journal article·2020-12

Laser-Induced Hematite/Magnetite Phase Transformation

N. M. Ferreira, M. C. Ferro, G. Gaspar, A. J. S. Fernandes, M. A. Valente, F. M. Costa

Journal of Electronic Materials· Volume 49· Issue 12
Publisher page

Abstract

The goal of this work was to demonstrate the viability of using laser irradiation to promote the development of a magnetite/hematite bi-layer structure. Local heating by laser irradiation induces a hematite redox mechanism, promoting a phase transition of hematite (Fe2O3) into magnetite (Fe3O4). A relationship between laser feed rate, laser power and the top layer grain size was established. The average grain size increased from 3 μm to 10 μm when the laser power increased from 50 W to 100 W. Raman spectroscopy results demonstrated that residual hematite coexists on the magnetite top layer, distributed mostly along the grain boundaries. Electrical conductivity measurements of the irradiated regions confirmed the effectiveness of the laser surface treatment in promoting the local phase transformation of hematite into magnetite, with consequent enhancement of electrical conductivity. The maximum conductivity, 2.8 mS/m, was thus reached for the highest laser power used, 100 W. This phase transformation can be used on other materials to produce bi-layer structure, presenting an important factor for future applications and development using this technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Iron oxide chemistry and applications · Minerals Flotation and Separation Techniques · Clay minerals and soil interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. N.M. Ferreira, A.V. Kovalevsky, M.A. Valente, F.M. Costa, and J. Frade, Appl. Surf. Sci. 278, 203 (2013). https://doi.org/10.1016/j.apsusc.2013.01.108.10.1016/j.apsusc.2013.01.108 ↗
2. G.S. Parkinson, Surface Sci. Rep. 71, 272 (2016). https://doi.org/10.1016/j.surfrep.2016.02.001.10.1016/j.surfrep.2016.02.001 ↗
3. L.V. García-Quiñonez, M.I. Mendivil-Palma, T.K. DasRoy, G.A. Castillo-Rodríguez, C. Gómez-Rodríguez, D. Fernández-González, and S. Shaji, Ceram. Int. 46, 7850 (2020). https://doi.org/10.1016/j.ceramint.2019.12.004.10.1016/j.ceramint.2019.12.004 ↗
4. B. Feddes, A.M. Vredenberg, M. Wehner, J.C.G. Wolke, and J.A. Jansen, Biomaterials 26, 1645 (2005). https://doi.org/10.1016/j.biomaterials.2004.07.002.10.1016/j.biomaterials.2004.07.002 ↗
5. E.-S. Ghaith, T. Hayakawa, T. Kasuga, and M. Nogami, Mater. Lett. 60, 194 (2006). https://doi.org/10.1016/j.matlet.2005.08.030.10.1016/j.matlet.2005.08.030 ↗
6. P. Kevin, O’Flynn, Kenneth T. J. Non-Crystall.Solids 360, 49 (2013). https://doi.org/10.1016/j.jnoncrysol.2012.10.021.10.1016/j.jnoncrysol.2012.10.021 ↗
7. R.S. Silva, L.M. Jesus, T.C. Oliveira, D.V. Sampaio, J.C.A. Santos, and A.C. Hernandes, J. Eur. Ceram. Soc. 36, 4023 (2016). https://doi.org/10.1016/j.jeurceramsoc.2016.07.010.10.1016/j.jeurceramsoc.2016.07.010 ↗
8. T.H. Yi Kenneth, S. Pei-Chen, S. Chen-Nan, W. Jun, Effects of laser processing on nickel oxide – yttria stabilized zirconia, Proc. of the 2nd Intl. Conf. on Progress in Additive Manufacturing Edited by Chee Kai Chua, Wai Yee Yeong, Ming Jen Tan, Erjia Liuand Shu Beng Tor Copyright © 2016 by Pro-AM 2016 Organizers. Published by Research Publishing, Singapore ISSN: 2424-8967; https://doi.org//10.3850/2424-8967V02-206
9. N.M. Ferreira, M.C. Ferro, M.P.F. Graça, and F.M. Costa, Ceram. Int. 43, 2504 (2017). https://doi.org/10.1016/j.ceramint.2016.11.051.10.1016/j.ceramint.2016.11.051 ↗
10. A. Simchi and H. Pohl, Mater. Engi. 359, 119 (2003). https://doi.org/10.1016/s0921-5093(03)00341-1.10.1016/s0921-5093(03)00341-1 ↗
11. D. Dai and D. Gua, Appl. Surf. Sci. 355, 310 (2015). https://doi.org/10.1016/j.apsusc.2015.07.044.10.1016/j.apsusc.2015.07.044 ↗
12. S. Berretta, K.E. Evans, and O.R. Ghita, Mater. Des. 105, 301 (2016). https://doi.org/10.1016/j.matdes.2016.04.097.10.1016/j.matdes.2016.04.097 ↗
13. C. Lei, Z. Pan, C. Jianxiong, and P. Tu, Opt. Laser Technol. 106, 47 (2018). https://doi.org/10.1016/j.optlastec.2018.03.024.10.1016/j.optlastec.2018.03.024 ↗
14. E. Williams and N. Lavery, J. Mater. Process. Technol. (2017). https://doi.org/10.1016/j.jmatprotec.2017.03.034.10.1016/j.jmatprotec.2017.03.034 ↗
15. F.H. Alsultany, N.M. Ahmed, and M.Z. Matjafri, Soft Nanosci. Lett. 4, 83–89 (2014). https://doi.org/10.4236/snl.2014.44012.10.4236/snl.2014.44012 ↗
16. A. Danezana, G. Delaizira, N. Tessier-Doyenb, G. Gasgnierc, J.M. Gaillarda, P. Duporta, and B. Nait-Alia, J. Eur. Ceram. Soc. 38, 769 (2018). https://doi.org/10.1016/j.jeurceramsoc.2017.09.034.10.1016/j.jeurceramsoc.2017.09.034 ↗
17. L. Blaney, Paper 15, 5 (2007).
18. A.E. Maazouzi, R. Masrour, and A. Jabar, Phase Transit. 93, 733 (2020). https://doi.org/10.1080/01411594.2020.1771563.10.1080/01411594.2020.1771563 ↗
19. M. Nichterwitz, S. Honnali, J. Zehner, S. Schneider, D. Pohl, S. Schiemenz, S.T.B. Goennenwein, K. Nielsch, and K. Leistner, ACS Appl. Electron. Mater. 2, 2543 (2020). https://doi.org/10.1021/acsaelm.0c00448.10.1021/acsaelm.0c00448 ↗
20. C. Jiang, C.W. Leung, and P.W.T. Pong, Appl. Surf. Sci. 419, 692 (2017). https://doi.org/10.1016/j.apsusc.2017.05.116.10.1016/j.apsusc.2017.05.116 ↗
21. B. Song, S. Dong, Q. Liu, H. Liao, and C. Coddet, Mater. Des. 54, 727 (2014). https://doi.org/10.1016/j.matdes.2013.08.085.10.1016/j.matdes.2013.08.085 ↗
22. https://imagej.net/Welcome. Accessed November 2019
23. N.M. Ferreira, M.C. Ferro, M.A. Valente, J.R. Frade, F.M. Costa, and A.V. Kovalevsky, Dalton Trans. 47, 5646–5651 (2018). https://doi.org/10.1039/c7dt04775d.10.1039/c7dt04775d ↗
24. A. Simchi, Mater. Sci. Eng. A 428, 148 (2006). https://doi.org/10.1016/j.msea.2006.04.117.10.1016/j.msea.2006.04.117 ↗
25. A.G. Nasibulin, S. Rackauskas, H. Jiang, Y. Tian, P.R. Mudimela, S.D. Shandakov, L. Nasibulina, J. Sainio, and E.I. Kauppinen, Nano Res 2, 3799 (2009). https://doi.org/10.1007/s12274-009-9036-5.10.1007/s12274-009-9036-5 ↗
26. E. Fazio, M. Santoro, G. Lentini, D. Franco, S.P. Paolo Guglielmino, and F. Neri, Colloids Surf., A 490, 98 (2016). https://doi.org/10.1016/j.colsurfa.2015.11.034.10.1016/j.colsurfa.2015.11.034 ↗
27. O.N. Shebanova and P. Lazor, Raman study of magnetite (Fe3O4): laser-induced thermal effects and oxidation. J. Raman Spectrosc. 84, 5–852 (2003). https://doi.org/10.1002/jrs.1056.10.1002/jrs.1056 ↗
28. M. Testa-Anta, M.A. Ramos-Docampo, M. Comesãna-Hermo, B. Rivas-Murias, and V. Salgueiriño, Nanoscale Adv. 1, 2086 (2019). https://doi.org/10.1039/c9na00064j.10.1039/c9na00064j ↗
29. A. Simchi, Metall. Mater. Trans. B 35B, 937–948 (2004).10.1007/s11663-004-0088-3 ↗
30. M.M. Savalani, L. Hao, and R.A. Harris, Proc. Insti. Mech. Eng. Part B: J. Eng. Manuf. 220, 171 (2006). https://doi.org/10.1243/095440505X32986.10.1243/095440505X32986 ↗
31. A. Simchi, Mater. Lett. 62, 2840–2843 (2008). https://doi.org/10.1016/j.matlet.2008.01.113.10.1016/j.matlet.2008.01.113 ↗
32. M.V. Nikolić, N. Labus, and M.M. Ristić, Sci. Sinter. 37, 19 (2005).10.2298/SOS0501019N ↗
33. V.A. Hiremath and A. Venkataraman, Bull. Mater. Sci. 26, 391 (2003).10.1007/BF02711182 ↗