journal article·2010-02

Influence of Asymmetrical Waveform on Low-Cycle Fatigue Life of Micro Solder Joint

Yoshihiko Kanda, Yoshiharu Kariya

Journal of Electronic Materials· Volume 39· Issue 2
Publisher page

Abstract

The effects of waveform symmetry on the low-cycle fatigue life of the Sn-3.0Ag-0.5Cu alloy have been investigated, using micro solder joint specimens with approximately the same volume of solder as is used in actual products. Focusing on crack initiation life, fatigue tests on Sn-Ag-Cu micro solder joints using asymmetrical triangular waveforms revealed no significant reduction in fatigue life. A slight reduction in fatigue life at low strain ranges caused by an increase in the fatigue ductility exponent, which is the result of a weakening microstructure due to loads applied at high temperature for long testing time, was observed. This was due to the fact that grain boundary damage, which has been reported in large-size specimens subjected to asymmetrical triangular waveforms, does not occur in Sn-Ag-Cu micro size solder joints with only a small number of crystal grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. H.D. Solomon and E.D. Tolksdorf, Trans. ASME 117, 130 (1995).
2. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 1229 (1998).10.1007/s11664-998-0074-7 ↗
3. C. Kanchanomai and Y. Mutoh, Mater. Sci. Eng. A 381, 113 (2004).10.1016/j.msea.2004.04.018 ↗
4. S.S. Manson, G.R. Halford, and M.H. Hirshberg, NASA TMX-67838 (1971).
5. G.R. Halfford, M.H. Hirshberg, and S.S. Manson, ASTM STP 520, 658 (1973).
6. K. Hirakawa, K. Tokimasa, and K. Toyama, Tetsu- to- Hagane 7, 184 (1979).
7. T. Haraguchi, Y. Nishiyama, Y. Watanabe, M. Nakamura, and H. Suzuki, Trans. Jpn. Soc. Mech. Eng. A 68, 99 (2002).
8. G.Q. Sun, D.G. Shang, and C.S. Li, Int. J. Fatigue 30, 1821 (2008).10.1016/j.ijfatigue.2008.02.002 ↗
9. S. Taira, M. Fujino, and T. Takahashi, J. Soc. Mater. Sci. Jpn. 27, 34 (1977).
10. Y. Kariya, T. Niimi, T. Suga, and M. Otsuka, Mater. Trans. 46, 2309 (2005).10.2320/matertrans.46.2309 ↗
11. H. Takahashi, M. Mukai, and T. Kawakami, J. Jpn. Electron. Pack. 3, 528 (2000).10.5104/jiep.3.528 ↗
12. Y. Kariya and T. Numazaki, Proc. of Symp. Microjointing Assem. Technol. Electron., vol. 14 (2008), pp. 223–238.
13. Y. Kanda, Y. Kariya, and Y. Mochizuki, Mater. Trans. 49, 1524 (2008).10.2320/matertrans.MF200852 ↗
14. M. Akiyama, Y. Kariya, and T. Ito, Proc. of Symp. Microjointing Assem. Technol. Electron., vol. 15 (2009), pp. 349–352.
15. Y. Kariya, M. Otsuka, and W.J. Plumbridge, J. Electron. Mater. 32, 1398 (2003).10.1007/s11664-003-0107-1 ↗
16. Y. Kariya, T. Morihata, E. Hazawa, and M. Otsuka, J. Electron. Mater. 30, 1184 (2001).10.1007/s11664-001-0148-2 ↗
17. S. Taira, M. Fujino, and M. Yoshida, J. Soc. Mater. Sci. Jpn. 27, 447 (1977).10.2472/jsms.27.447 ↗
18. T. Laurila, T. Mattila, V. Vuorinen, J. Karppinen, J. Li, M. Sippola, and J.K. Kivilahti, Microelectron. Reliab. 47, 1135 (2007).10.1016/j.microrel.2006.07.095 ↗
19. D.W. Henderson, J.J. Woods, T.A. Gosselin, and J. Bartelo, J. Mater. Res. 19, 1608 (2004).10.1557/JMR.2004.0222 ↗
20. M. Kobayashi and Y. Kariya, Collected Abstract of the 2008 Spring Meeting of the Japan Inst. Metals, 427 (2008).