Stress testing of a recrystallizing CaO-B2O3-SiO2 glass-ceramic with Ag electrodes for high frequency electronic packaging
Source abstract
Abstract
CaO−B2O3−SiO2 recrystallizing glass-ceramics are attractive for use in microelectronics packaging since they can be processed at low temperatures (<950°C) and the resultant material has a low loss tangent. This paper reports on the stability of the Ag electrodes with respect to electromigration. Planer multilayer recrystallizing glass-ceramic/Ag samples were prepared and fired at temperatures from 800–950°C. Buried capacitor structures with Ag plates 10 mm in diameter with a separation distance of 0.1 mm were created. These were stressed with voltages from 50 V to 3 kV at temperatures from 25°C to 200°C to induce failure. Failure modes observed ranged from increased, leakage to catastrophic events. A population was analyzed for mean time to failure characteristics. SEM and EDX were used to try to identify leakage paths and movement of the Ag through the glass ceramic. An activation energy was determined for the most common failure mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J. H. Alexander, S. K. Muralidhar, G. J. Roberts, and T. J. Vlach Proc. ISHM Int. Conf. Microelectronics (Reston, VA: ISHM, 1991).
2. T. Kawanobe and K. Otsuka (Paper presented at 32nd Electronic Components Conference, San Diego, CA, 1982).
3. F. M. D'Heurle, Metall. Trans. 2, 683 (1971).10.1007/BF02662722 ↗
4. L. Drozdyk, R. Getty, J. Hormadaly, C. Needes, and A. Mones (Paper presented at Int. Soc. for Hybrid Microelectronics, Boston, MA, 1994).
5. A. A. Shapiro, H. P. Lee, and M. L. Mecartney Dielectric Ceramic Materials (Westerville, OH: American Ceramic Society, 1999).
6. S. M. Sze, Physics of Semiconductor Devices, second ed. (New York: John Wiley & Sons, 1981).
7. J. A. Schwarz, VLSI Electron.: Microstructure Sci., Vol. 15 (New York: Academic Press, 1987), pp. 345–392.
8. P. Shewmon, Diffusion in Solids (Warrendale PA: TMS, 1989).
9. F. Skaupy, Deutsch. Phys. Gesell. 16, 157 (1914).
10. H. B. Huntington, Diffusion in Solids, Recent Developments, Materials Science and Technology, ed. A. S. Nowick and J. J. Burton New York: Academic Press, 1975), pp. 303–351.
11. J. R. Black (Paper presented at Third Int. Conf. Microelectronics, Munchen, Germany, 1968).
12. A. S. Nowick, Diffusion in Crystalline Solids (New York: Academic Press, 1984), pp. 143–188.10.1016/B978-0-12-522662-2.50008-X ↗
13. H. B. Huntington, and A. R. Grone, J. Phys. and Chem. of Solids 20, 76 (1961).10.1016/0022-3697(61)90138-X ↗
14. W. D. Kingery, H. K. Bowen, and D. R. Uhlmann, Introduction to Ceramics, second ed. New York: John Wiley & Sons, 1976).
15. L. Pauling, The Nature of the Chemical Bond, second ed. (Ithaca, NY: Cornell University Press, 1948).
16. P. H. Imamura, Engineering (Irvine, CA: University of California at Irvine, 1995), p. 99.
17. W. J. Bertram, VLSI Technol., second ed. ed. S. M. Sze, (New York: McGraw-Hill, 1988), pp. 612–655.
18. W. Weibull, J. Appl. Mech., 8, 293 (1951).10.1115/1.4010337 ↗
19. H. Eyring, S. Glasstones, and K. J. Laidler, The Theory of Rate Processes (New York: McGraw Hill, 1941).
20. A. T. English and C. M. Melliar-Smith, Ann. Rev. Mater. Sci. 18, 478 (1978).