An Ultrathin Microwave Metamaterial Absorber for C, X, and Ku Band Applications
Source abstract
Abstract
A five-band polarization-insensitive microwave metamaterial absorber (MMA) is discussed in this paper. The unit cell of the proposed MMA is composed of the top patch and a ground metallic plane, both separated by an FR4 dielectric substrate having an ultrathin thickness of 0.014 λ. The proposed absorber structure offers five different absorption peaks at 5.4 GHz (C band), 8.7 GHz (X band), 14.53 GHz, 15.25 GHz, and 15.68 GHz (Ku band) with the absorptivity of 98%, 86%, 99%, 99.8%, and 99.9%, respectively, for both transverse electric (TE) and transverse magnetic (TM) modes. The analysis of the electric field, magnetic field, polarization, and angle independency has been performed to understand the absorption mechanism easily. The sensing behavior of the structure is analyzed by adding the analyte over the top metal layer. The microwave MMA has been fabricated and measured. The fabrication results agree with the simulation results. The design of the proposed absorber is expected to find application in explosive detection, sensing, defense, and airborne radar applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metamaterials and Metasurfaces Applications · Advanced Antenna and Metasurface Technologies · Antenna Design and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. D.R. Smith, W.J. Padilla, and D.C. Vier, Composite medium with simultaneously negative permeability and permittivity Phys. Rev. Lett. 84, 4184 (2000).10.1103/PhysRevLett.84.4184 ↗
2. J.B. Pendry, Negative Refraction makes a Perfect Lens Phys. Rev. Lett. 85, 3966 (2000).10.1103/PhysRevLett.85.3966 ↗
3. N.I. Landy, S. Sajuyigbe, J.J. Mock, D.R. Smith, and W. Padilla, Perfect metamaterial absorber Phys. Rev. Lett. 100, 207402 (2008).10.1103/PhysRevLett.100.207402 ↗
4. S. Jamilan, M.N. Azarmanesh, and D. Zari, Design and characterization of a dual-band metamaterial absorber based on destructive interferences Prog. Electromag. Res. C. 47, 95 (2014).10.2528/PIERC13121307 ↗
5. B.X. Wang, X. Zhai, G.Z. Wang, W.Q. Huang, and L.L. Wang, A novel dual-band terahertz metamaterial absorber for a sensor application J. Appl. Phys. 117, 014504 (2015).10.1063/1.4905261 ↗
6. S. Ji, Z. Luo, J. Zhao, H. Dai, and C. Jiang, Design and analysis of an ultra-thin polarization-insensitive wide-angle triple-band metamaterial absorber for X-band application Opt. Quant. Electron. 53, 148 (2021).10.1007/s11082-021-02760-y ↗
7. R.M.H. Bilal, M.A. Naveed, M.A. Baqir, M.M. Ali, and D.A.A. Rahim, Design of a wideband terahertz metamaterial absorber based on Pythagorean-tree fractal geometry Opt. Mater. Express 10, 3007 (2020).10.1364/OME.409677 ↗
8. K. Kumari, N. Mishra, and R.K. Chaudhary, An ultra-thin compact polarization insensitive dual band absorber based on metamaterial for X-band applications, 5Microw Opt. Technol. Lett. 9, 2664 (2017).10.1002/mop.30797 ↗
9. P. Jain, A.K. Singh, J.K. Pandey, S. Bansal, N. Sardana, S. Kumar, N. Gupta, and A.K. Singh, An ultrathin compact polarization-sensitive triple-band microwave metamaterial absorber J. Electron. Mater 50, 1506–1513 (2021).10.1007/s11664-020-08680-z ↗
10. M. Kaur, and H.S. Singh, Design and analysis of a compact ultrathin polarization- and incident angle-independent triple band metamaterial absorber Microw. Opt. Technol. Lett 62, 1920 (2020).10.1002/mop.32264 ↗
11. A.M. Tamim, M.R. Faruque, J. Alam, S. Islam, and M. Islam, Split ring resonator loaded horizontally inverse double L-shaped metamaterial for C-, X- and Ku-band microwave applications Results Phys. 12, 2112 (2019).10.1016/j.rinp.2019.02.033 ↗
12. K. Muthukrishnan, and V. Narasimhan, An ultra-thin triple-band polarization-independent wide-angle microwave metamaterial absorber Plasmonics 14, 1983 (2019).10.1007/s11468-019-00985-y ↗
13. T. Ramachandran, M.R.I. Faruque, and M.T. Islam, Symmetric square shaped metamaterial structure with quintuple resonance frequencies for S, C, X and Ku band applications Sci. Rep. 11, 4270 (2021).10.1038/s41598-021-83715-x ↗
14. A.S. Dhillon, D. Mittal, and R. Bargota, Triple band ultrathin polarization insensitive metamaterial absorber for defense, explosive detection and airborne radar applications Microw. Opt. Technol. Lett. 61, 89 (2018).
15. L.D. Hai, V.D. Qui, N.H. Tung, T. van Huynh, N.D. Dung, N.T. Binh, L.D. Tuyen, and V.D. Lam, Conductive polymer for ultra-broadband, wide-angle, and polarization-insensitivemetamaterial perfect absorber Opt. Express. 26, 33253 (2018).10.1364/OE.26.033253 ↗
16. K. Al-badri, Very high Q-factor based on G-shaped resonator type metamaterial absorber Ibn AL- Haitham J. Pure Appl. Sci. 160, 159–166 (2018).
17. R. Yahiaoui, S. Tan, L. Cong, R. Singh, F. Yan, and W. Zhang, Multispectral terahertz sensing with highly flexible ultrathin metamaterial absorber J Appl. Phys. 118, 083103 (2015).10.1063/1.4929449 ↗
18. Y.L. Liao, and Y. Zhao, Ultra-narrowband dielectric metamaterial absorber with ultra-sparse nanowire grids for sensing applications Sci. Rep. 10, 1480 (2020).10.1038/s41598-020-58456-y ↗
19. C. Yongzhi, Z. Yao, L. Hui, C. Fu, and M. Xuesong, Compact ultra-thin seven-band microwave metamaterial absorber based on a single resonator structure J Electron Mater. 48, 3939–3946 (2019).10.1007/s11664-019-07156-z ↗
20. C. Yongzhi, L. Hui, and C. Fu, Broadband metamaterial microwave absorber based on asymmetric sectional resonator structures J. Appl. Phys. 127, 214902 (2020).10.1063/5.0002931 ↗
21. Q. Wang, and Y. Cheng, Compact and low-frequency broadband microwave metamaterial absorber based on meander wire structure loaded resistors Int. J. Electron. Commun. (AEÜ) 120, 153198 (2020).10.1016/j.aeue.2020.153198 ↗
22. H. Zhang, Y. Cheng, and F. Chen, Quad-band plasmonic perfect absorber using all-metal nanostructure metasurface for refractive index sensing Optik 229, 166300 (2021).10.1016/j.ijleo.2021.166300 ↗
23. Y. Cheng, F. Chen, and H. Luo, Plasmonic Chiral Metasurface Absorber Based on Bilayer Fourfold Twisted Semicircle Nanostructure at Optical Frequency Nanoscale Res Lett. 16, 12 (2021).10.1186/s11671-021-03474-6 ↗
24. D. Guangwu, S. Jacob, Z. Xiaoguang, Z. Jingdi, R.D. Averitt, and Z. Xin, Analysis of the thickness dependence of metamaterial absorbers at terahertz frequencies Opt. Exp. 26, 2242 (2018).10.1364/OE.26.002242 ↗
25. A. Sharma, R. Panwar, and R. Khanna, Experimental validation of a frequency-selective surface-loaded hybrid metamaterial absorber with wide bandwidth IEEE Magn. Lett. 10, 1 (2019).10.1109/LMAG.2019.2898612 ↗
26. S. Chejarla, S.R. Thummaluru, and R.K. Chaudhary, Flexible metamaterial absorber with wide incident angle insensitivity for conformal applications Elect Lett. 55, 133 (2019).
27. P. Jain, A.K. Singh, J.K. Pandey, S. Garg, S. Bansal, M. Agarwal, S. Kumar, N. Sardana, N. Gupta, and A.K. Singh, Ultra-thin metamaterial perfect absorbers for single-/dual-/multi-band microwave applications IET Microw. Antenna P 14, 390 (2020).10.1049/iet-map.2019.0623 ↗
28. D. Borah, N.S. Bhattacharyya. Design, fabrication and characterization of flexible and ultrathin microwave metamaterial absorber. In 2017 International Conference on Innovations in Electronics, Signal Processing and Communication (IESC), pp. 190-193, (2017).10.1109/IESPC.2017.8071890 ↗
29. O.B. Ayop, M.K. Rahim, N.A. Abd, N.A. Murad, and R. Samsuri, Triple band circular ring-shaped metamaterial absorber for X-Band applications Prog. Electromag. Res. 39, 65 (2014).10.2528/PIERM14052402 ↗