journal article·2012-04

Low-Resistance Cu-Sn Electroplated–Evaporated Microbumps for 3D Chip Stacking

M. Murugesan, Y. Ohara, T. Fukushima, T. Tanaka, M. Koyanagi

Journal of Electronic Materials· Volume 41· Issue 4
Publisher page

Abstract

Low-resistance copper-tin (Cu-Sn) microbumps, with sizes varying from 5 μm × 5 μm to 20 μm × 20 μm and formed by electroplating–evaporation bumping (EEB) technology for three-dimensional integration of large-scale integrated chips, have been evaluated for their microstructure and electrical resistance. It was inferred from x-ray diffraction data that the formation of low-resistance Cu3Sn intermetallic compound (IMC) is facilitated at higher bonding temperature. Electron probe microanalysis mapping showed that, even before bonding, Cu-Sn IMCs were formed at the interface between Cu and Sn, whereas they were sandwiched between the Cu of the upper and lower microbumps after bonding. Electron backscatter diffraction analysis revealed that the crystal orientation of Sn grains was sharply localized in the (100) orientation for physical vapor deposited (PVD) sample, while electroplated Sn film exhibited a mixed crystal orientation in all (100), (110), and (001) axes. A resistance value of ~35 mΩ per bump was obtained for Cu-Sn microbumps with area of 400 μm2, which is several times lower than the resistance value reported for Cu-Sn microbumps fabricated by a pure electroplating method. The low resistance value obtained for EEB-formed Cu-Sn microbumps after bonding is explained by (i) the reduced surface roughness for evaporated Sn, (ii) the high degree of crystal grain orientation resulting from layer-by-layer growth in the PVD Sn, despite their smaller grain size, and (iii) the absence of impurity segregation at grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. T. Fukushima, T. Konno, K. Kiyoyama, M. Murugesan, K. Sato, W.C. Jeong, Y. Ohara, A. Noriki, S. Kanno, Y. Kaiho, H. Kino, K. Makita, R. Kobayashi, C.K. Yin, K. Inamura, K.W. Lee, J.C. Bea, T. Tanaka, and M. Koyanagi, IEDM Technical Digest (2008), p. 499.
2. T. Matsumoto, M. Satoh, K. Sakuma, H. Kurino, N. Miyakawa, H. Itani, and M. Koyanagi, Jpn. J. Appl. Phys. 37, 1217 (1998).10.1143/JJAP.37.1217 ↗
3. M. Murugesan J.C. Bea, T. Fukushima, T. Konno, K. Kiyoyama, W.C. Jeong, H. Kino, A. Noriki, K.W. Lee, T. Tanaka, and M. Koyanagi, Proceedings of 58th ECTC (2009), p. 1496.
4. L. Zhang, S. Ou, J. Huang, K.N. Tu, S. Gee, and L. Nguyen, Appl. Phys. Lett. 88, 012106 (2006).10.1063/1.2158702 ↗
5. M. Koyanagi, T. Fukushima, and T. Tanaka, Proc. IEEE 97, 49 (2009).10.1109/JPROC.2008.2007463 ↗
6. C.C. Wei, C.F. Chen, P.C. Liu, and Chih. Chen, J. Appl. Phys. 105, 023715 (2009).10.1063/1.3072662 ↗
7. H. Wang, F. Gao, X. Ma, and Y. Qian, Scr. Mater. 55, 823 (2006).10.1016/j.scriptamat.2006.07.017 ↗
8. F. Bartels and J.W. Morris Jr, J. Electron. Mater. 23, 787 (1994).10.1007/BF02651374 ↗
9. H.T. Lee and M.H. Chen, Mater. Sci. Eng. A 333, 24 (2002).10.1016/S0921-5093(01)01820-2 ↗
10. Alex C.K. So and Y.C. Chan, IEEE Trans. Compon. Packag. Manuf. Tech. B 19, 661 (1996).10.1109/96.533909 ↗
11. R.F. Fields, S.R. Low, and G.K. Lucey Jr, The Metal Science of Joining (Warrendale, PA: TMS, 1992), p. 165.
12. S.H. Lee, H.R. Roh, Z.G. Chen, and Y.H. Kim, J. Electron. Mater. 34, 1446 (2005).10.1007/s11664-005-0204-4 ↗
13. A. He, Q. Liu, and D.G. Ivev, J. Mater. Sci. Mater. Eelectron. 19, 553 (2008).10.1007/s10854-007-9385-3 ↗
14. R.W. Balluffi and L.L. Seigle, Acta Metall. 3, 170 (1955).10.1016/0001-6160(55)90087-0 ↗
15. W. Yang and R.W. Messler, J. Electron. Mater. 23, 765 (1994).10.1007/BF02651371 ↗
16. R. Juskenas, Z. Mockus, S. Kanapeckaite, G. Stalnionis, and A. Survila, Electrochim. Acta 52, 928 (2006).10.1016/j.electacta.2006.06.029 ↗
17. K.S. Kim, J.M. Yang, and J.P. Ahn, Appl. Surf. Sci. 256, 7166 (2010).10.1016/j.apsusc.2010.05.045 ↗
18. Y. Ohara, A. Noriki, K. Sakuma, K.W. Lee, M. Murugesan, J.C. Bea, F. Yamada, T. Fukushima, T. Tanaka, and M. Koyanagi, Proceeding of 3D System Integration Conference (2009). doi: 10.1109/3DIC.2009.5306532 .10.1109/3DIC.2009.5306532 ↗
19. K. Tanida, M. Umemoto, N. Tanaka, Y. Tomita, and K. Takahashi, Jpn. J. Appl. Phys. 43, 2264 (2004).10.1143/JJAP.43.2264 ↗
20. H. Marom and M. Eizenberg, J. Appl. Phys. 99, 123705 (2006).10.1063/1.2204349 ↗
21. W. Tang, K. Xu, P. Wang, and X. Li, Microelectron. Eng. 66, 445 (2003).10.1016/S0167-9317(02)00909-7 ↗
22. Y. Ke, F. Zahid, V. Timshevskii, K. Xia, D. Gall, and H. Guo, Phys. Rev. B 79, 155406 (2009).10.1103/PhysRevB.79.155406 ↗
23. D. Chambonnet, D. Keller, and C. Belouet, Physica C 302, 198 (1998).10.1016/S0921-4534(98)00203-2 ↗
24. X.F. Yu, X. Liu, K. Zhang, and Z.Q. Hu, J. Phys. Condens. Matter 11, 937 (1999).10.1088/0953-8984/11/4/001 ↗
25. W. Wu, S.H. Brongersma, M. Van Hove, and K. Maex, Appl. Phys. Lett. 84, 2838 (2004).10.1063/1.1703844 ↗
26. J.Y. Kim and J. Yu, Appl. Phys. Lett. 92, 092109 (2008).10.1063/1.2890072 ↗
27. T. Nemoto, T. Fukino, S. Tsurekawa, X. Gu, A. Teramoto, and T. Ohmi, Jpn. J. Appl. Phys. 48, 066507 (2009).10.1143/JJAP.48.066507 ↗
28. K. Zeng, R. Stierman, T.C. Chiu, D. Edwards, K. Ano, and K.N. Tu, J. Appl. Phys. 97, 024508 (2005).10.1063/1.1839637 ↗