Simulations for the Development of Thermoelectric Measurements
Source abstract
Abstract
In thermoelectricity, continuum theoretical equations are usually used for the calculation of the characteristics and performance of thermoelectric elements, modules or devices as a function of external parameters (material, geometry, temperatures, current, flow, load, etc.). An increasing number of commercial software packages aimed at applications, such as COMSOL and ANSYS, contain vkernels using direct thermoelectric coupling. Application of these numerical tools also allows analysis of physical measurement conditions and can lead to specifically adapted methods for developing special test equipment required for the determination of TE material and module properties. System-theoretical and simulation-based considerations of favorable geometries are taken into account to create draft sketches in the development of such measurement systems. Particular consideration is given to the development of transient measurement methods, which have great advantages compared with the conventional static methods in terms of the measurement duration required. In this paper the benefits of using numerical tools in designing measurement facilities are shown using two examples. The first is the determination of geometric correction factors in four-point probe measurement of electrical conductivity, whereas the second example is focused on the so-called combined thermoelectric measurement (CTEM) system, where all thermoelectric material properties (Seebeck coefficient, electrical and thermal conductivity, and Harman measurement of zT) are measured in a combined way. Here, we want to highlight especially the measurement of thermal conductivity in a transient mode. Factors influencing the measurement results such as coupling to the environment due to radiation, heat losses via the mounting of the probe head, as well as contact resistance between the sample and sample holder are illustrated, analyzed, and discussed. By employing the results of the simulations, we have developed an improved sample head that allows for measurements over a larger temperature interval with enhanced accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. S.W. Angrist, Direct Energy Conversion (Boston: Allyn and Bacon, 1965)
2. G.W. Sutton (ed.), Direct Energy Conversion, Inter-University Electronics Series, Vol. 3 (New York: McGraw-Hill Book, 1966)
3. R. Decher, Direct Energy Conversion (Oxford: Oxford University Press, 1997).
4. L.I. Anatychuk, Physics of Thermoelectricity, Vol. 1 (Ukraine: Institute of Thermoelectricity, 1998)
5. G. Nolas, J. Sharp, and H. Goldsmid, Thermoelectrics: Basic Principles and New Materials Development, Springer Series in Material Science, Vol. 45 (Berlin: Springer, 2001)10.1007/978-3-662-04569-5 ↗
6. M.G. Kanatzidis, S. Mahanti, and T. Hogan, Chemistry, Physics and Materials Science of Thermoelectric Materials: Beyond Bismuth Telluride. Fundamental Materials Research (New York: Kluwer, 2003)10.1007/978-1-4419-9278-9 ↗
7. L. Anatychuk, Thermoelectric Power Converters, Vol. 2 (Kyiv-Chernivtsi, Ukraine: Institute of Thermoelectricity, 2003)
8. L.E. Bell, Science 321, 1457 (2008). doi: 10.1126/science.1158899 , http://www.sciencemag.org/cgi/content/abstract/321/5895/145710.1126/science.1158899 ↗
9. H.J. Goldsmid, Introduction to Thermoelectricity (New York: Springer, 2009)10.1007/978-3-642-00716-3 ↗
10. D.M. Rowe (ed.), CRC Handbook of Thermoelectrics (Boca Raton, FL: CRC Press, 1995).
11. D.M. Rowe (ed.), CRC Handbook of Thermoelectrics: Macro to Nano (Boca Raton, FL: CRC Press, 2006)
12. D.M. Rowe (ed.), Materials, Preparation, and Characterization in Thermoelectrics, Thermoelectrics and its energy harvesting, Vol. 1 (Boca Raton, FL: CRC Press, 2012).10.1201/b11891 ↗
13. D.M. Rowe (ed.), Moduls, Systems, and Applications in Thermoelectrics, Thermoelectrics and its Energy Harvesting, Vol. 2 (Boca Raton, FL: CRC Press, 2012)10.1201/b11892 ↗
14. J. Martin, T. Tritt, and C. Uher, J. Appl. Phys., 108, 121101 (2010). doi: 10.1063/1.350350510.1063/1.3503505 ↗
15. J. Martin, J. Res. Nat. Inst. Stand. Technol., 117, 168 (2012). doi: 10.6028/jres.117.00910.6028/jres.117.009 ↗
16. J. Martin, Rev. Sci. Instrum., 83, 065101 (2012)10.1063/1.4723872 ↗
17. J. de Boor, C. Stiewe, P. Ziolkowski, T. Dasgupta, G. Karpinski, E. Lenz, F. Edler, and E. Müller, J. Electron. Mater. (2013). doi: 10.1007/s11664-012-2404-z10.1007/s11664-012-2404-z ↗
18. E.E. Antonova and D.C. Looman, 24th International Conference on Thermoelectrics, 2005 - ICT 2005 (2005), pp. 215–218. doi: 10.1109/ICT.2005.151992210.1109/ICT.2005.1519922 ↗
19. M. Freunek, M. Müller, T. Ungan, W. Walker, and L.M. Reindl, J. Electron. Mater. 38, 1214 (2009). doi: 10.1007/s11664-009-0665-y , http://www.springerlink.com/content/n7g93r41u561138810.1007/s11664-009-0665-y ↗
20. D. Ebling, K. Bartholomé, M. Bartel, and M. Jägle, J. Electron. Mater. 39, 1376 (2010) doi: 10.1007/s11664-010-1331-010.1007/s11664-010-1331-0 ↗
21. P. Ziolkowski, P. Poinas, J. Leszczynski, G. Karpinski, and E. Müller, J. Electron. Mater. 39, 1934 (2010). doi: 10.1007/s11664-009-1048-010.1007/s11664-009-1048-0 ↗
22. E. Sandoz-Rosado and R. Stevens, J. Electron. Mater., 39, 1848 (2010) doi: 10.1007/s11664-010-1077-810.1007/s11664-010-1077-8 ↗
23. V.S.K.G. Kelekanjeri, Ph.D. thesis, Georgia Institute of Technology, School of Material Science and Engineering (2007)
24. V.S.K.G. Kelekanjeri and R.A. Gerhardt, Meas. Sci. Technol., 19, 025701 (2008). doi: 10.1088/0957-0233/9/2/025701
25. E.B. Hansen, Appl. Sci. Res. B 8, 93 (1960), doi: 10.1007/BF0292004710.1007/BF02920047 ↗
26. J. Jeans, The Mathematical Theory of Electricity and Magnetism (Cambridge: Cambridge University Press, 1908)10.5962/bhl.title.30487 ↗
27. L.B. Valdes, Proc. IRE, 40, 1429 (1952). doi: 10.1109/JRPROC.1952.27397510.1109/JRPROC.1952.273975 ↗
28. L.B. Valdes, Proc. Inst. Radio Eng., 42, 420 (1954)10.1109/JRPROC.1954.274680 ↗
29. A. Uhlir Jr., Bell Syst. Tech. J., 34, 105 (1955). http://www.alcatel-lucent.com/bstj/vol34-1955/articles/bstj34-1-105.pdf10.1002/j.1538-7305.1955.tb03765.x ↗
30. F.M. Smits, Bell Syst. Tech. J., 37, 711 (1958). http://www.alcatel-lucent.com/bstj/vol37-1958/articles/bstj37-3-711.pdf10.1002/j.1538-7305.1958.tb03883.x ↗
31. M. Yamashita, Meas. Sci. Technol., 17, 3323 (2006). doi: 10.1088/0957-0233/17/12/01910.1088/0957-0233/17/12/019 ↗
32. E.J. Zimney, G.H.B. Dommett, R.S. Ruoff, and D.A. Dikin, Meas. Sci. Technol., 18, 2067 (2007). doi: 10.1088/0957-0233/18/7/03710.1088/0957-0233/18/7/037 ↗
33. X. Huang, C. Gao, M. Li, C. He, A. Hao, D. Zhang, C. Yu, Y. Wang, C. Sang, X. Cui, and G. Zou, J. Appl. Phys., 101, 064904 (2007). doi: 10.1063/1.2712173 .10.1063/1.2712173 ↗
34. J. Yang, G. Peng, Y. Han, and C. Gao, AIP Adv. , 1, 032116 (2011)10.1063/1.3624474 ↗
35. N. Bowler, Meas. Sci. Technol., 22, 012001 (2011). doi: 10.1088/0957-0233/22/1/01200110.1088/0957-0233/22/1/012001 ↗
36. J. Náhlík, I. Kašpárková, and P. Fitl, Rev. Sci. Instrum. 83, 074701 (2012). doi: 10.1063/1.473165410.1063/1.4731654 ↗
37. K. Stecker and M. Teubner, Wissenschaftliche Zeitschrift der Universität Halle 16, 1 (1967)
38. M.A. Kaganov, Soviet Phys.-Techn. Phys., 3, 2169 (1958)
39. W.F.G. Swann, J. Franklin Inst., 267, 363 (1959). doi: 10.1016/0016-0032(59)90090-010.1016/0016-0032(59)90090-0 ↗
40. W.F.G. Swann, J. Franklin Inst., 268, 294 (1959). doi: 10.1016/0016-0032(59)90491-010.1016/0016-0032(59)90491-0 ↗