journal article·2018-01

Intermetallic Compound Growth and Stress Development in Al-Cu Diffusion Couple

M. Mishler, V. Ouvarov-Bancalero, Seung H. Chae, Luu Nguyen, Choong-Un Kim

Journal of Electronic Materials· Volume 47· Issue 1
Publisher page

Abstract

This paper reports experimental observations evidencing that the intermetallic compound phase interfaced with Cu in the Al-Cu diffusion couple is most likely α2-Cu3Al phase, not γ-Cu9Al4 phase as previously assumed, and that its growth to a critical thickness may result in interface failure by stress-driven fracture. These conclusions are made based on an interdiffusion study of a diffusion couple made of a thick Cu plate coated with ∼ 2-μm-thick Al thin film. The interface microstructure and lattice parameter were characterized using scanning electron microscopy and x-ray diffraction analysis. Specimens aged at temperature between 623 K (350°C) and 723 K (450°C) for various hours produced consistent results supporting the main conclusions. It is found that disordered α2-Cu3Al phase grows in a similar manner to solid-state epitaxy, probably owing to its structural similarity to the Cu lattice. The increase in the interface strain that accompanies the α2-Cu3Al phase growth ultimately leads to interface fracture proceeding from crack initiation and growth along the interface. This mechanism provides the most consistent explanation for interface failures observed in other studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A.E. Gershinskii, B.I. Fomin, E.I. Cherepov, and F.L. Edelman, Thin Solid Films 42, 269 (1977).10.1016/0040-6090(77)90362-5 ↗
2. S.U. Campisano, E. Costanzo, F. Scaccianoce, and R. Cristofolini, Thin Solid Films 52, 97 (1978).10.1016/0040-6090(78)90260-2 ↗
3. K. Rajan and E.R. Wallach, J. Cryst. Growth 49, 297 (1980).10.1016/0022-0248(80)90164-5 ↗
4. H.G. Jiang, J.Y. Dai, H.Y. Tong, B.Z. Ding, Q.H. Song, and Z.Q. Hu, J. Appl. Phys. 74, 6165 (1993).10.1063/1.355183 ↗
5. J.M. Vandenberg and R.A. Hamm, Thin Solid Films 97, 313 (1982).10.1016/0040-6090(82)90523-5 ↗
6. H.T. Hentzell, R.D. Thompson, and K.N. Tu, Mater. Lett. 2, 81 (1983).10.1016/0167-577X(83)90041-1 ↗
7. H.T. Hentzell, R.D. Thompson, and K.N. Tu, J. Appl. Phys. 54, 6923 (1983).10.1063/1.331999 ↗
8. F.A. Calvo, A. Ureng, J.G. De Salazar, and F. Molleda, J. Mater. Sci. 23, 2273 (1988).10.1007/BF01115800 ↗
9. C.Y. Chen and W.S. Hwang, Mater. Trans. 48, 1938 (2007).10.2320/matertrans.MER2006371 ↗
10. Y. Guo, G. Liu, H. Jin, Z. Shi, and G. Qiao, J. Mater. Sci. 46, 2467 (2011).10.1007/s10853-010-5093-0 ↗
11. C.J. Hang, C.Q. Wang, M. Mayer, Y.H. Tian, Y. Zhou, and H.H. Wang, Microelectron. Reliab. 48, 416 (2008).10.1016/j.microrel.2007.06.008 ↗
12. A. Markwitz, W. Matz, M. Waldschmidt, and G. Demortier, Surf. Interface Anal. 26, 160 (1998).10.1002/(SICI)1096-9918(199802)26:2<160::AID-SIA354>3.0.CO;2-M ↗
13. U. Gösele and K.N. Tu, J. Appl. Phys. 53, 3252 (1982).10.1063/1.331028 ↗
14. C.F. Yu, C.M. Chan, L.C. Chan, and K.C. Hsieh, Microelectron. Reliab. 51, 119 (2011).10.1016/j.microrel.2010.04.022 ↗
15. H.J. Kim, J.Y. Lee, K.W. Paik, K.W. Koh, J. Won, S. Choe, J. Lee, J.T. Moon, and Y.J. Park, IEEE Trans. Compon. Packag. Technol. 26, 367 (2003).10.1109/TCAPT.2003.815121 ↗
16. N. Ponweiser, C.L. Lengauer, and K.W. Richter, Intermetallics 19, 1737 (2011).10.1016/j.intermet.2011.07.007 ↗
17. J.L. Murray, Int. Met. Rev. 30, 211 (1985).10.1179/imr.1985.30.1.211 ↗
18. P. Riani, L. Arrighi, R. Marazza, D. Mazzone, G. Zanicchi, and R. Ferro, J. Phase Equilib. Diffus. 25, 22 (2004).10.1007/s11669-004-0169-7 ↗
19. D. Broddin, G. Van Tendeloo, J. Van Landuyt, S. Amelinckx, and M. De Graef, Philos. Mag. A 59, 979 (1989).10.1080/01418618908209832 ↗
20. N. Kuwano, T. Doi, and T. Eguchi, Jpn. Inst. Met. 18, 807 (1977).10.2320/matertrans1960.18.807 ↗
21. W. Gaudig and H. Warlimont, Acta Metall. 26, 709 (1978).10.1016/0001-6160(78)90022-6 ↗
22. Y.Y. Tan and F.K. Yong, In 17th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (2010), pp. 1–4.
23. H. Xu, C. Liu, V.V. Silberschmidt, S.S. Pramana, T.J. White, Z. Chen, and V.L. Acoff, Acta Mater. 59, 5661 (2011).10.1016/j.actamat.2011.05.041 ↗
24. J. Li, L. Liu, L. Deng, B. Ma, F. Wang, and L. Han, IEEE Electron Device Lett. 32, 1433 (2011).10.1109/LED.2011.2161749 ↗
25. L. England and T. Jiang, In 57th IEEE Electronic Components and Technology Conference (2007), pp. 1604–1613.
26. G.K. Williamson and W.H. Hall, Acta Metall. 1, 22 (1953).10.1016/0001-6160(53)90006-6 ↗
27. J. Chen, Y.S. Lai, Y.W. Wang, and C.R. Kao, Microelectron. Reliab. 51, 125 (2011).10.1016/j.microrel.2010.09.034 ↗
28. F. Haidara, M.C. Record, B. Duployer, and D. Mangelinck, Surf. Coat. Technol. 206, 3851 (2012).10.1016/j.surfcoat.2012.01.065 ↗
29. S. Tavassoli, M. Abbasi, and R. Tahavvori, Mater. Des. 108, 343 (2016).10.1016/j.matdes.2016.06.076 ↗