Energy-Based Micromechanics Analysis on Fatigue Crack Propagation Behavior in Sn-Ag Eutectic Solder
Source abstract
Abstract
Sn-Ag-eutectic-based solders are replacing Sn-Pb eutectic solders in the electronics industry. The current paper extends the recently developed approach based on phase transformation theory, micromechanics, and fracture mechanics to treat fatigue crack nucleation and propagation for steels and alloys to predict fatigue crack propagation in solder alloys. To verify the proposed method, fatigue experiments were conducted on Sn-3.5Ag solder alloys. Finite element analysis is performed to predict the stress intensity factor range ΔK and the required energy U to increase the crack by a unit area. Unified creep-plasticity theory and a cohesive zone model are incorporated to predict the creep and hysteresis effects on fatigue crack propagation in solder and the interfacial behavior between the solder alloy and the intermetallic layer, respectively. With U determined numerically, the predicted fatigue crack propagation rate using phase transformation theory is compared with experimental data for Sn-3.5Ag and Sn-37Pb eutectic solders. Reasonable agreement between theoretical predictions and experimental results is obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. P.C. Paris, Fatigue Frac. Eng. Mater. Struct. 21, 535 (1998)10.1046/j.1460-2695.1998.00054.x ↗
2. L. Leicht, A. Skipor, Int. J. Microcircuits Electron. Pkg. 22, 57 (1999)
3. X. Liu, V.K. Sooklal, M.A. Verges, M.C. Larson, Microelectron. Reliability 46, 1128 (2006)10.1016/j.microrel.2005.09.011 ↗
4. P. Towashiraporn, G. Subbarayan, C.S. Desai, Int. J. Solids Struct. 42, 4468 (2005)10.1016/j.ijsolstr.2004.12.012 ↗
5. D. Shangguan, Solder. Surf. Mount Tech. 11, 27 (1999)10.1108/09540919910293847 ↗
6. D.R. Frear, J.W. Jang, J.K. Lin, C. Zhang, JOM 53, 28 (2001)10.1007/s11837-001-0099-3 ↗
7. D.H. Kim, P. Elenius, S. Barrett, IEEE Trans. EPM 25, 84 (2002)
8. A.F. Bower, D. Craft, Fatigue Frac. Eng. Mater. Struct. 21, 611 (1998)10.1046/j.1460-2695.1998.00057.x ↗
9. H.N. Hashemi, P. Yang, Int. J. Fatigue 23, 325 (2001)10.1016/S0142-1123(01)00144-X ↗
10. M. Erinc, P.J.G. Schreurs, G.Q. Zhang, M.G.D. Geers, J. Mater. Sci. 16, 700 (2005)
11. M.E. Fine, Scrip. Mater. 42, 1007 (2000)10.1016/S1359-6462(00)00319-5 ↗
12. P.B. Shrikant, M.E. Fine, Mater. Sci. Eng. A 314, 90 (2001)10.1016/S0921-5093(00)01918-3 ↗
13. P.K. Liaw, S.I. Kwun, M.E. Fine, Metal. Trans. A 12, 49 (1981)10.1007/BF02648507 ↗
14. J.K. Shang, Q.L. Zeng, L. Zhang, Q.S. Zhu, J. Mater. Sci. 18, 211 (2007)
15. C. Kanchanomai, Y. Mutoh, Fatigue Frac. Eng. Mater. Struct. 30, 443 (2007)10.1111/j.1460-2695.2006.01088.x ↗
16. Y. Yao, M.E. Fine, L.M. Keer, Int. J. Frac. FRAC799 2007 (in press and to be available online)
17. C. Kanchanomai, W. Limtrakarn, Y. Mutoh, Mech. Mater. 37, 1166 (2005)10.1016/j.mechmat.2005.02.002 ↗
18. ASTM: E647, ASTM Standards 03.01, 562 (1998)
19. T. Mura, Micromechanics of Defects in Solids, 2nd ed. (Netherlands: Martinus Nijhoff, 1991)
20. N.W. Klingbeil, Int. J. Fatigue 25, 117 (2003)10.1016/S0142-1123(02)00073-7 ↗
21. M.L. Benzeggagh, M. Kenane, Composites Sci. Tech. 56, 439 (1996)10.1016/0266-3538(96)00005-X ↗
22. D.L. McDowell, M.P. Miller, D.C. Brooks, Fatigue Electro. Mater. ASTM STP 1153, 42 (1994)10.1520/STP23915S ↗
23. S. Wen, L.M. Keer, H. Mavoori, J. Electron. Mater. 30, 1190 (2001)10.1007/s11664-001-0149-1 ↗
24. J. Lubliner, Int. J. Non-linear Mech. 7, 237 (1972)10.1016/0020-7462(72)90048-0 ↗
25. W. Prager, J. Appl. Mech., Trans. Am. Soc. Mech. Eng. 23, 493 (1956)10.1115/1.4011389 ↗
26. S. Wen (Ph.D. dissertation, Northwestern University, 2001)
27. F. Wang, L.M. Keer, S. Vaynman, S. Wen, IEEE Trans. CPT 27, 718 (2004)
28. S. Vaynman, S.A. McKeown, IEEE Trans. CHMT 16, 317 (1993)
29. S. Vaynman, A. Zubelewicz, Welding J. 69, 395 (1990)
30. H. Mavoori (Ph.D. dissertation, Northwestern University, 1996)
31. R. Darveaux, K. Banerji, IEEE Trans. CHMT 15, 1013 (1992)
32. NIST Database for Solder Properties, Release 4.0 (2002)