journal article·2020-10

Geometrical Structure Optimization Design of High-Performance Bi2Te3-Based Artificially Tilted Multilayer Thermoelectric Devices

Yuzheng Li, Ping Wei, Hongyu Zhou, Xin Mu, Wanting Zhu, Xiaolei Nie, Xiahan Sang, Wenyu Zhao

Journal of Electronic Materials· Volume 49· Issue 10
Publisher page

Abstract

Artificially tilted multilayer thermoelectric devices (ATMTDs) are a kind of thermoelectric device that can directly convert heat into electricity based on transverse thermoelectric effect. Although the devices have a simplified multilayer structure, their geometrical optimization is a complicated task. In this work, n-type Bi2Te2.7Se0.3 and p-type Bi0.1Sb1.9Te3 materials, which have the most important commercial applications in conventional thermoelectric devices, were selected as the component materials to assemble a promising high-performance Bi2Te3-based ATMTD. A numerical analysis method was employed to optimize the device length, device width, and thickness of the component materials. The results revealed that a large device width/length ratio, a small device aspect ratio, and a small thickness of component materials are favorable for achieving a high conversion efficiency. The temperature and charge distributions inside the ATMTD are studied based on finite element simulation. The nonuniform distribution of temperature field inside the device strongly depends on the thermal conductivity of component materials. The accumulation of a transverse electric field, accompanied with the cancellation of longitudinal electric field, is a consequence of different electric field distributions in the two component materials. This work provides a better understanding on the anisotropic electrical and thermal transport behaviors in transverse thermoelectric devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. J. He and T.M. Tritt, Science 357, eaak9997 (2017).10.1126/science.aak9997 ↗
2. W.Y. Zhao, Z.Y. Liu, Z.G. Sun, Q.J. Zhang, P. Wei, X. Mu, H.Y. Zhou, C.C. Li, S.F. Ma, D.Q. He, P.X. Ji, W.T. Zhu, X.L. Nie, X.L. Su, X.F. Tang, B.G. Shen, X.L. Dong, J.H. Yang, Y. Liu, and J. Shi, Nature 549, 247 (2017).10.1038/nature23667 ↗
3. C. Chang, M.H. Wu, D.S. He, Y.L. Pei, C.F. Wu, X.F. Wu, H.L. Yu, F.Y. Zhu, K.D. Wang, Y. Chen, L. Huang, J.F. Li, J.Q. He, and L.D. Zhao, Science 360, 778 (2018).10.1126/science.aaq1479 ↗
4. A. Rodríguez, J.G. Vián, D. Astrain, and A. Martínez, Energ. Convers. Manage. 50, 1236 (2009).
5. J. Yang and T. Caillat, MRS Bull. 31, 224 (2006).10.1557/mrs2006.49 ↗
6. T.H. Kil, S. Kim, D.H. Jeong, D.M. Geum, S. Lee, S.J. Jung, S. Kim, C. Park, J.S. Kim, J.M. Baik, K.S. Lee, C.Z. Kim, W.J. Choi, and S.H. Baek, Nano Energy 37, 242 (2017).10.1016/j.nanoen.2017.05.023 ↗
7. A. Majumdar, Nat. Nanotech. 4, 214 (2009).10.1038/nnano.2009.65 ↗
8. J.R. Sootsman, D.Y. Chung, and M.G. Kanatzidis, Angew. Chem. Int. Ed. Engl. 48, 8616 (2009).10.1002/anie.200900598 ↗
9. G.J. Tan, L.D. Zhao, and M.G. Kanatzidis, Chem. Rev. 116, 12123 (2016).10.1021/acs.chemrev.6b00255 ↗
10. T.J. Zhu, Y.T. Liu, C.G. Fu, J.P. Heremans, J.G. Snyder, and X.B. Zhao, Adv. Mater. 29, 1605884 (2017).10.1002/adma.201605884 ↗
11. Q.H. Zhang, X.Y. Huang, S.Q. Bai, X. Shi, C. Uher, and L.D. Chen, Adv. Eng. Mater. 18, 194 (2016).10.1002/adem.201500333 ↗
12. T. Zahner, C. Stoiber, E. Zepezauer, and H. Lengfellner, Int. J. Infrared. Milli. 20, 1103 (1999).10.1023/A:1021720422114 ↗
13. A. Kyarad and H. Lengfellner, Appl. Phys. Lett. 89, 192103 (2006).10.1063/1.2385213 ↗
14. C. Reitmajer, F. Walther, and H. Lengfellner, Appl. Phys. A 105, 347 (2011).10.1007/s00339-011-6590-y ↗
15. S.A. Ali and S. Mazumder, Int. J. Heat Mass Transf. 62, 373 (2013).10.1016/j.ijheatmasstransfer.2013.03.018 ↗
16. T. Kanno, K. Takahashi, A. Sakai, H. Tamaki, H. Kusada, and Y. Yamada, J. Electron. Mater. 43, 2072 (2014).10.1007/s11664-013-2959-3 ↗
17. T. Kanno, S. Yotsuhashi, A. Sakai, K. Takahashi, and H. Adachi, Appl. Phys. Lett. 96, 061917 (2009).10.1063/1.3081411 ↗
18. A. Kyarad and H. Lengfeller, Appl. Phys. Lett. 87, 182113 (2005).10.1063/1.2126111 ↗
19. H.J. Goldsmid, Materials 2, 903 (2009).10.3390/ma2030903 ↗
20. B.S. Qian and F. Ren, Energies 10, 1006 (2017).10.3390/en10071006 ↗
21. L.P. Hu, T.J. Zhu, X.H. Liu, and X.B. Zhao, Adv. Funct. Mater. 24, 5211 (2014).10.1002/adfm.201400474 ↗
22. H.J. Goldsmid, Introduction to Thermoelectricity (Berlin: Springer, 2016), pp. 1–7.10.1007/978-3-662-49256-7 ↗
23. X. Mu, W.T. Zhu, W.Y. Zhao, H.Y. Zhou, Z.G. Sun, C.C. Li, S.F. Ma, P. Wei, X.L. Nie, J.H. Yang, and Q.J. Zhang, Nano Energy 66, 104145 (2019).10.1016/j.nanoen.2019.104145 ↗
24. X. Mu, H.Y. Zhou, W.Y. Zhao, D.Q. He, W.T. Zhu, X.L. Nie, Z.G. Sun, and Q.J. Zhang, J. Power Sources 430, 193 (2019).10.1016/j.jpowsour.2019.04.109 ↗
25. A.F. Ioffe and A. Gelbtuch, Semiconductor Thermoelement and Thermoelectric Cooling (London: Infosearch Ltd, 1957).
26. E. Longo, C. Wiemer, R. Cecchini, M. Longo, A. Lamperti, A. Khanas, A. Zenkevich, M. Fanciulli, and R. Mantovan, J. Magn. Magn. Mater. 474, 632 (2019).10.1016/j.jmmm.2018.12.009 ↗
27. X.G. Guo, W.T. Zhu, L. Xing, X. Mu, C.C. Li, S.F. Ma, P. Wei, X.L. Nie, Q.J. Zhang, and W.Y. Zhao, J. Electron. Mater. 49, 2689 (2020).10.1007/s11664-019-07745-y ↗
28. P. Wei, B. Ke, L. Xing, C.C. Li, S.F. Ma, X.L. Nie, W.T. Zhu, X.H. Sang, Q.J. Zhang, G. Van Tendeloo, and W.Y. Zhao, Mater. Character. 163, 110240 (2020).10.1016/j.matchar.2020.110240 ↗