journal article·2020-02

Enhanced Electrochemical Performance of Nanocellulose/PPy·CuCl2 Electrodes for All-Cellulose-Based Supercapacitors

Bruno N. Wesling, Gabriella M. V. Dias, Daliana Müller, Rafael Bento Serpa, Dachamir Hotza, Carlos R. Rambo

Journal of Electronic Materials· Volume 49· Issue 2
Publisher page

Abstract

Supercapacitive devices using a bacterial nanocellulose (BNC)-based separator and electrodes, providing mechanical support with high surface area while allowing the permeability of ions and avoiding short circuits, have been assembled and characterized. For the electrodes, BNC membranes were incorporated with polypyrrole (PPy) at different concentrations using copper chloride as oxidizing agent. As the separator, pure nanocellulose membranes were used. Scanning electron microscopy analysis revealed that increasing the pyrrole concentration from 0.04 mol/L to 0.08 mol/L and the molar ratio of oxidizing agent to monomer (CuCl2:Py) from 2:1 to 4:1 resulted in a uniform BNC coating. Symmetrical supercapacitor devices were assembled and subjected to cyclic voltammetry, charge–discharge measurements, and cycle stability testing. A maximum specific capacitance value of 1789 mF/cm2 was extracted from the voltammetry curves for the device constructed using the membrane with the highest Py concentration and oxidizing agent-to-monomer ratio. The best power density and energy density values obtained during discharge testing at 1 mA/cm2 were 5.47 mW/cm2 and 187 μWh/cm2, respectively. These promising results confirm the feasibility of using BNC as both the separator and electrodes when building supercapacitors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. S. Lehtimäki, M. Li, J. Salomaa, J. Pörhönen, A. Kalanti, S. Tuukkanen, P. Heljo, K. Halonen, and D. Lupo, Int. J. Electr. Power 58, 42 (2014).10.1016/j.ijepes.2014.01.004 ↗
2. M.A. Hannan, S. Mutashar, S.A. Samad, and A. Hussain, Biomed. Eng. Online 13, 79 (2014).10.1186/1475-925X-13-79 ↗
3. S. Zhang and N. Pan, Adv. Energy Mater. 5, 1401401 (2015).10.1002/aenm.201401401 ↗
4. G. Karthikeyan and C.K. Das, Macromol. Syst. 315, 98 (2012).10.1002/masy.201250512 ↗
5. M.J. Tadjer, M.A. Mastro, J.M. Rojo, A.B. Mojena, F. Calle, F.J. Kub, and C.R. Eddy, J. Electron. Mater. 43, 1188 (2014).10.1007/s11664-014-3047-z ↗
6. Q. Luo, P. Xu, Y. Qiu, Z. Cheng, X. Chang, and H. Fan, Mater. Lett. 198, 192 (2017).10.1016/j.matlet.2017.04.032 ↗
7. K.S. Ryu, Y.-G. Lee, Y.-S. Hong, Y.J. Park, X. Wu, K.M. Kim, M.G. Kang, N.-G. Park, and S.H. Chang, Electrochim. Acta 50, 843 (2004).10.1016/j.electacta.2004.02.055 ↗
8. G.A. Snook, P. Kao, and A.S. Best, J. Power Sources 196, 1 (2011).10.1016/j.jpowsour.2010.06.084 ↗
9. I.M.D.L.F. Salas, Y.N. Sudhakar, and M. Selvakumar, Appl. Surf. Sci. 296, 195 (2014).10.1016/j.apsusc.2014.01.080 ↗
10. S. Konwer, R. Boruah, and S.K. Dolui, J. Electron. Mater. 40, 2248 (2011).10.1007/s11664-011-1749-z ↗
11. W. Hu, S. Chen, Z. Yang, L. Liu, and H. Wang, J. Phys. Chem. B 115, 8453 (2011).10.1021/jp204422v ↗
12. C.R. Rambo, D.O.S. Recouvreux, C.A. Carminatti, A.K. Pitlovanciv, R.V. Antônio, and L.M. Porto, Mater. Sci. Eng. C 28, 549 (2008).10.1016/j.msec.2007.11.011 ↗
13. D. Muller, R. Cercená, A.J.G. Aguayo, L.M. Porto, C.R. Rambo, and G.M.O. Barra, J. Mater. Sci. Mater. Electron. 27, 8062 (2016).10.1007/s10854-016-4804-y ↗
14. D. Müller, J.S. Mandelli, J.A. Marins, B.G. Soares, L.M. Porto, C.R. Rambo, and G.M.O. Barra, Cellulose 19, 1645 (2012).10.1007/s10570-012-9754-9 ↗
15. L. Ma, R. Liu, H. Niu, L. Xing, L. Liu, and Y. Huang, ACS Appl. Mater. Interfaces 8, 33608 (2016).10.1021/acsami.6b11034 ↗
16. D. Müller, B.N. Wesling, G.M.V. Dias, J.C. Bernardes, L.M. Porto, C.R. Rambo, and D. Hotza, Adv. Mater. Sci. Eng. 8, 1 (2018).10.1155/2018/2314794 ↗
17. D. Muller, C.R. Rambo, L.M. Porto, W.H. Schreiner, and G.M.O. Barra, Carbohydr. Polym. 94, 655 (2013).10.1016/j.carbpol.2013.01.041 ↗
18. F. Wang, H.-J. Kim, S. Park, C.-D. Kee, S.-J. Kim, and I.-K. Oh, Compos. Sci. Technol. 128, 33 (2016).10.1016/j.compscitech.2016.03.012 ↗
19. D. Müller, C.R. Rambo, D.O.S. Recouvreux, L.M. Porto, and G.M.O. Barra, Synth. Met. 161, 106 (2011).10.1016/j.synthmet.2010.11.005 ↗
20. J. Ye, L. Guo, S. Zheng, Y. Feng, T. Zhang, Z. Yang, Q. Yuan, G. Shen, and Z. Zhang, Mater. Lett. 253, 372 (2019).10.1016/j.matlet.2019.06.096 ↗
21. Y. Chen, F. Wang, L. Dong, Z. Li, L. Chen, X. He, J. Gong, J. Zhang, and Q. Li, Polymers 11, 960 (2019).10.3390/polym11060960 ↗
22. S. Li, D. Huang, J. Yang, B. Zhang, X. Zhang, G. Yang, M. Wang, and Y. Shen, Nano Energy 9, 309 (2014).10.1016/j.nanoen.2014.08.004 ↗
23. J. Li, M. Cui, Y. Lai, Z. Zhang, H. Lu, J. Fang, and Y. Liu, Synth. Met. 160, 1228 (2010).10.1016/j.synthmet.2010.03.014 ↗
24. S. Dhibar, S. Sahoo, and C.K. Das, J. Appl. Polym. Sci. 130, 554 (2013).10.1002/app.39176 ↗
25. H.B. Li, M.H. Yu, F.X. Wang, P. Liu, Y. Liang, J. Xiao, C.X. Wang, Y.X. Tong, and G.W. Yang, Nat. Commun. 4, 1894 (2013).10.1038/ncomms2932 ↗
26. G. Jin, X. Xiao, S. Li, K. Zhao, Y. Wu, D. Sun, and F. Wang, Electrochim. Acta 178, 689 (2015).10.1016/j.electacta.2015.08.032 ↗
27. G. An, P. Yu, M. Xiao, Z. Liu, Z. Miao, K. Ding, and L. Mao, Nanotechnology 19, 2757709 (2008).
28. W. He, C. Wang, F. Zhuge, X. Deng, X. Xu, and T. Zhai, Nano Energy 35, 242 (2017).10.1016/j.nanoen.2017.03.045 ↗
29. S. Peng, L. Fan, C. Wei, X. Liu, H. Zhang, W. Xu, and J. Xu, Carbohydr. Polym. 157, 344 (2017).10.1016/j.carbpol.2016.10.004 ↗
30. C. Yang, L. Zhang, N. Hu, Z. Yang, H. Wei, and Y. Zhang, J. Power Sources 302, 39 (2016).10.1016/j.jpowsour.2015.10.035 ↗
31. K. Gao, Z. Shao, J. Li, X. Wang, X. Peng, W. Wang, and F. Wang, J. Mater. Chem. A 1, 63 (2013).10.1039/C2TA00386D ↗
32. S.M. Cha, S. Chandra Sekhar, R. Bhimanaboina, and J.S. Yu, Inorg. Chem. 57, 8440 (2018).10.1021/acs.inorgchem.8b01119 ↗