Enhancing the Thermoelectric Performance of Self-Defect TiNiSn: A First-Principles Calculation
Source abstract
Abstract
Carrier concentration is an important parameter for improving the thermoelectric (TE) properties of half-Heusler alloys, which can be achieved by defect engineering. In the present work, we studied the electronic structure and TE properties of TiNiSn with self-defects by using first-principles calculation. The self-defects include vacancies, substitutions, and interstitials, and all these systems were studied on the basis of defect formation energy. The stability of defect configurations showed that the Ni-vacancy (Ni-vac), Ti substitution at a Ni site (TiNi), Sn substitution at Ti and Ni sites (SnTi, SnNi), Ti-interstitial (Ti-int), and Ni-interstitial (Ni-int) are the most favorable defects. The self-defects were found to create an electron pocket in the density of states at the Fermi energy (DOS(EF)), except for the Ni-vac. Further, the electron concentration and specific heat were significantly increased by the self-defects. Ni-vac, TiNi, and SnNi showed a large power factor in comparison to pristine TiNiSn due to the high electrical conductivity. Ni-vac and SnNi showed a high TE performance in the intermediate and high temperature range, which would make them excellent TE candidates for a variety of applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. C. Fu, S. Bai, Y. Liu, Y. Tang, L. Chen, X. Zhao, and T. Zhu, Nat. Commun. 6, 8144 (2015).10.1038/ncomms9144 ↗
2. Z. Li, C. Xiao, H. Zhu, and Y. Xie, J. Am. Chem. Soc. 138, 14810 (2016).10.1021/jacs.6b08748 ↗
3. C.N. Savory, A.M. Ganose, and D.O. Scanlon, Chem. Mater. 29, 5156 (2017).10.1021/acs.chemmater.7b00628 ↗
4. G.Y. Yonggang, X. Zhang, and A. Zunger, Phys. Rev. B 95, 085201 (2017).10.1103/PhysRevB.95.085201 ↗
5. D.K. Aswal, R. Basu, and A. Singh, Energy Convers. Manag. 114, 50 (2016).10.1016/j.enconman.2016.01.065 ↗
6. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗
7. O. Eibl, K. Nielsch, N. Peranio, and F. Völklein, Thermoelectric Bi 2 Te 3 Nanomaterials (New York: Wiley, 2015).
8. H. Muta, T. Kanemitsu, K. Kurosaki, and S. Yamanaka, J. Alloys Compd. 469, 50 (2009).10.1016/j.jallcom.2008.02.041 ↗
9. S. Sakurada and N. Shutoh, Appl. Phys. Lett. 86, 082105 (2005).10.1063/1.1868063 ↗
10. G. Rogl, P. Sauerschnig, Z. Rykavets, V. Romaka, P. Heinrich, B. Hinterleitner, A. Grytsiv, E. Bauer, and P. Rogl, Acta Mater. 131, 336 (2017).10.1016/j.actamat.2017.03.071 ↗
11. H. Hazama, R. Asahi, M. Matsubara, and T. Takeuchi, J. Electron. Mater. 39, 1549 (2010).10.1007/s11664-010-1283-4 ↗
12. H. Hazama, M. Matsubara, R. Asahi, and T. Takeuchi, J. Appl. Phys. 110, 063710 (2011).10.1063/1.3633518 ↗
13. K. Kirievsky, Y. Gelbstein, and D. Fuks, J. Solid State Chem. 203, 247 (2013).10.1016/j.jssc.2013.04.032 ↗
14. J.E. Douglas, P.A. Chater, C.M. Brown, T.M. Pollock, and R. Seshadri, J. Appl. Phys. 116, 163514 (2014).10.1063/1.4900497 ↗
15. M. Wambach, R. Stern, S. Bhattacharya, P. Ziolkowski, E. Müller, G.K. Madsen, and A. Ludwig, Adv. Electron. Mater. 2, 1500208 (2016).10.1002/aelm.201500208 ↗
16. C.G. Van de Walle and J. Neugebauer, J. Appl. Phys. 95, 3851 (2004).10.1063/1.1682673 ↗
17. R.L. González-Romero and J.J. Meléndez, J. Alloys Compd. 732, 536 (2018).10.1016/j.jallcom.2017.10.196 ↗
18. C. Freysoldt, B. Grabowski, T. Hickel, J. Neugebauer, G. Kresse, A. Janotti, and C.G. Van de Walle, Rev. Mod. Phys. 86, 253 (2014).10.1103/RevModPhys.86.253 ↗
19. A.D. McNaught and A.D. McNaught, Compendium of Chemical Terminology (Oxford: Blackwell, 1997).
20. J. Buckeridge, D. Scanlon, A. Walsh, and C.R.A. Catlow, Comput. Phys. Commun. 185, 330 (2014).10.1016/j.cpc.2013.08.026 ↗
21. J.E. Douglas, C.S. Birkel, N. Verma, V.M. Miller, M.-S. Miao, G.D. Stucky, T.M. Pollock, and R. Seshadri, J. Appl. Phys. 115, 043720 (2014).10.1063/1.4862955 ↗
22. V. Romaka, P. Rogl, L. Romaka, Y. Stadnyk, N. Melnychenko, A. Grytsiv, M. Falmbigl, and N. Skryabina, J. Solid State Chem. 197, 103 (2013).10.1016/j.jssc.2012.08.023 ↗
23. A. Jain, S.P. Ong, G. Hautier, W. Chen, W.D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, and G. Ceder, APL Mater. 1, 011002 (2013).10.1063/1.4812323 ↗
24. G.K. Madsen and D.J. Singh, Comput. Phys. Commun. 175, 67 (2006).10.1016/j.cpc.2006.03.007 ↗
25. P. Hohenberg and W. Kohn, Phys. Rev. 136, B864 (1964).10.1103/PhysRev.136.B864 ↗
26. W. Kohn and L.J. Sham, Phys. Rev. 140, A1133 (1965).10.1103/PhysRev.140.A1133 ↗
27. P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G.L. Chiarotti, M. Cococcioni, and I. Dabo, J. Phys. Condens. Matter 21, 395502 (2009).10.1088/0953-8984/21/39/395502 ↗
28. P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M.B. Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, and M. Cococcioni, J. Phys. Condens. Matter 29, 465901 (2017).10.1088/1361-648X/aa8f79 ↗
29. T. Björkman, Comput. Phys. Commun. 182, 1183 (2011).10.1016/j.cpc.2011.01.013 ↗
30. J.P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).10.1103/PhysRevLett.77.3865 ↗
31. A.M. Rappe, K.M. Rabe, E. Kaxiras, and J. Joannopoulos, Phys. Rev. B 41, 1227 (1990).10.1103/PhysRevB.41.1227 ↗
32. C. Wang, S. Chen, J.-H. Yang, L. Lang, H.-J. Xiang, X.-G. Gong, A. Walsh, and S.-H. Wei, Chem. Mater. 26, 3411 (2014).10.1021/cm500598x ↗
33. L. Wang, L. Miao, Z. Wang, W. Wei, R. Xiong, H. Liu, J. Shi, and X. Tang, J. Appl. Phys. 105, 013709 (2009).10.1063/1.3056384 ↗
34. K.P. Ong, D.J. Singh, and P. Wu, Phys. Rev. B 83, 115110 (2011).10.1103/PhysRevB.83.115110 ↗
35. M. Rittiruam, T. Seetawan, S. Yokhasing, K. Matarat, P. Bach Thang, M. Kumar, and J.G. Han, Inorg. Chem. 55, 8822 (2016).10.1021/acs.inorgchem.6b01313 ↗
36. M. Rittiruam, A. Vora-Ud, W. Impho, and T. Seetawan, Integr. Ferroelectr. 165, 61 (2015).10.1080/10584587.2015.1062684 ↗