journal article·2020-02

Synthesis of Zinc Oxide Nanoparticles Through Hybrid Machining Process and Their Application in Supercapacitors

Harish Bishwakarma, Alok Kumar Das

Journal of Electronic Materials· Volume 49· Issue 2
Publisher page

Abstract

An electrochemical discharge machining process to produce zinc oxide (ZnO) nanoparticles (NPs) under varying voltage and duty factors has been investigated. The morphological and optical characterizations of the generated ZnO NPs were carried out. It was observed that the production rate of NPs and their size increased with an increase in voltage. The ZnO NPs produced at 120 V showed the maximum production rate larger NPs. The field-effect scanning electron microscope images of the NPs revealed a nanorod-like structure, large conical shape rods and hexagonal wurtzite-like structures. The ZnO NPs generated at 120 V and 20% duty factor presented less agglomeration of NPs compared to other NPs generated by varying electrical parameters. The crystal size of the ZnO NPs were found to vary from 31.08 nm to 50.37 nm. The ZnO NPs were also tested for use in a supercapacitor electrode, and the results showed that the specific capacitance of the electrode was 708.75 F/g at a current density of 1 A/g and a retained capacity of 90.42%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Supercapacitor Materials and Fabrication · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. S. Arya, P.K. Lehana, and B.S. Rana, J. Electron. Mater. 46, 4604 (2017).10.1007/s11664-017-5469-x ↗
2. A.K. Radzimska and T. Jesionowski, Materials 7, 2833 (2014).10.3390/ma7042833 ↗
3. S. Singhal, J. Kaur, T. Namgyal, and R. Sharma, Phys. B Condens. Matter 407, 1223 (2012).10.1016/j.physb.2012.01.103 ↗
4. M. Arakha, R. Jyoti, N.S. Parth, M. Bibekanand, and J. Suman, Free Radic. Biol. Med. 42, 110 (2017).
5. J. Song, J. Bian, E. Zheng, X. Wang, W. Tian, and T. Miyasaka, Chem. Lett. 44, 610 (2015).10.1246/cl.150056 ↗
6. J.L. Yang, S.J. An, W. Il Park, G.C. Yi, and W. Choi, Adv. Mater. 16, 1661 (2004).10.1002/adma.200306673 ↗
7. C. Wang, L. Yin, L. Zhang, D. Xiang, and R. Gao, Sensors 10, 2088 (2010).10.3390/s100302088 ↗
8. A. Tereshchenkoa, M. Bechelany, R. Viter, V. Khranovskyy, V. Smyntyna, N. Starodub, and R. Yakimova, Sens. Actuat. B. Chem. 229, 664 (2016).10.1016/j.snb.2016.01.099 ↗
9. K. Zeng, J. Li, Z. Zhang, M. Yan, Y. Liao, X. Zhang, and C. Zhao, J. Mater. Chem. B 3, 5249 (2015).10.1039/C5TB00486A ↗
10. J.X. Wang, X.W. Sun, A. Wei, Y. Lei, X.P. Cai, C.M. Li, and Z.L. Dong, Appl. Phys. Lett. 88, 233106 (2006).10.1063/1.2210078 ↗
11. S. Abdi and D. Dorranian, Opt. Laser Technol. 108, 372 (2018).10.1016/j.optlastec.2018.07.009 ↗
12. V.S. Burakov, N.A. Savastenko, N.V. Tarasenko, and E.A. Nevar, J. Appl. Spectrosc. 75, 114 (2008).10.1007/s10812-008-9003-z ↗
13. D. Ramimoghadam, S. Bagheri, and S.B.A. Hamid, J. Magn. Magn. Mater. 368, 207 (2014).10.1016/j.jmmm.2014.05.015 ↗
14. O.A. Yildirim and C. Durucan, J. Alloys Compd. 506, 944 (2010).10.1016/j.jallcom.2010.07.125 ↗
15. M. Guo, P. Diao, and S. Cai, Appl. Surf. Sci. 249, 71 (2005).10.1016/j.apsusc.2004.11.053 ↗
16. L. Li, S. Pu, Y. Liu, L. Zhao, J. Ma, and J. Li, Adv. Powder Technol. 29, 2194 (2018).10.1016/j.apt.2018.06.003 ↗
17. M.M. Ba-Abbad, A.A.H. Kadhum, A.B. Mohamad, M.S. Takriff, and K. Sopian, J. Alloys. Compd. 550, 63 (2013).10.1016/j.jallcom.2012.09.076 ↗
18. K. Minegishi, Y. Koiwai, Y. Kikuchi, K. Yano, M. Kasuga, and A. Shimizu, Jpn. J. Appl. Phys., Part 2 Lett. 36, 1453 (1997).10.1143/JJAP.36.L1453 ↗
19. A.J. Cheng, Y. Tzeng, Y. Zhou, M. Park, T.H. Wu, C. Shannon, D. Wang, and W. Lee, Appl. Phys. Lett. 92, 92113 (2008).10.1063/1.2889502 ↗
20. P.K. Singh, H. Bishwakarma, Shubham, and A.K. Das, J. Electron. Mater. 46, 5715 (2017).10.1007/s11664-017-5614-6 ↗
21. Y. Liu, X. Li, Y. Li, Z. Zhao, and F. Bai, Appl. Phys. A: Mater. Sci. Process. 122, 174 (2016).10.1007/s00339-016-9698-2 ↗
22. A. Ziashahabi, R. Poursalehi, and N. Naseri, Adv. Powder Technol. 29, 1246 (2018).10.1016/j.apt.2018.02.017 ↗
23. C.J. Li, X. Cao, W.H. Li, B.W. Zhang, L.Q. Xiao, X. Cao, W.H. Li, B.W. Zhang, and L.Q. Xiao, J. Alloys. Compd. 773, 762 (2018).10.1016/j.jallcom.2018.09.250 ↗
24. R.N. Yadav, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 233, 1037 (2019).10.1177/0954405418755825 ↗
25. N. Sabahi, M.R. Razfar, and M. Hajian, J. Mater. Process. Technol. 250, 190 (2017).10.1016/j.jmatprotec.2017.07.017 ↗
26. S.S. Kumar, P. Venkateswarlu, V.R. Rao, and G.N. Rao, Int. Nano Lett. 1, 30 (2013).10.1186/2228-5326-3-30 ↗
27. H.Y. Lu, S.Y. Chu, and S.S. Tan, J. Cryst. Growth 269, 385 (2004).10.1016/j.jcrysgro.2004.05.050 ↗
28. H. Sarma and K.C. Sarma, Int. J. Sci. Res. Publ. 4, 1 (2014).
29. P.K. Gupta, J.P. Bhamu, C.S. Rajoria, N.K. Lautre, and V. Agarwal, in MATEC Web Conf. vol 77 (2016).10.1051/matecconf/20167710004 ↗
30. B. Jiang, S. Lan, K. Wilt, and J. Ni, Int. J. Mach. Tool. Manuf. 90, 8 (2015).10.1016/j.ijmachtools.2014.11.006 ↗
31. C.P. Cheng, K.L. Wu, C.C. Mai, C.K. Yang, Y.S. Hsu, and B.H. Yan, Int. J. Mach. Tools Manuf. 50, 689 (2010).10.1016/j.ijmachtools.2010.04.012 ↗
32. A. Sarić, S. Goran, D. Goran, and G. Marijan, J. Alloys Compd. 652, 99 (2015).10.1016/j.jallcom.2015.08.200 ↗
33. R. Shama, A. Mumtaz, and S.K. Hasanain, J. Nanoparticle Res. 6, 2497 (2011).
34. S. Phoka, P. Laokul, E. Swatsitang, V. Promarak, S. Seraphin, and S. Maensiri, Mater. Chem. Phys. 115, 423 (2009).10.1016/j.matchemphys.2008.12.031 ↗
35. L.C. Nehru and C. Sanjeeviraja, J. Adv. Ceram. 3, 171 (2014).10.1007/s40145-014-0101-5 ↗
36. M.M. Hassan, W. Khan, A. Azam, and A.H. Naqvi, J. Lumin. 145, 160 (2014).10.1016/j.jlumin.2013.06.024 ↗
37. M.J. Chithra, M. Sathya, and K. Pushpanathan, Acta Metall. Sin.-Engl. 28, 394 (2015).10.1007/s40195-015-0218-8 ↗
38. A. De Adhikari, R. Oraon, S.K. Tiwari, N.K. Jena, J.H. Lee, N.H. Kim, and G.C. Nayak, Chem.—Asian J. 12, 900 (2017).10.1002/asia.201700124 ↗
39. P.K. Singh, A.K. Das, G. Hatui, and G.C. Nayak, Mater. Chem. Phys. 198, 16 (2017).10.1016/j.matchemphys.2017.04.070 ↗
40. R.S. Ray, B. Sarma, and M. Misra, Mater. Lett. 155, 102 (2015).10.1016/j.matlet.2015.04.010 ↗
41. X.Y. Liu, H. Chen, G. Li, J.H. Peng, and Y.X. Zhang, Ceram. Int. 42, 9227 (2016).10.1016/j.ceramint.2016.03.024 ↗