journal article·2013-01

Low-Cycle Fatigue Behavior of 95.8Sn-3.5Ag-0.7Cu Solder Joints

Y. Tang, G.Y. Li, X.Q. Shi

Journal of Electronic Materials· Volume 42· Issue 1
Publisher page

Abstract

Low-cycle fatigue (LCF) behavior of 95.8Sn-3.5Ag-0.7Cu solder joints was investigated over a range of test temperatures (25°C, 75°C, and 125°C), frequencies (0.001 Hz, 0.01 Hz, and 0.1 Hz), and strain ranges (0.78%, 1.6%, and 3.1%). Effects of temperature and frequency on the LCF life were studied. Results show that the LCF lifetime decreases with an increase in test temperature or a decrease of test frequency, which is attributed to the longer exposure time to creep and the stress relaxation mechanism during fatigue testing. A modified Coffin–Manson model considering effects of temperature and frequency on the LCF life is proposed. The fatigue exponent and ductility coefficient were found to be influenced by both the temperature and frequency. By fitting the experimental data, the mathematical relations between the fatigue exponent and temperature, and ductility coefficient and temperature, were analyzed. Scanning electron microscopy (SEM) of the cross-sections and fracture surfaces of failed specimens at different temperature and frequency was applied to verify the failure mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. G.Y. Li, X.D. Bi, Q. Chen, and X.Q. Shi, J. Electron. Mater. 40, 165 (2011).10.1007/s11664-010-1441-8 ↗
2. G. Zeng, S. Xue, L. Zhang, L. Gao, W. Dai, and J. Luo, J. Mater. Sci. Mater. Electron. 21, 421 (2010).10.1007/s10854-010-0086-y ↗
3. Y.D. Han, H.Y. Jing, S.M.L. Nai, L.Y. Xu, and C.M. Tan, J. Electron. Mater. 39, 223 (2010).10.1007/s11664-009-0970-5 ↗
4. G.Y. Li, B.L. Chen, and J.N. Tey, IEEE Trans. Adv. Packag. 27, 77 (2004).
5. M.R. Harrison, J.H. Vincent, and A.A.H. Steen, Solder. Surf. Mt. Technol. 13, 21 (2001).10.1108/09540910110407388 ↗
6. T. Laurila, T. Mattila, V. Vuorinen, J. Karppinen, L. Li, M. Sippola, and J.K. Kivilahti, Microelectron. Reliab. 47, 1135 (2007).10.1016/j.microrel.2006.07.095 ↗
7. C. Kanchanomai and Y. Mutoh, Mater. Sci. Eng. A 381, 113 (2004).10.1016/j.msea.2004.04.018 ↗
8. C. Kanchanomai and Y. Mutoh, J. Electron. Mater. 33, 329 (2004).10.1007/s11664-004-0139-1 ↗
9. C. Kanchanomai, Y. M., and Y. Mutoh, J. Electron. Mater. 31, 456 (2002).10.1007/s11664-002-0100-0 ↗
10. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, J. Electron. Mater. 31, 142 (2002).10.1007/s11664-002-0161-0 ↗
11. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 1229 (1998).10.1007/s11664-998-0074-7 ↗
12. H.L. John, B.S. Pang, T.H. Xiong, and Low, Thin Solid Films 462–463, 408 (2004).
13. H.L. John, B.S. Pang, T.H. Xiong, and Tow, Int. J. Fatigue 26, 865 (2004).10.1016/j.ijfatigue.2003.12.004 ↗
14. Y. Kanda and Y. Kariya, J. Electron. Mater. 39, 238 (2010).10.1007/s11664-009-1003-0 ↗
15. Y. Kanda, Y. Kariya, and Y. Mochizuki, Mater. Trans. 49, 1524 (2008).10.2320/matertrans.MF200852 ↗
16. J. Liang, S. Downes, D. Shangguan, and S.M. Heinrich, J. Electron. Mater. 33, 1507 (2004).10.1007/s11664-004-0092-z ↗
17. ASTM Standards, ASTM E606, Standard Practice for Strain-Controlled Fatigue Testing, Vol. 03.01 (West Conshohocken, PA: The American Society for Testing and Materials, 1998).
18. C.K. Lin and C.M. Huang, J. Electron. Mater. 35, 292 (2006).10.1007/BF02692449 ↗
19. Y. Ding, C. Wang, and M. Li, J. Electron. Mater. 34, 1324 (2005).10.1007/s11664-005-0258-3 ↗
20. T.-M.K. Korhonen, L.P. Lehman, M.A. Korhonen, and D.W. Henderson, J. Electron. Mater. 36, 173 (2007).10.1007/s11664-006-0048-6 ↗
21. K.O. Lee, Yu Jin, T.S. Park, and S.B. Lee, J. Electron. Mater. 33, 249 (2004).10.1007/s11664-004-0130-x ↗
22. W.H. Kim and C. Laird, Acta Metall. 26, 777 (1978).10.1016/0001-6160(78)90028-7 ↗
23. J.H.L. Pang, D.Y.R. Chong, and T.H. Tow, IEEE Trans. Compon. Packag. Technol. 24, 705 (2001).10.1109/6144.974964 ↗
24. X.Q. Shi, H.L.J. Pang, W. Zhou, and Z.P. Wang, Int. J. Fatigue 22, 217 (2000).10.1016/S0142-1123(99)00124-3 ↗
25. X.P. Zhang, C.B. Yu, S. Shrestha, and L. Dorn, J. Mater. Sci. Mater. Electron. 18, 665 (2007).10.1007/s10854-006-9078-3 ↗
26. M. Amagai, Microelectron. Reliab. 39, 463 (1999).10.1016/S0026-2714(99)00017-7 ↗
27. C. Kanchanomai, Y. Miyashita, Y. Mutoh, and S.L. Mannan, Mater. Sci. Eng. A 345, 90 (2003).10.1016/S0921-5093(02)00461-6 ↗