journal article·2005-12

Annealing textures of copper damascene interconnects for ultra-large-scale integration

Hyo Jong Lee, Heung Nam Han, Dong Nyung Lee

Journal of Electronic Materials· Volume 34· Issue 12
Publisher page

Abstract

The annealing textures of copper interconnects depend upon their deposition textures and geometries. The copper interconnects are subjected to tensile stresses even at room temperature, which in turn gives rise to strain energies. The stress distributions in interconnects are not homogeneous due to trenches, resulting in non-fiber-type textures after annealing. To better understand the formation of the non-fiber-type textures, the textures of specimens of 0.2–6 µm in trench width with 0.2 µm in space were measured, and the strain energy and stress distributions have been simulated. The simulation results indicate that strain energy density is highest at the upper corners of trench. Therefore, the grain growth rate at the upper corners is fastest, resulting in the {111}〈110〉 annealing texture. As the trench width increases, the influence of stresses in the trench increases, even though the strain energy density in the trench is relatively low. In this case the {111}〈112〉 component increases, even though the formation of the {111}〈110〉 orientation cannot be excluded.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. C. Ryu (Ph.D. Dissertation, Stanford University, 1998).
2. D.P. Field, D. Dornisch, and H.H. Tong, Scripta Mater. 45, 1069 (2001).10.1016/S1359-6462(01)01141-1 ↗
3. D.N. Lee and H.J. Lee, J. Electron. Mater. 32, 1012 (2003).10.1007/s11664-003-0083-5 ↗
4. D.N. Lee and H.J. Lee, Mater. Sci. Forum 467–470, 1333 (2004).10.4028/www.scientific.net/MSF.467-470.1333 ↗
5. H.J. Lee, D.I. Kim, J.H. Ahn, and D.N. Lee, Thin Solid Films 474, 250 (2005).10.1016/j.tsf.2004.08.141 ↗
6. A. Gangulee, J. Appl. Phys. 43, 867 (1972).10.1063/1.1661296 ↗
7. K.-W. Kwon, C. Ryu, R. Sinclair, and S.S. Wong, Appl. Phys. Lett. 71, 3069 (1997).10.1063/1.119439 ↗
8. C. Lingk, M.E. Gross, and W.L. Brown, Appl. Phys. Lett. 74, 682 (1999).10.1063/1.122986 ↗
9. D.P. Field, J.E. Sanchez, Jr., P.R. Besser, and D.J. Dingley, J. Appl. Phys. 82, 2383 (1997).10.1063/1.365763 ↗
10. L. Vanasupa, Y.-C. Joo, P.R. Besser, and S. Pramanick, J. Appl. Phys. 85, 2583 (1999).10.1063/1.369624 ↗
11. D.-I. Kim, J.-M. Paik, Y.-C. Joo, K.H. Oh, H.-C. Lee, and K. Dicks, Mater. Sci. Forum 408–412, 535 (2002).
12. V. Randle, O. Engler, Introduction to Texture Analysis Macrotexture, Microtexture and Orientation Mapping (Amsterdam, The Netherlands: Gordon and Breach Science Publishers, 2000), pp. 153–188.10.1201/9781482287479 ↗
13. D.N. Lee, Scripta Metall. Mater. 32, 1689 (1995).10.1016/0956-716X(95)00256-U ↗
14. D.N. Lee, Metall. Mater. Int. 5, 410 (1999).
15. D.N. Lee, Int. J. Mech. Sci. 42, 1645 (2000).10.1016/S0020-7403(99)00095-8 ↗
16. D.N. Lee, Mater. Sci. Forum 408–412, 75 (2002).10.4028/www.scientific.net/MSF.408-412.75 ↗
17. D.N. Lee, Z. Metallkd. 96, 259 (2005).10.3139/146.101029 ↗
18. S.H. Brongersma, E. Kerr, I. Vervoort, and K. Maex, Proc. IEEE Int. Interconnect Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 230–232.
19. K. Ueno, T. Ritzdorf, and S. Grace, J. Appl. Phys. 86, 4930 (1999).10.1063/1.371462 ↗
20. S. Lagrange et al., Microelectron. Eng. 50, 449 (2000).10.1016/S0167-9317(99)00314-7 ↗
21. W.H. Yeh et al., Microelectron. J. 32, 579 (2001).10.1016/S0026-2692(01)00035-0 ↗
22. ABAQUS, Version 6.2, General Purpose Finite Element Program (Pawtucket, RI: Hibbit, Karlson, and Sorensen Inc., 2001).
23. R.R. Reeber and K. Wang, Mater. Chem. Phys. 46, 259 (1996).10.1016/S0254-0584(96)01808-1 ↗
24. L. Bornstein, Numerical Data and Functional Relationships in Science and Technology, Group III, Vol. 1, ed. K.H. Hellwege and A.M. Hellwege (New York: Springer, 1966), p. 6.
25. J.H. Zhao, T. Ryan, P.S. Ho, A.J. Mckerrow, and W.-Y. Shih, J. Appl. Phys. 85, 6421 (1999).10.1063/1.370146 ↗
26. J.H. Zhao, Y. Du, M. Morgen, and P.S. Ho, J. Appl. Phys. 87, 1575 (2000).10.1063/1.372054 ↗
27. Smithells Metals Reference Book, 7th ed., ed. E.A. Brandes and G.B. Brook (Amsterdam, The Netherlands: Butterworth-Heinemann, 1999), p. 14–2.
28. CRC Handbook of Materials Science, ed. C.T. Lynch (Boca Raton, FL: CRC Press, 1975), pp. 381–385.
29. Y.-L. Shen, S. Sureth, and I.A. Blech, J. Appl. Phys. 80, 1388 (1996).10.1063/1.362938 ↗
30. C. Lingk and M.E. Gross, J. Appl. Phys. 84, 5547 (1998).10.1063/1.368856 ↗