Microstructure Evolution and Protrusion of Electroplated Cu-Filled Through-Silicon Vias Subjected to Thermal Cyclic Loading
Source abstract
Abstract
Through-silicon vias (TSVs) have become an important technology for three-dimensional integrated circuit (3D IC) packaging. Protrusion of electroplated Cu-filled vias is a critical reliability issue for TSV technology. In this work, thermal cycling tests were carried out to identify how the microstructure affects protrusion during thermal cycling. Cu protrusion occurs when the loading temperature is higher than 149°C. During the first five thermal cycles, the grain size of Cu plays a dominant role in the protrusion behavior. Larger Cu grain size before thermal cycling results in greater Cu protrusion. With increasing thermal cycle number, the effect of the Cu grain size reduces and the microstrain begins to dominate the Cu protrusion behavior. Higher magnitude of microstrain within Cu results in greater protrusion increment during subsequent thermal cycles. When the thermal cycle number reaches 25, the protrusion rate of Cu slows down due to strain hardening. After 30 thermal cycles, the Cu protrusion stabilizes within the range of 1.92 μm to 2.09 μm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. J.H. Lau, Microelectron. Int. 28, 8 (2011).
2. O. Hanju, Z. Yue, Z. Li, S. May Gary, and S. Bakir Muhannad, Heat Transf. Eng. 37, 903 (2016).10.1080/01457632.2015.1097753 ↗
3. H.C. Chuang, Y.C. Teng, and J. Sanchez, Mater. Sci. Semicond. Process. 56, 5 (2016).10.1016/j.mssp.2016.07.016 ↗
4. W.S. Kwon, D.T. Alastair, K.H. Teo, S. Gao, T. Ueda, T. Ishigaki, K.T. Kang, and W.S. Yoo, Appl. Phys. Lett. 98, 232106.1 (2011).10.1063/1.3596443 ↗
5. S. Selvanayagam Cheryl, J.H. Lau, X.W. Zhang, S.K.W. Seah, K. Vaidyanathan, and T.C. Chai, IEEE Trans. Adv. Packag. 32, 720 (2009).10.1109/TADVP.2009.2021661 ↗
6. H. Kitada, T. Akamatsu, Y. Mizushima, T. Ishitsuka, and S. Sakuyama, in ECTC Conference Proceedings (2015), pp. 1840–1845.
7. J.P. Gambino, S.A. Adderly, and J.U. Knickerbocker, Microelectron. Eng. 135, 73 (2015).10.1016/j.mee.2014.10.019 ↗
8. L. Huang, Q. Deng, M. Li, X. Feng, and L. Gao, ECS J. Solid State Sci. Technol. 5, 389 (2016).10.1149/2.0091607jss ↗
9. N. Ranganathan, K. Prasad, N. Balasubramanian, and K. L. Pey, J. Micromech. Microeng. 18, 075018.1 (2008).10.1088/0960-1317/18/7/075018 ↗
10. W. Guo, A.P. Karmarkar, X. Xu, V.D.P. Geert, S.V. Huylen, M. Gonzalez, P. Absil, K.E. Sayed, and E. Beyne, in ECTC Conference Proceedings (2015), pp. 1038–1044.
11. P. Kumar, I. Dutta, and M.S. Bakir, J. Electron. Mater. 41, 322 (2011).10.1007/s11664-011-1726-6 ↗
12. I. Dutta, P. Kumar, and M.S. Bakir, JOM 63, 70 (2011).10.1007/s11837-011-0179-y ↗
13. Y. Zhang, G. Ding, H. Wang, and P. Cheng, J. Mater. Sci. Technol. 32, 355 (2016).10.1016/j.jmst.2015.09.008 ↗
14. Y.L. Shen, J. Appl. Phys. 93, 1806 (2003).10.1063/1.1535731 ↗
15. Y.B. Parka, R. Moniga, and C.A. Volkerta, Thin Solid Films 515, 3253 (2007).10.1016/j.tsf.2006.01.037 ↗
16. T.S. Park and S. Suresh, Acta Mater. 48, 3169 (2000).10.1016/S1359-6454(00)00114-2 ↗
17. T.F. Jiang, S.K. Ryu, J. Im, H.Y. Son, N.S. Kim, R. Huang, and P.S. Ho, in IITC Conference Proceedings (2013), pp. 6615584.1–6615584.3.10.1109/IITC.2013.6615584 ↗
18. J. Marro, C. Okoro, Y. Obeng, and K. Richardson, Microelectron. Reliab. 54, 2586 (2014).10.1016/j.microrel.2014.05.007 ↗
19. D. Zhang, K. Hummler, L. Smith, and J.J. Lu, in ECTC Conference Proceedings (2013), pp. 1407–1413.
20. JESD22-A104C. JEDEC Standard. 2005.
21. H.D. Merchant, M.G. Minor, and Y.L. Liu, J. Electron. Mater. 28, 998 (1999).10.1007/s11664-999-0176-x ↗
22. N. Pardis, C. Chen, R. Ebrahimi, L.S. Toth, C.F. Gu, B. Beausir, and L. Kommel, Mater. Sci. Eng. A 628, 423 (2015).10.1016/j.msea.2015.01.003 ↗
23. R. Halama, M. Sofer, and F. Fojtik, J. Eng. Mech. 19, 87 (2012).
24. W.F. Smith, and J. Hashemi, Foundations of materials science and engineering, 5th edn. (McGraw-Hill. 2007), pp. 118–120.
25. N. Hansen, Scr. Mater. 51, 801 (2004).10.1016/j.scriptamat.2004.06.002 ↗
26. F.X. Che, W.N. Putra, A. Heryanto, A. Trigg, X.W. Zhang, and C.L. Gan, IEEE Trans. Compon. Packag. Manuf. Tech. 3, 732 (2013).10.1109/TCPMT.2013.2252955 ↗
27. Y.W. Lin, J.C. Kuo, K.T. Lui, and D. Chen, Mater. Sci. Forum 638, 2841 (2010).10.4028/www.scientific.net/MSF.638-642.2841 ↗
28. C. Weber, Z. Patterson, M. Zhao, R. Balachandran, R. Gouk, S. Verhaverbeke, F. Shadman, and M. Keswani, Mater. Sci. Semicond. Process. 30, 578 (2015).10.1016/j.mssp.2014.10.046 ↗
29. R. Manu and S. Jayakrishnan, Int. J. Mater. Res. 104, 149 (2013).10.3139/146.110848 ↗
30. O.I. Velichko and Y.P. Shaman, Mater. Sci. Semicond. Process. 13, 13 (2010).10.1016/j.mssp.2010.02.001 ↗
31. J. Gruber, A.D. Rollett, and G.S. Rohrer, Acta Mater. 58, 14 (2010).10.1016/j.actamat.2009.08.032 ↗
32. M.E. Gurtin, J. Mech. Phys. Solids 56, 640 (2008).10.1016/j.jmps.2007.05.002 ↗
33. N.E.I. Galindo and P.E.J. Rivera, Acta Mater. 60, 4370 (2012).10.1016/j.actamat.2012.05.003 ↗
34. H. Hallberg and P.A.T, Olsson, J. Mech. Phys. Solids 90, 160 (2016).10.1016/j.jmps.2016.02.026 ↗
35. R.A. Vandermeer, D.J. Jensen, and E. Wold, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 28, 749 (1997).10.1007/s11661-997-0061-2 ↗
36. Y. Qiang and S.K. Esche, Mater. Lett. 56, 47 (2002).10.1016/S0167-577X(02)00415-9 ↗
37. C.C. Merriman, D.P. Field, and P. Trivedi, Mater. Sci. Eng. A 194, 28 (2008).10.1016/j.msea.2007.10.090 ↗
38. Y.S. Zhao and J.Z. Zhang, J. Appl. Crystallogr. 41, 1095 (2008).10.1107/S0021889808031762 ↗
39. D. Raabe, M. Sachtleber, Z. Zhao, F. Roters, and S. Zaefferer, Acta Mater. 49, 3433 (2001).10.1016/S1359-6454(01)00242-7 ↗
40. D. Hamana and M. Hachouf, J. Therm. Anal. Calor. 123, 1063 (2016).10.1007/s10973-015-5066-2 ↗
41. T.F. Jiang, J. Im, R. Huang, and P.S. Ho, MRS Bull. 40, 248 (2015).10.1557/mrs.2015.30 ↗
42. C.L. Wu, T.F. Jiang, J. Im, K.M. Liechti, R. Huang, and P.S. Ho, in IPFA Conference Proceedings (2014), pp. 312–316.
43. A. Heryanto, W.N. Putra, A. Trigg, S. Gao, W.S. Kwon, F.X. Che, X.F. Ang, J. Wei, R.I. Made, C.L. Gan, and K.L. Pey, J. Electron. Mater. 41, 2533 (2012).10.1007/s11664-012-2117-3 ↗