journal article·2014-10

Effect of High-Pressure Torsion on Texture, Microstructure, and Raman Spectroscopy: Case Study of Fe- and Te-Substituted CoSb3

R. Anbalagan, Gerda Rogl, Michael Zehetbauer, Amit Sharma, Peter Rogl, Satyam Suwas, Ramesh Chandra Mallik

Journal of Electronic Materials· Volume 43· Issue 10
Publisher page

Abstract

Fe0.05Co0.95Sb2.875Te0.125, a double-element-substituted skutterudite, was prepared by induction melting, annealing, and hot pressing (HP). The hot-pressed sample was subjected to high-pressure torsion (HPT) with 4 GPa pressure at 673 K. X-ray diffraction was performed before and after HPT processing of the sample; the skutterudite phase was observed as a main phase, but an additional impurity phase (CoSb2) was observed in the HPT-processed sample. Surface morphology was determined by high-resolution scanning electron microscopy. In the HP sample, coarse grains with sizes in the range of approximately 100 nm to 300 nm were obtained. They changed to fine grains with a reduction in grain size to 75 nm to 125 nm after HPT due to severe plastic deformation. Crystallographic texture, as measured by x-ray diffraction, indicated strengthening of (112), (102) poles and weakening of the (123) pole of the HPT-processed sample. Raman-active vibrational modes showed a peak position shift towards the lower energy side, indicating softening of the modes after HPT. The distortion of the rectangular Sb-Sb rings leads to broadening of Sb-Sb vibrational modes due to local strain fluctuation. In the HPT process, a significant effect on the shorter Sb-Sb bond was observed as compared with the longer Sb-Sb bond.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rare-earth and actinide compounds · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. M. Llunell, S. Alvarez, and P. Alemany, J. Chem. Soc. Dalton Trans. 1, 1195 (1998).10.1039/a708200b ↗
2. I. Oftedal, Z. Kristallogr. A 66, 517 (1928).10.1524/zkri.1928.66.1.517 ↗
3. J. Yang, Q. Hao, H. Wang, Y.C. Lan, Q.Y. He, A. Minnich, D.Z. Wang, A. Harriman, V.M. Varki, M.S. Dresselhaus, G. Chen, and Z.F. Ren, Phys. Rev. B 80, 115329 (2009).10.1103/PhysRevB.80.115329 ↗
4. L. Guo, X. Su, J.R. Salvador, and G.P. Meisner, Appl. Phys. Lett. 102, 111905 (2013).10.1063/1.4796121 ↗
5. S. Katsuyama, Y. Shichijo, M. Ito, K. Majima, and H. Nagai, J. Appl. Phys. 84, 6708 (1998).10.1063/1.369048 ↗
6. X. Su, H. Li, G. Wang, H. Chi, X. Zhou, X. Tang, Q. Zhang, and C. Uher, Chem. Mater. 23, 2948 (2011).10.1021/cm200560s ↗
7. R.C. Mallik, R. Anbalagan, G. Rogl, E. Royanian, P. Heinrich, E. Bauer, P. Rogl, and S. Suwas, Acta Mater. 61, 6698 (2013).10.1016/j.actamat.2013.07.032 ↗
8. H.D. Lutz and G. Kliche, Phys. Status Solidi (b) 112, 549 (1982).10.1002/pssb.2221120224 ↗
9. G.S. Nolas and C.A. Kendziora, Phys. Rev. B 59, 6189 (1999).10.1103/PhysRevB.59.6189 ↗
10. R.P. Hermann, R. Jin, W. Schwika, F. Grandjean, D. Mandrus, B.C. Sales, and G.J. Long, Phys. Rev. Lett. 90, 1 (2003).10.1103/PhysRevLett.90.135505 ↗
11. A.P. Zhilyaev and T.G. Langdon, Progr. Mater. Sci. 53, 893 (2008).10.1016/j.pmatsci.2008.03.002 ↗
12. G. Rogl, D. Setman, E. Schafler, J. Horky, M. Kerber, M. Zehetbauer, M. Falmbigl, P. Rogl, E. Royanian, and E. Bauer, Acta Mater. 60, 2146 (2012).10.1016/j.actamat.2011.12.023 ↗
13. G. Rogl, Z. Aabdin, E. Schafler, J. Horky, D. Setman, M. Zehetbauer, M. Kriegisch, A.G.O. Eibl, E. Bauer, M. Reinecker, W. Schranz, and P. Rogl, J. Alloys Compd. 537, 183 (2012).10.1016/j.jallcom.2012.05.011 ↗
14. G. Rogl, P. Rogl, E. Bauer, and M. Zehetbauer, Severe Plastic Deformation, a Tool to Enhance Thermoelectric Performance.Thermoelectric Nanomaterials, ed. K. Kuomoto and T. Mori (New York: Springer, 2013), pp. 193–254.10.1007/978-3-642-37537-8_10 ↗
15. L.D. Zhao, J. Sui, J. Li, H. Wu, and Y. Pei, Energy Environ. 6, 2916 (2013).10.1039/c3ee41859f ↗
16. J.J. Shen, L.P. Hu, T.J. Zhu, and X.B. Zhao, Appl. Phys. Lett. 99, 124102 (2011).10.1063/1.3643051 ↗
17. J.R. Carvajal, FULLPROF: A Program for Rietveld Refinement and Pattern Matching Analysis,Abstracts of the Satellite Meeting on Powder Diffraction of the XV Congress (International Union of Crystallography, Toulouse, France, 1990), p. 127.
18. V. Mote, Y. Purushotham, and B. Dole, J. Theor. Appl. Phys. 6, 6 (2012).10.1186/2251-7235-6-6 ↗
19. W.S. Liu, B.p. Zhang, J.F. Li, and L.D. Zhao, J. Phys. D 40, 556 (2007).10.1088/0022-3727/40/2/033 ↗
20. J. Feldman, D. Singh, C. Kendziora, D. Mandrus, and B. Sales, Phys. Rev. B 68, 94301 (2003).10.1103/PhysRevB.68.094301 ↗
21. G.S. Nolas, C.A. Kendziora, and H. Takizawa, J. Appl. Phys. 94, 7440 (2003).10.1063/1.1628377 ↗
22. N. Lazarevi, M.M. Radonji, R. Hu, D. Tanaskovi, C. Petrovic, and Z.V. Popovi, J. Phys. Condens. Matter 24, 135402 (2012).10.1088/0953-8984/24/13/135402 ↗
23. W.S. Liu, B.P. Zhang, L.D. Zhao, and J. Li, Chem. Mater. 20, 7526 (2008).10.1021/cm802367f ↗
24. R.K. Islamgaliev, R. Kuzel, E.D. Obraztsova, J. Burianek, F. Chmelik, and R.Z. Valiev, Mater. Sci. Eng. A 249, 152 (1998).10.1016/S0921-5093(98)00574-7 ↗
25. W. Cai, J. Mabon, and P. Bellon, Wear 267, 485 (2009).10.1016/j.wear.2008.11.016 ↗
26. C. Stiewe, Z. He, D. Platzek, E. Muller, S. Li, M. Toprak, and M. Muhammed, 25th International Conference on Thermoelectrics, ICT’06 (2006), pp. 678–680.
27. W.S. Liu, B.P. Zhang, J.F. Li, H.L. Zhang, and L.D. Zhao, J. Appl. Phys. 102, 103717 (2007).10.1063/1.2815671 ↗