journal article·2020-12

A Thermistor with Variable Rate of Negative Temperature Coefficient of Resistance Made from Egyptian Raw Materials

R. M. Mahani, D. A. Abdel Aziz

Journal of Electronic Materials· Volume 49· Issue 12
Publisher page

Abstract

A dual-function negative temperature coefficient thermistor (NTCR/AB) has been successfully fabricated from the available and inexpensive Egyptian raw materials (clay and nepheline tailings). The disc-shaped thermistor was fabricated by grinding and mixing its raw material in a porcelain ball mill for 1 h, drying at 110°C for 1 h, pressing under 30 kN, drying at 110°C for 24 h, firing at 550°C, and finally sintering at 1200°C for 1 h. The crystalline phases developed in the ceramic thermistor were characterized by x-ray diffraction. The thermistor performance has been examined by measuring its electrical resistivity (ρ) over a wide range of temperature (− 100°C to + 200°C) at a constant frequency (0.1 Hz), using a broadband dielectric spectrometer. The fabricated ceramic thermistor showed a decrease in resistivity with increasing temperature at two different rates, displaying the NTCR/AB. One of its functions (NTCR/B) works in a wide temperature range (− 20°C to 200°C) and shows high thermistor constant values (3009–4638 K), while its second function (NTCR/A) works in a narrower temperature range (− 40°C to − 20°C) and shows exceptionally high thermistor constant values (40,122 K). NTCR/B can be used for many electronic devices applications, while NTCR/A is promising for thermal switching devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Advanced Sensor Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. X. Sun, H. Zhang, Y. Liu, J. Guo, and Z. Li, J. Adv. Ceram. 5, 329 (2016).10.1007/s40145-016-0206-0 ↗
2. O.S. Aleksić and P.M. Nikolić, Electron. Energ. 30, 267 (2017).
3. M. Schubert, C. Münch, S. Schuurman, V. Poulain, J. Kita, and R. Moos, Sensors 19(7), 1632 (2019).10.3390/s18113982 ↗
4. S.S. Munifah, Wiendartun, and A. Aminudin, J. Phys. Conf. Ser. 1280 (2019).10.1088/1742-6596/1280/2/022052 ↗
5. “NTC Thermistors”, Micro-chip Technologies, 2010. http://www.microchiptechno.com/ntc_thermistors.php. Accessed 5 Aug 2020.
6. “Thermistors”, EI Sensor Technologies, https://www.ei-sensor.com/thermistors/. Accessed 5 Aug 2020.
7. L.W. Turner, Electronics Engineer’s Reference Book, 4th ed. (Amsterdam: Elsevier, 1976), pp. 6–41.
8. D.R. White, Int. J. Therm. Phys. 36, 3404 (2015).10.1007/s10765-015-1968-2 ↗
9. D.A. Abdel Aziz and R.M. Mahani, Am. Ceram. Soc. Bull. 87, 9101 (2008).
10. D.A. Abdel Aziz, R.M. Mahani, D.M. Ibrahim, and M.H. Aly, Ind. Ceram. 30, 89 (2010).
11. R.M. Mahani and D.A. Abdel Aziz, IJAETCS 2, 1 (2015).
12. R.M. MahaniI, D.A. Abdel Aziz, and A.E. Reda, IJAETCS 3, 27 (2016).
13. A. Ezzeldin Reda, D.A. Abdel Aziz, and R. Mohamed Mahani, J. Phys. Sci. 28, 1 (2017).10.21315/jps2017.28.1.1 ↗
14. R.M. Mahani and S. Omara, Appl. Phys. A 125, 573 (2019).10.1007/s00339-019-2873-5 ↗
15. J. Nomoto, K. Inaba, M. Osada, S. Kobayashi, H. Makino, and T. Yamamoto, J. Appl. Phys. 120, 125302-1 (2016).10.1063/1.4962943 ↗
16. J. Nomoto, H. Makino, and T. Yamamoto, J. Appl. Phys. 117, 045304-1 (2015).10.1063/1.4906353 ↗
17. J. Nomoto, H. Makino, and T. Yamamoto, Nanoscale Res. Lett. 11, 320-1 (2016).10.1186/s11671-016-1535-1 ↗
18. J. Nomoto, H. Makino, and T. Yamamoto, Thin Solid Films 620, 2 (2016).10.1016/j.tsf.2016.07.078 ↗
19. J. Nomoto, K. Inaba, S. Kobayashi, H. Makino, and T. Yamamoto, J. Cryst. Growth 468, 645 (2017).10.1016/j.jcrysgro.2016.12.072 ↗
20. S.P. Chaudhuri and P. Sarkar, Ceram. Int. 26, 865 (2000).10.1016/S0272-8842(00)00029-8 ↗
21. M.D. Ingram, Phys. Chem. Glasses 28, 215 (1987).
22. D.W. Richerson, Modern Ceramic Engineering, 2nd ed., Vol. 47 (New York: Marcel Dekker, 1982).
23. R.A. Islam, Y.C. Chan, and M.F. Islam, Mater. Sci. Eng. B 106, 132 (2004).10.1016/j.mseb.2003.09.005 ↗
24. S.P. Chaudhuri, P. Sarkar, and A.K. Chakraborty, Ceram. Int. 25, 91 (1999).10.1016/S0272-8842(98)00006-6 ↗
25. A. Hasegawa, S. Fujitsu, K. Koumoto, and H. Yanagida, Jpn. J. Appl. Phys. 30, 1252 (1991).10.1143/JJAP.30.1252 ↗
26. S. Sahoo, S.K.S. Parashar, and S.M. Ali, J. Adv. Ceram. 3, 117 (2014).10.1007/s40145-014-0100-6 ↗
27. M.L. Singla, S. Sharma, and B. Raj, Sens. Actuators A 120, 337 (2005).10.1016/j.sna.2004.12.014 ↗
28. S. Jagtap, S. Rane, and S. Gosav, Microelectron. Eng. 87, 104 (2010).10.1016/j.mee.2009.05.026 ↗
29. S. Jagtap, S. Rane, and S. Gosavi, J. Eur. Ceram. Soc. 28, 2501 (2008).10.1016/j.jeurceramsoc.2008.03.027 ↗
30. E.D. Macklen, Thermistors (Ayr: Electrochemical Publications, 1979), p. 188.
31. T.G. Nenov and S.P. Yordanov, Ceramic Sensors, Technology, and Application (Lancaster: Technomic Publishing, 1996), pp. 134–145.
32. P.T. Lai, B. Li, and C.L. Chan, IEEE Electron. Device L 20, 589 (1999).10.1109/55.798053 ↗
33. Η.B. Sachse, Semi-conducting Temperature Sensors and Their Applications (New York: Wiley, 1975).
34. S.E. Dorris and T.O. Mason, J. Am. Ceram. Soc. 71, 379 (1988).10.1111/j.1151-2916.1988.tb05057.x ↗
35. O.S. Aleksic, M.V. Nikolic, and M.D. Lukovic, Sens. Actuators A 201, 371 (2013).10.1016/j.sna.2013.07.035 ↗
36. W. Luo, H.M. Yao, and P.H. Yang, J. Am. Ceram. Soc. 92, 2682 (2009).10.1111/j.1551-2916.2009.03289.x ↗
37. C. Zhao and Y. Zhao, J. Mater. Sci. Mater. Electron. 23, 1788 (2012).10.1007/s10854-012-0663-3 ↗
38. K. Park and J.K. Lee, J. Alloys Compd. 475, 513 (2009).10.1016/j.jallcom.2008.07.076 ↗
39. S. Jagtap, S. Rane, and U. Mulik, Microelectron. Int. 24, 7 (2007).10.1108/13565360710745539 ↗
40. S. Sahoo, U. Dash, and S.K.S. Parashar, J. Adv. Ceram. 2, 291 (2013).10.1007/s40145-013-0075-8 ↗