.elecom.2009.04.027 ↗
9. Y. Duan, S. Gu, Z. Zhang, and M. Wen, J. Alloys Compd. 542, 90 (2012).10.1016/j.jallcom.2012.06.128 ↗
10. A.H. Bahrami, H. Ghayour, and S. Sharafi, Powder Technol. 249, 7 (2013).10.1016/j.powtec.2013.07.024 ↗
11. Z. Hua, W. Yu, Y. Sun, and S. Zhao, J. Alloys Compd. 505, 768 (2010).10.1016/j.jallcom.2010.06.138 ↗
12. J. Liu, T. Ma, T. Hui, W. Luo, and Y. Mi, J. Magn. Magn. Mater. 322, 940 (2010).10.1016/j.jmmm.2009.11.028 ↗
13. T.D. Zhou, J.K. Tang, and Z.Y. Wang, J. Magn. Magn. Mater. 322, 2589 (2010).10.1016/j.jmmm.2010.03.026 ↗
14. R. Koohkan, S. Sharafi, H. Shokrollahi, and K. Janghorban, J. Magn. Magn. Mater. 320, 1089 (2008).10.1016/j.jmmm.2007.10.033 ↗
15. Y.D. Kim, J.Y. Chung, J. Kim, and H. Jeon, Mater. Sci. Eng. A 291, 17 (2000).10.1016/S0921-5093(00)00982-5 ↗
16. X. Wang, R. Gong, P. Li, L. Liu, and W. Cheng, Mater. Sci. Eng. A 466, 178 (2007).10.1016/j.msea.2007.02.051 ↗
17. Z. Zhonglun, Z. Ji, D. Yuping, S. Gu, and G. Jingbo, J. Mater. Sci. Mater. Electron. 24, 968 (2013).10.1007/s10854-012-0859-6 ↗
18. H. Luo, F. Meng, Y. Cai, and W. Hong, J. Magn. Magn. Mater. 323, 2323 (2011).10.1016/j.jmmm.2011.04.015 ↗
19. R. Chater, M. Bououdina, D. Chaanbi, and H. Abbas, J. Solid State Chem. 201, 317 (2013).10.1016/j.jssc.2013.02.028 ↗
20. H.R. Madaah Hosseini and A. Bahrami, Mater. Sci. Eng. B 123, 74 (2005).10.1016/j.mseb.2005.07.013 ↗
21. C.N. Chinnasamy, A. Narayanasamy, N. Ponpandian, K. Chattopadhyay, and M. Saravanakumar, Mater. Sci. Eng A. 304–306, 408 (2001).10.1016/S0921-5093(00)01518-5 ↗
22. T.Y. Ma, M. Yan, and W. Wang, Scripta Mater. 58, 243 (2008).10.1016/j.scriptamat.2007.10.017 ↗
23. X. Wang, R.Z. Gong, H. Luo, and Z.K. Feng, J. Alloys Compd. 480, 761 (2009).10.1016/j.jallcom.2009.02.037 ↗
24. X. Wang, R.Z. Gong, X.C. Li, Y.F. He, L.Y. Liu, P.G. Li, and J. Mate, Sci. Mater. El. 18, 481 (2007).10.1007/s10854-006-9063-x ↗
25. R. Han, L. Qiao, T. Wang, and F.S. Li, J. Alloys Compd. 509, 2734 (2011).10.1016/j.jallcom.2010.11.074 ↗
26. W.Y. Zhou, Polym. Eng. Sci. 51, 917 (2011).10.1002/pen.21913 ↗
27. B.S. Zhang, G. Lu, Y. Feng, J. Xiong, and H.X. Lu, J. Magn. Magn. Mater. 299, 205 (2006).10.1016/j.jmmm.2005.04.003 ↗
28. Fusheng Wen, Fang Zhang, and Zhongyuan Liu, J. Phys. Chem. C 115, 14025 (2011).10.1021/jp202078p ↗
29. Xie Guozhi, Song Xiaolong, Zhang Baoshan, and Tang Dongming, Powder Technol. 210, 220 (2011).10.1016/j.powtec.2011.03.020 ↗
30. Duan Yuping, Zhang Yahong, Wang Tongmin, and Gu Shuchao, Mat. Sci. Eng B. 185, 86 (2014).10.1016/j.mseb.2014.02.014 ↗
31. C.J. Zheng, J.J. Li, N.Q. Zhao, and X.Q. Guo, Aerosp. Sci. Technol. 5, 1 (2004).