Nucleation and Growth of Cu-Al Intermetallics in Al-Modified Sn-Cu and Sn-Ag-Cu Lead-Free Solder Alloys
Source abstract
Abstract
Lead-free solder alloys Sn-Cu (SC) and Sn-Ag-Cu (SAC) are widely used by the microelectronics industry, but enhanced control of the microstructure is needed to improve solder performance. For such control, nucleation and stability of Cu-Al intermetallic compound (IMC) solidification catalysts were investigated by variation of the Cu (0.7–3.0 wt.%) and Al (0.0–0.4 wt.%) content of SC + Al and SAC + Al alloys, and of SAC + Al ball-grid array (BGA) solder joints. All of the Al-modified alloys produced Cu-Al IMC particles with different morphologies and phases (occasionally non-equilibrium phases). A trend of increasing Cu-Al IMC volume fraction with increasing Al content was established. Because of solidification of non-equilibrium phases in wire alloy structures, differential scanning calorimetry (DSC) experiments revealed delayed, non-equilibrium melting at high temperatures related to quenched-in Cu-Al phases; a final liquidus of 960–1200°C was recorded. During cooling from 1200°C, the DSC samples had the solidification behavior expected from thermodynamic equilibrium calculations. Solidification of the ternary alloys commenced with formation of ternary β and Cu-Al δ phases at 450–550°C; this was followed by β-Sn, and, finally, Cu6Sn5 and Cu-Al γ1. Because of the presence of the retained, high-temperature phases in the alloys, particle size and volume fraction of the room temperature Cu-Al IMC phases were observed to increase when the alloy casting temperature was reduced from 1200°C to 800°C, even though both temperatures are above the calculated liquidus temperature of the alloys. Preliminary electron backscatter diffraction results seemed to show Sn grain refinement in the SAC + Al BGA alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. I.E. Anderson, F.G. Yost, J.F. Smith, C.M. Miller, and R.L. Terpstra, U.S. Patent No. 5,527,628 (18 June 1996).
2. C.M. Miller, I.E. Anderson, and J.F. Smith, J. Electron. Mater. 23, 595 (1994).10.1007/BF02653344 ↗
3. K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker, J. Electron. Mater. 29, 1122 (2000).10.1007/s11664-000-0003-x ↗
4. R. Satoh, K. Arakawa, M. Harada, and K. Matsui, IEEE Trans. Compon. Hybrids Manuf. Technol. 14, 224 (1991).10.1109/33.76537 ↗
5. I.E. Anderson, J.C. Foley, B.A. Cook, J. Harringa, R.L. Terpstra, and O. Unal, J. Electron. Mater. 30, 1050 (2001).10.1007/s11664-001-0129-5 ↗
6. A. Kar, M. Ghosh, R.N. Ghosh, B.S. Majumdar, and A.K. Ray, Mater. Lett. 62, 151 (2008).10.1016/j.matlet.2007.04.116 ↗
7. J.W. Evans, D. Kwon, and J.Y. Evans, A Guide to Lead-Free Solders: Physical Metallurgy and Reliability, ed. W. Engelmaier (London: Springer, 2007),
8. K.N. Tu, A.M. Gusak, and M. Li, J. Appl. Phys. 93, 1335 (2003).10.1063/1.1517165 ↗
9. B.A. Cook, I.E. Anderson, J.L. Harringa, R.L. Terpstra, J.C. Foley, O. Unal, and F.C. Laabs, J. Electron. Mater. 30, 1214 (2001).10.1007/s11664-001-0152-6 ↗
10. P. Geng, J. ASTM Int. 7, 6 (2010).10.1520/JAI103044 ↗
11. Q.K. Zhang, Q.S. Zhu, H.F. Zou, and Z.F. Zhang, Mater. Sci. Eng. A 527, 1367 (2010).10.1016/j.msea.2009.10.040 ↗
12. E. George, M. Osterman, and M. Pecht, IEEE Trans. Device Mater. Reliab. 11, 328 (2011).10.1109/TDMR.2011.2134100 ↗
13. J. Sudelin, S. Nurmi, T. Lepisto, and E. Ristolainen, Mater. Sci. Eng. A 420, 55 (2006).10.1016/j.msea.2006.01.065 ↗
14. M. Abtew and G. Selvaduray, Mater. Sci. Eng. Rep. 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
15. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, E.J. Cotts, and B. Nandagopal, IEEE Trans. Compon. Packag. Technol. 31, 370 (2008).10.1109/TCAPT.2008.916835 ↗
16. D. Swenson, J. Mater. Sci. 18, 39 (2007).
17. N. Ponweiser, C.L. Lengauer, and K.W. Richter, Intermetallics 19, 1737 (2011).10.1016/j.intermet.2011.07.007 ↗
18. J.L. Murray, Int. Met. Rev. 30, 211 (1985).10.1179/imr.1985.30.1.211 ↗
19. A.J. Boesenberg, I.E. Anderson, and J.L. Harringa, J. Electron. Mater. 41, 1868 (2012).10.1007/s11664-012-1979-8 ↗
20. S.D. Mcdonald, K. Nogita, J. Read, T. Ventura, and T. Nishimura, J. Electron. Mater. 42, 256 (2013).10.1007/s11664-012-2222-3 ↗
21. K. Sweatman, T. Nishimura, S.D. McDonald, M. Whitewick, and K. Nogita, SMT Mag. 29, 30 (2014).
22. X.J. Liu, I. Ohnuma, R. Kainuma, and K. Ishida, J. Alloys Compd. 264, 201 (1998).10.1016/S0925-8388(97)00235-1 ↗
23. D. Mirkovic, J. Grobner, and R. Schmid-Fetzer, Mater. Sci. Eng. A 487, 456 (2008).10.1016/j.msea.2007.10.043 ↗
24. S. Furtauer, D. Li, D. Cupid, and H. Flandorfer, Intermetallics 34, 142 (2013).10.1016/j.intermet.2012.10.004 ↗
25. D. Li, P. Franke, S. Furtauer, D. Cupid, and H. Flandorfer, Intermetallics 34, 148 (2013).10.1016/j.intermet.2012.10.010 ↗
26. E.E. Underwood, Quantitative Stereology (Reading, MA: Addison Wesley Publishing Company, 1970).
27. Y.A. Chang, J.P. Neumann, A. Mikula, and D. Goldberg, Phase Diagr. Thermodyn. Prop. Ternary Copp. Met. Syst. 6, 233 (1979).
28. J.S.L. Leach and G.V. Raynor, Proc. R. Soc. Lond. Ser. A 224, 251 (1954).10.1098/rspa.1954.0155 ↗
29. J.S.L. Leach, J. Inst. Met. 92, 93 (1963/1964).
30. N. Saunders and A.P. Miodownik, Bull. Alloy Phase Diagr. 11, 278 (1990).10.1007/BF03029299 ↗
31. A.J. McAlister and D.J. Kahan, Bull. Alloy Phase Diagr. 4, 410 (1983).10.1007/BF02868095 ↗
32. P.R. Subramanian and J.H. Perepezko, J. Phase Equilib. 14, 62 (1993).10.1007/BF02652162 ↗
33. I. Karakaya and W.T. Thompson, Bull. Alloy Phase Diagr. 8, 340 (1987).10.1007/BF02869270 ↗
34. A.J. McAlister, Bull. Alloy Phase Diagr. 8, 526 (1987).10.1007/BF02879428 ↗
35. E.H. Kisi and J.D. Browne, Acta Crystallogr. Sect. B 47, 835 (1991).10.1107/S0108768191005694 ↗
36. L. Arnberg and S. Westman, Acta Crystallogr. Sect. A 43, 399 (1978).10.1107/S0567739478000807 ↗
37. K. Nogita, H. Yasuda, S.D. McDonald, and K. Uesugi, Adv. Mater. Res. 626, 200 (2013).10.4028/www.scientific.net/AMR.626.200 ↗
38. S.A. Belyakov and C.M. Gourlay, Acta Mater. 71, 56 (2014).10.1016/j.actamat.2014.02.044 ↗
39. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗
40. C.W. Chang, S.C. Yang, C. Tu, and C.R. Kao, J. Electron. Mater. 36, 1455 (2007).10.1007/s11664-007-0235-0 ↗
41. W.M. Chen, T.L. Yang, C.K. Chung, and C.R. Kao, Scr. Mater. 65, 331 (2011).10.1016/j.scriptamat.2011.04.034 ↗
42. K. Nogita, C.M. Gourlay, and T. Nishimura, J. Mater. 61, 45 (2009).
43. K. Nogita, Intermetallics 18, 145 (2010).10.1016/j.intermet.2009.07.005 ↗
44. K. Nogita, D. Mu, S.D. McDonald, J. Read, and Y.Q. Wu, Intermetallics 26, 78 (2012).10.1016/j.intermet.2012.03.047 ↗