journal article·2013-06

Influence of Annealing on Electrical Properties of an Organic Thin Layer-Based n-Type InP Schottky Barrier Diode

V. Rajagopal Reddy, A. Umapathi, S. Sankar Naik

Journal of Electronic Materials· Volume 42· Issue 6
Publisher page

Abstract

The electrical properties of a fabricated Au/polymethylmethacrylate (PMMA)/n-InP Schottky barrier diode have been analyzed for different annealing temperatures using current–voltage (I–V) and capacitance–voltage (C–V) techniques. It is observed that the Au/PMMA/n-InP structure shows excellent rectifying behavior. The extracted barrier height and ideality factor of the as-deposited Au/PMMA/n-InP Schottky contact are 0.68 eV (J–V)/0.82 eV (C–V) and 1.57, respectively. However, the barrier height (BH) of the Au/PMMA/n-InP Schottky contact increases to 0.78 eV (J–V)/0.99 eV (C–V) when the contact is annealed at 150°C for 1 min in nitrogen atmosphere. Upon annealing at 200°C, the BH value decreases to 0.72 eV (J–V)/0.90 eV (C–V) and the ideality factor increases to 1.48. The PMMA layer increases the effective barrier height of the structure by creating a physical barrier between the Au metal and the n-InP. Cheung’s functions are also used to calculate the series resistance of the Au/PMMA/n-InP structure. The interface state density (Nss) is found to be 6.380 × 1012 cm−2 eV−1 and 1.916 × 1012 cm−2 eV−1 for the as-deposited and 150°C-annealed Au/PMMA/n-InP Schottky contacts, respectively. These results indicate that the interface state density and series resistance have a significant effect on the electrical characteristics of Au/PMMA/n-InP Schottky barrier devices. Finally, it is noted that the diode parameters change with increasing annealing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. T.-F. Lei, W.-C. Huang, and C.-L. Lee, J. Appl. Phys. 78, 1 (1995).10.1063/1.360652 ↗
2. Zs.J. Horvath, V. Rakovics, B. Szentpali, and S. Puspoki, Phys. Status Solidi C 0, 916 (2003).10.1002/pssc.200306225 ↗
3. P.G. McCafferty, A. Sellai, P. Dawson, and H. Elabd, Solid State Electron. 39, 583 (1996).10.1016/0038-1101(95)00162-X ↗
4. N. Newman, T. Kendelwicz, L. Bowman, and W.E. Spicer, Appl. Phys. Lett. 46, 1176 (1985).10.1063/1.95749 ↗
5. Zs.J. Horvath, V. Rakovics, B. Szentpali, S. Puspoki, and K.Z. Ydansky, Vacuum 71, 113 (2003).10.1016/S0042-207X(02)00723-6 ↗
6. H. Cetin and E. Ayyildiz, Semicond. Sci. Technol. 20, 625 (2005).10.1088/0268-1242/20/6/025 ↗
7. O. Gullu, O. Baris, M. Biber, and A. Turut, Appl. Surf. Sci. 254, 3039 (2008).10.1016/j.apsusc.2007.10.082 ↗
8. M.D. Aydin and F. Yakuphanoglu, J. Phys. Chem. Solids 68, 1770 (2007).10.1016/j.jpcs.2007.04.023 ↗
9. M. El-Sayed, H.M.A. Hamid, and R.M. Radwan, Radiat. Phys. Chem. 69, 339 (2004).10.1016/j.radphyschem.2003.07.001 ↗
10. C. Van Nguyan and K. Pote Kamloth, J. Phys. D Appl. Phys. 33, 2230 (2000).10.1088/0022-3727/33/18/305 ↗
11. M.M. El-Nahass, K.F. Abd-El-Rahman, A.A.M. Farag, and A.A.A. Darwish, Org. Electron. 6, 129 (2005).10.1016/j.orgel.2005.03.007 ↗
12. S. Aydogan, M. Saglam, and A. Turut, Vacuum 77, 269 (2005).10.1016/j.vacuum.2004.10.003 ↗
13. M. Cakar, N. Yildirim, S. Karatas, C. Temirci, and A. Turut, J. Appl. Phys. 100, 074505 (2006).10.1063/1.2355547 ↗
14. A.R. Vearey Roberts and D.A. Evans, Appl. Phys. Lett. 86, 072105 (2005).10.1063/1.1864255 ↗
15. O. Gullu, Microelectron. Eng. 87, 648 (2010).10.1016/j.mee.2009.09.001 ↗
16. M.C. Lorengan, Science 278, 2103 (1997).10.1126/science.278.5346.2103 ↗
17. F.E. Jones, B.P. Wood, J.A. Myers, C.D. Hafar, and M.C. Lorengan, J. Appl. Phys. 86, 6431 (1999).10.1063/1.371707 ↗
18. S. Angappane, N. Rajeev Kini, T.S. Natarajan, G. Rangarajan, and B. Wessling, Thin Solid Films 41, 7202 (2002).
19. O. Gullu, A. Turut, and S. Asubay, J. Phys. Condens. Mater. 20, 045215 (2008).10.1088/0953-8984/20/04/045215 ↗
20. O. Gullu and A. Turut, J. Vac. Sci. Technol., B 28, 466 (2010).10.1116/1.3377141 ↗
21. M. Soylu, B. Abay, and Y. Onganer, J. Phys. Chem. Solids 71, 1398 (2010).10.1016/j.jpcs.2010.07.003 ↗
22. A.A.M. Farag and I.S. Yahia, Synth. Met. 161, 32 (2011).10.1016/j.synthmet.2010.10.030 ↗
23. A. Ashok Kumar, K.S. Shin, V. Rajagopal Reddy, C.J. Choi, V. Janardhanam, M.W. Seo, and H. Hong, J. Electrochem. Soc. 159, H33 (2012).10.1149/2.041201jes ↗
24. V. Rajagopal Reddy, M. Siva Pratap Reddy, A. Ashok Kumar, and C.J. Choi, Thin Solid Films 520, 5715 (2012).10.1016/j.tsf.2012.04.020 ↗
25. N. Koch, ChemPhysChem 8, 1438 (2007).10.1002/cphc.200700177 ↗
26. R. Poddar and C. Luo, Solid State Electron. 50, 1648 (2006).10.1016/j.sse.2006.10.006 ↗
27. W. Wang and E.A. Schiff, Appl. Phys. Lett. 91, 133504 (2007).10.1063/1.2789785 ↗
28. S. Gunes, H. Neugebauer, and N.S. Saricifici, Chem. Rev. 107, 1324 (2007).10.1021/cr050149z ↗
29. S.J. Kim, W.J. Kim, A.N. Cartwright, and P.N. Prasad, Sol. Energ. Mater. Sol. C. 93, 657 (2009).10.1016/j.solmat.2008.12.011 ↗
30. R. Sivakumar, K. Akila, and S. Anandan, Curr. Appl. Phys. 10, 1255 (2010).10.1016/j.cap.2010.03.003 ↗
31. J.M.G. Larajeria, H.J. Khoury, D.M. De Azevedo, E.F. Da Silva, and E.A. De Vasconcelos, Appl. Surf. Sci. 190, 390 (2002).10.1016/S0169-4332(01)00901-1 ↗
32. http://www.cmcbooks.co.jp/report.html .
33. M.N. Kozicki, M. Park, and M. Mitkova, Non-Volatile Memory Technology Symp. (Orlando, FL: NVMTS, 2004), Proc. 2004, 10 (2004).
34. R.H. Williams and G.Y. Robinson, Physics and Chemistry of III-V Compound Semiconductor Interfaces (New York: Plenum, 1985).
35. N. Szydlo and J. Oliver, J. Appl. Phys. 50, 1445 (1979).10.1063/1.326128 ↗
36. Z. Benamara, B. Akkal, A. Talbi, B. Gruzza, and L. Bideux, Mater. Sci. Eng. C 21, 287 (2002).10.1016/S0928-4931(02)00082-6 ↗
37. Z.Q. Shi, R. Wallace, and W.A. Anderson, Appl. Phys. Lett. 59, 446 (1991).10.1063/1.105458 ↗
38. N.G. Semaltianos, Microelectron. J. 38, 754 (2007).10.1016/j.mejo.2007.04.019 ↗
39. U.T. Kampen, S. Park, and D.R.T. Zahn, Appl. Surf. Sci. 190, 461 (2002).10.1016/S0169-4332(01)00919-9 ↗
40. D.R.T. Zahn, T.U. Kampen, and H. Mendez, Appl. Surf. Sci. 423, 212 (2003).
41. S. Aydogan, M. Saglam, and A. Turut, Microelectron. Eng. 85, 278 (2008).10.1016/j.mee.2007.06.004 ↗
42. A. Turut, M. Saglam, H. Efeoglu, N. Yalcin, M. Yildirim, and B. Abay, Phys. B 205, 41 (1995).10.1016/0921-4526(94)00229-O ↗
43. S.K. Cheung and N.W. Cheung, Appl. Phys. Lett. 49, 85 (1986).10.1063/1.97359 ↗
44. H. Norde, J. Appl. Phys. 50, 5052 (1979).10.1063/1.325607 ↗
45. S. Aydogan, M. Saglam, and A. Turut, Polymers 45, 563 (2005).10.1016/j.polymer.2004.11.006 ↗
46. A.F. Ozdemir, A. Turut, and A. Kokce, Thin Solid Films 425, 210 (2003).10.1016/S0040-6090(02)01140-9 ↗
47. A.A.M. Farag, I.S. Yalia, and M. Fadel, Int. J. Hydrogen Energ. 34, 4906 (2009).10.1016/j.ijhydene.2009.03.034 ↗
48. A.M. Goodman, J. Appl. Phys. 34, 329 (1963).10.1063/1.1702608 ↗
49. S.M. Sze, Physics of Semiconductor Devices (New York: Wiley-Interscience, 1981), p. 279.
50. A.M. Cowley, J. Appl. Phys. 34, 3024 (1966).10.1063/1.1703157 ↗
51. M. Soylu and B. Abay, Microelectron. Eng. 86, 88 (2009).10.1016/j.mee.2008.09.045 ↗
52. H. Korkut, N. Yildirim, and A. Turut, Microelectron. Eng. 86, 111 (2009).10.1016/j.mee.2008.10.005 ↗
53. A. Turut, B. Bati, A. Kokce, M. Saglam, and N. Yalcin, Phys. Scripta 53, 118 (1996).10.1088/0031-8949/53/1/023 ↗
54. H.C. Card and E.H. Rhoderick, J. Phys. D Appl. Phys. 4, 1589 (1971).10.1088/0022-3727/4/10/319 ↗
55. S. Pandey and S. Kal, Solid State Electron. 42, 943 (1998).10.1016/S0038-1101(97)00267-0 ↗
56. J.Y. Duboz, F. Binet, N. Laurent, E. Rosencher, F. Scholz, V. Harle, O. Briot, B. Gil, and R.L. Aulombard, Mater. Res. Soc. Sym. Proc. 449, 1085 (1996).10.1557/PROC-449-1085 ↗