journal article·2014-06

Effect of Chemical Composition on the Thermoelectric Properties of n-Type Bi2Te3 Alloys Fabricated by Gas Atomization and Hot Extrusion

Babu Madavali, Hyo-Seob Kim, Soon-Jik Hong

Journal of Electronic Materials· Volume 43· Issue 6
Publisher page

Abstract

In this research, n-type (Bi2Te3)1−x(Bi2Se3)x-based thermoelectric (TE) materials were produced through a gas atomization process, and subsequently hot extruded with an extrusion ratio of 10:1 at 400 °C. The effect of chemical composition on TE properties was investigated. The microstructure of all extruded bars showed a homogeneous and fine distribution of grains due to the dynamic recrystallization during the hot extrusion process. With increasing Bi2Te3 content, from 0.85 to 0.90, both electrical resistivity and Seebeck coefficient values were increased. The maximum figure of merit (ZT) 0.673 was obtained at room temperature for (Bi2Te3)0.90(Bi2Se3)0.10 alloys due to them exhibiting higher seebeck coefficient and lower thermal conductivity than other compositions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. L.E. Bell, Science 321, 1457 (2008).10.1126/science.1158899 ↗
2. M.G. Kanatzidis, Chem. Mater. 22, 648 (2010).10.1021/cm902195j ↗
3. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗
4. V.B. Muñoz, L.E. Murr, D. Nemir, R. Lovrenich, E. Rubio, E.Y. Martinez, S.M. Gaytan, and M.I. Lopez, Mater. Charact. 59, 1258 (2008).10.1016/j.matchar.2007.10.009 ↗
5. M.S. Dresselhaus, Adv. Mater. 19, 1043 (2007).10.1002/adma.200600527 ↗
6. A.J. Minnich, M.S. Dresselhaus, Z.F. Ren, and G. Chen, Energy Environ. Sci. 2, 466 (2009).10.1039/b822664b ↗
7. X.B. Zhao, X.H. Ji, Y.H. Zhang, T.J. Zhy, J.P. Tu, and X.B. Zhang, Appl. Phys. Lett. 86, 062111 (2005).10.1063/1.1863440 ↗
8. S. Ganguly, C. Zhou, D. Morelli, J. Sakamoto, C. Uher, and S.L. Brock, J Solid State Chem 184, 3195 (2011).10.1016/j.jssc.2011.09.031 ↗
9. A. Saji and M. Elizabeth, Mater Chem 52, 253 (2004).
10. M.H. Bhuiyan, T.S. Kim, T.S. Koo, and S.J. Hong, J. Alloys Compd. 509, 1722 (2011).10.1016/j.jallcom.2010.10.021 ↗
11. A. Kanatzia, C.H. Papageorgiou, C.H. Lioutas, and T.H. Kyratsi, J. Electron. Mater. 42, 1652 (2012).10.1007/s11664-012-2362-5 ↗
12. J.Y. Yang, X.A. Fan, R.G. Chen, W. Zhu, S.Q. Bao, and X.K. Duan, J. Alloys Compd. 416, 270 (2006).10.1016/j.jallcom.2005.08.054 ↗
13. M. Babu, H.S. Kim, H.Y. Kim, and S.J. Hong, Pract. Metallogr. 50, 2 (2013).10.3139/147.110221 ↗
14. S. Fan, J. Zhao, J. Guo, Q. Yan, J. Ma, and H.H. Hng, Appl. Phys. Lett. 96, 182104 (2010).10.1063/1.3427427 ↗
15. M. Zhou, J. Li, and T. Kita, J. Am. Chem. Soc. 130, 4527 (2008).10.1021/ja7110652 ↗
16. Kavei and M.A. Karami, Bull. Mater. Sci. 29, 659 (2006).
17. D. Li, X.Y. Qin, Y.C. Dou, X.Y. Li, R.R. Sun, Q.Q. Wang, L.L. Li, H.X. Xin, N. Wang, N.N. Wang, C.J. Song, Y.F. Liu, and J. Zhang, Script. Mater. 67, 161 (2012).10.1016/j.scriptamat.2012.04.005 ↗
18. J.S. Son, M.K. Choi, M.K. Han, K. Park, J.Y. Kim, S.J. Lim, M. Oh, Y. Kuk, C. Park, S.J. Kim, and T. Hyeon, Nano Lett. 12, 640 (2012).10.1021/nl203389x ↗
19. S.J. Hong and B.S. Chun, Mater. Res. Bull. 38, 599 (2003).10.1016/S0025-5408(03)00022-9 ↗
20. N. Frangis, S. Kuypers, C. Manolikas, J.V. Landuyt, and S. Amelinckx, Solid State Commun. 69, 817 (1989).10.1016/0038-1098(89)90271-8 ↗
21. H.J. Goldsmid and A.W. Penn, Phys. Lett. 27A, 523 (1968).10.1016/0375-9601(68)90898-0 ↗