journal article·2020-05

Improved Extruded Thermoelectric Materials

M. G. Lavrentev, I. A. Drabkin, L. B. Ershova, M. P. Volkov

Journal of Electronic Materials· Volume 49· Issue 5
Publisher page

Abstract

Using improved extrusion technology for bismuth antimony tellurides, RMT has developed new extruded thermoelectric materials (TEM) with increased thermoelectric figure of merit (Z). The p-type materials exhibit maximum Z values of 3.28 × 10−3 K−1 to 3.32 × 10−3 K−1 in the electrical conductivity range from 900 Ω−1 cm−1 to 1100 Ω−1 cm−1. The corresponding Z values for the n-type materials lie in the similar range of 2.82 × 10−3 K−1 to 2.87 × 10−3 K−1. The wide variation of the electrical conductivity allows their application in miniature thermoelectric coolers (TEC) for cooling and temperature stabilization in the temperature range from 225 K to 350 K. Using the improved TEM, miniature TECs with pellet height of 0.3 mm were manufactured and tested; the test results showed that the maximum temperature difference was 2 K to 3 K higher while the energy consumption was 10% to 15% lower than for standard RMT miniature TEC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. E. Suhir, J. Appl. Mech. 53, 657 (1986).10.1115/1.3171827 ↗
2. E. Suhir and A. Shakouri, J. Appl. Mech. 79, 061010 (2012).10.1115/1.4006597 ↗
3. W.G. Pfann, Trans. AIME 194, 747 (1952).
4. P.W. Bridgman, Proc. Am. Acad. Arts Sci. 60, 305 (1925).10.2307/25130058 ↗
5. J. Yang, R. Chen, X. Fan, and W. Zhu, J. Alloys Compd. 429, 156 (2007).10.1016/j.jallcom.2006.04.030 ↗
6. Y. Sabo, J. Thermoelectr. 3, 52 (2005).
7. Y. Xiao, J. Yang, G. Li, and M. Liu, Intermetallics 50, 20 (2014).10.1016/j.intermet.2014.02.010 ↗
8. D. Vasilevskiy, M. Dawood, S. Turenne, and R. Masut, J. Electron. Mater. 38, 1061 (2009).10.1007/s11664-009-0695-5 ↗
9. M. Keshwarz, D. Vasilevskiy, R. Masut, and S. Turenne, J. Electron. Mater. 42, 1429 (2013).10.1007/s11664-012-2284-2 ↗
10. X. Liu, et al., Mater. Sci. Forum 534, 1549 (2007).10.4028/www.scientific.net/MSF.534-536.1549 ↗
11. L.D. Ivanova, L.I. Petrova, Y.V. Granatkina, and A.A. Melnikov, Inorg. Mater. 51, 741 (2015).10.1134/S0020168515070067 ↗
12. L.D. Ivanova, L.I. Petrova, Y.V. Granatkina, A.G. Malchev, and A.A. Melnikov, Inorg. Mater. 53, 50 (2017).10.1134/S0020168517010095 ↗
13. T.C. Harman, J. Appl. Phys. 29, 1373 (1959).10.1063/1.1723445 ↗
14. L.D. Ivanova and YuV Granatkina, Inorg. Mater. 36, 672–677 (2000).10.1007/BF02758419 ↗
15. O. V. Sokolov, S. Y. Skipidarov, N. I. Duvankova, G. G. Shabunina, in Proceedings of 5th European Conference on Thermoelectrics (Odessa, 2007)
16. V. N. Abrutin, I. A. Drabkin, L. B. Ershova, in Proceedings of 5th European Conference on Thermoelectrics (Odessa, 2007)
17. M.G. Lavrentev, V.B. Osvenskii, YuN Parkhomenko, L.P. Bulat, G.J. Snyder, and NYu Tabachkova, APL Mater. 4, 104807 (2016).10.1063/1.4953173 ↗
18. I.A. Drabkin, Optimization of Thermoelectric Cooling and Generator Batteries (Saarbrücken: LAP Lambert Academic, 2017).