journal article·2017-11

Influence of Indium-Tin Oxide Additive on the Sintering Process and Conductivity of Na3Zr2Si2PO12 Solid Electrolyte

Dan Chen, Fa Luo, Lu Gao, Wancheng Zhou, Dongmei Zhu

Journal of Electronic Materials· Volume 46· Issue 11
Publisher page

Abstract

Because of the poor sintering ability and low phase purity limit in the application of a Na3Zr2Si2PO12 solid electrolyte, it is important to find an effective way to obtain a pure and dense Na3Zr2Si2PO12 ceramic at reduced temperature. In this study, high conductive indium-tin oxide (ITO) was innovatively used as the sintering additive to improve the purity and density of the Na3Zr2Si2PO12 ceramic. The influence of ITO additive on density, phase, microstructure and conductivity of the Na3Zr2Si2PO12 ceramic was investigated. Archimedes method, x-ray diffraction, scanning electron microcopy and complex impedance spectroscopy were used as experimental techniques to evaluate the effect of the additive. The results show that the ITO sintering additive increases not only the purity and density but also the conductivity of the Na3Zr2Si2PO12 ceramic. The Na3Zr2Si2PO12 ceramic with 3 wt.% ITO additive sintered at 1150°C for 4 h possesses a high density of 3.15 g/cm3 and good conductivity of (3.95 ± 0.12) × 10−4 S/cm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. V. Palomares, P. Serras, I. Villaluenga, K.B. Hueso, J. Carretero-González, and T. Rojo, Energy Environ. Sci. 5, 5884 (2012).10.1039/c2ee02781j ↗
2. J.W. Fergus, Solid State Ionics 227, 102 (2012).10.1016/j.ssi.2012.09.019 ↗
3. N. Yabuuchi, M. Kajiyama, J. Iwatate, H. Nishikawa, S. Hitomi, R. Okuyama, R. Ussi, Y. Yamada, and S. Komaba, Nat. Mater. 11, 512 (2012).10.1038/nmat3309 ↗
4. R.C.T. Slade, K.E. Young, and N. Bonanos, Solid State Ionics 46, 83 (1991).10.1016/0167-2738(91)90133-V ↗
5. R.O. Fuentes, F.M. Figueiredo, F.M.B. Marques, and J.I. Franco, Solid State Ionics 140, 173 (2001).10.1016/S0167-2738(01)00701-9 ↗
6. B.L. Ellis and L.F. Nazar, Curr. Opin. Solid State Mater. Sci. 16, 168 (2012).10.1016/j.cossms.2012.04.002 ↗
7. B.J. Mcentire, R.A. Bartlett, G.R. Miller, and R.S. Gordon, J. Am. Ceram. Soc. 66, 738 (1983).10.1111/j.1151-2916.1983.tb10541.x ↗
8. A. Ahmad, T.A. Wheat, A.K. Kuriakose, J.D. Canaday, and J.D. McDonald, Solid State Ionics 24, 89 (1987).10.1016/0167-2738(87)90070-1 ↗
9. R.S. Gordon, G.R. Miller, B.J. McEntire, E.D. Beck, and J.R. Rasmussen, Solid State Ionics 3–4, 243 (1981).10.1016/0167-2738(81)90091-6 ↗
10. H. Perthuis and P. Colomban, Mater. Res. Bull. 19, 621 (1984).10.1016/0025-5408(84)90130-2 ↗
11. M. Kotobuki and M. Koishi, Ceram. Int. 40, 5043 (2014).10.1016/j.ceramint.2013.09.009 ↗
12. S. Duluard, A. Paillassa, L. Puech, P. Vinatier, V. Turp, P. Rozier, P. Lenormand, P.L. Taberna, P. Simon, and F. Ansart, J. Eur. Ceram. Soc. 33, 1145 (2013).10.1016/j.jeurceramsoc.2012.08.005 ↗
13. M. Kotobuki, M. Koishi, and Y. Kato, Ionics 19, 1945 (2013).10.1007/s11581-013-1000-4 ↗
14. N.S. Bell, C. Edney, J.S. Wheeler, D. Ingersoll, and E.D. Spoerke, J. Am. Ceram. Soc. 97, 3744 (2014).10.1111/jace.13167 ↗
15. R.O. Fuentes, F.M. Figueiredo, F.M.B. Marques, and J.I. Franco, J. Eur. Ceram. Soc. 21, 737 (2001).10.1016/S0955-2219(00)00264-8 ↗
16. A. Ignaszak, P. Pasierb, R. Gajerski, and S. Komornicki, Thermochim. Acta 426, 7 (2005).10.1016/j.tca.2004.07.002 ↗
17. Z. Khakpour, Electrochim. Acta 196, 337 (2016).10.1016/j.electacta.2016.02.199 ↗
18. A.G. Jolley, G. Cohn, G.T. Hitz, and E.D. Wachsman, Ionics 21, 3031 (2015).10.1007/s11581-015-1498-8 ↗
19. P. Yadav and M.C. Bhatnagar, J. Electroceram. 30, 145 (2013).10.1007/s10832-012-9776-6 ↗
20. X.X. Xu, Z.Y. Wen, X.L. Yang, and L.D. Chen, Mater. Res. Bull. 43, 2334 (2008).10.1016/j.materresbull.2007.08.007 ↗
21. J.S. Lee, C.M. Chang, Y.I. Lee, J.H. Lee, and S.H. Hong, J. Am. Ceram. Soc. 87, 305 (2010).
22. D. Xu, K.H. Li, Y.J. Zhou, Y. Gao, D.T. Yan, and S.F. Xu, J. Eur. Ceram. Soc. 37, 419 (2017).10.1016/j.jeurceramsoc.2016.07.026 ↗
23. Y.T. Li, M.J. Liu, K. Liu, and C.A. Wang, J. Power Sources 240, 50 (2013).10.1016/j.jpowsour.2013.03.175 ↗
24. Y.S. Zhu, L.L. Li, C.Y. Li, L. Zhou, and Y.P. Wu, Solid State Ionics 289, 113 (2016).10.1016/j.ssi.2016.02.021 ↗